feat(wallet): migrate-to-seed, Phase 2 — sweep + adopt (fund-safety gated)

Second half of "migrate a legacy wallet to a seed wallet": sweep all funds
into the new seed wallet, then adopt it as the primary wallet.

- Sweep (beginSweepToSeedWallet): z_mergetoaddress ["ANY_TADDR","ANY_ZADDR"]
  -> the new wallet's z-address, at the default fee, limits 0,0. The opid is
  tracked via the existing send-callback pipeline; the txid is persisted.
- Confirming gate (fund-safety): after the sweep, pollSweepStatus() polls the
  tx confirmations + legacy balance. "Make this my wallet" only unlocks once
  the sweep is MINED (>= 1 conf) AND the old wallet is empty — so wallet.dat is
  never swapped while the funds could still bounce back or a remainder is left.
  A too-big-for-one-tx remainder offers a "Sweep remaining" re-sweep.
- Adopt (beginAdoptSeedWallet, background): stop daemon -> move legacy
  wallet.dat to a timestamped .bak (never deleted; restored on failure) ->
  install the new wallet -> restart with -rescan. Exception-safe;
  daemon_restarting_ gates tryConnect + is always cleared; skips the restart
  while shutting down; beginShutdown joins the task first.
- Resume: a pending migration reopens at Sweep, or at Confirming if the sweep
  txid is already recorded (re-derived from the chain) — never re-sweeps blind.
- Secret hygiene: the seed is wiped leaving ShowSeed, on any modal dismiss
  (detected after BeginOverlayDialog), and in App::~App() (same fix applied to
  the seed-backup dialog).

Built both variants; tests + hygiene pass. Two rounds of parallel adversarial
review (12 findings fixed, then a clean re-verify) gate this fund-moving code.
The migration modal uses English literals (as renderBackupDialog does); it gets
translated once the flow is finalized. Live sweep test against a funded wallet
is the next step.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

src/app.cpp

@@ -119,7 +119,14 @@ App::App()
     // deterministic across launches.
     balance_rng_.seed(std::random_device{}());
 }
-App::~App() = default;
+App::~App()
+{
+    // Scrub any seed/phrase secret still resident (e.g. app quit with a backup/migration modal open).
+    if (!seed_migration_seed_.empty())
+        sodium_memzero(&seed_migration_seed_[0], seed_migration_seed_.size());
+    if (!seed_backup_phrase_.empty())
+        sodium_memzero(&seed_backup_phrase_[0], seed_backup_phrase_.size());
+}
 
 namespace {
 // How often auto-balance re-evaluates the pool while active. Long, because switching
@@ -719,8 +726,16 @@ void App::update()
     // One-time reminder to back up the wallet's seed phrase (mnemonic wallets only).
     maybeRemindSeedBackup();
 
-    // Pick up progress/result from a running seed-wallet migration (Phase 1: isolated create).
+    // Pick up progress/result from a running seed-wallet migration (create/sweep/adopt).
     pumpSeedMigration();
+    // While confirming the sweep, poll the tx confirmations + legacy balance every ~5s.
+    if (show_seed_migration_ && seed_migration_step_ == SeedMigrationStep::Confirming) {
+        seed_migration_poll_timer_ -= ImGui::GetIO().DeltaTime;
+        if (seed_migration_poll_timer_ <= 0.0f) {
+            seed_migration_poll_timer_ = 5.0f;
+            pollSweepStatus();
+        }
+    }
 
     // Auto-lock check (only when connected + encrypted + unlocked)
     if (state_.connected && state_.isUnlocked()) {
@@ -2975,10 +2990,16 @@ void App::renderSeedBackupDialog()
     }
 
     if (!ui::material::BeginOverlayDialog(TR("seed_backup_title"), &show_seed_backup_, 540.0f, 0.94f)) {
-        // Dismissed (Esc / outside click / X) — scrub the revealed secret.
         if (seed_backup_fetch_started_) closeAndWipe();
         return;
     }
+    // BeginOverlayDialog flips show_seed_backup_ to false on an Esc / outside-click / X dismiss but
+    // still returns true this frame — catch that here so the revealed secret is always scrubbed.
+    if (!show_seed_backup_) {
+        closeAndWipe();
+        ui::material::EndOverlayDialog();
+        return;
+    }
 
     ui::material::Type().text(ui::material::TypeStyle::H6, TR("seed_backup_title"));
     ImGui::Dummy(ImVec2(0, ui::Layout::spacingSm()));
@@ -3045,13 +3066,20 @@ void App::renderSeedMigrationDialog()
     };
     auto close = [this, &wipeSeed]() { wipeSeed(); show_seed_migration_ = false; };
 
+    // A background op (create/sweep/adopt) can't be cancelled cleanly, so the modal must not be
+    // dismissed mid-op.
+    const bool busy = seed_migration_in_flight_
+                      || seed_migration_step_ == SeedMigrationStep::Sweeping
+                      || seed_migration_step_ == SeedMigrationStep::Adopting;
+
     if (!ui::material::BeginOverlayDialog("Migrate to a seed wallet", &show_seed_migration_, 580.0f, 0.94f)) {
-        // Block dismiss while the background create is running (it can't be cancelled cleanly);
+        if (!busy) wipeSeed();
-        // otherwise a dismiss wipes the revealed seed.
-        if (seed_migration_in_flight_) show_seed_migration_ = true;
-        else wipeSeed();
         return;
     }
+    // BeginOverlayDialog flips show_seed_migration_ to false on an Esc / outside-click / X dismiss
+    // (but still returns true this frame). Veto the dismiss while busy; otherwise it's handled by
+    // the post-EndOverlayDialog wipe below.
+    if (!show_seed_migration_ && busy) show_seed_migration_ = true;
 
     ui::material::Type().text(ui::material::TypeStyle::H6, "Migrate to a seed wallet");
     ImGui::Dummy(ImVec2(0, ui::Layout::spacingSm()));
@@ -3114,8 +3142,11 @@ void App::renderSeedMigrationDialog()
         ImGui::PopStyleColor();
         ImGui::Separator();
         if (!seed_migration_backed_up_) ImGui::BeginDisabled();
-        if (ui::material::StyledButton("Done", ImVec2(120, 0)))
+        if (ui::material::StyledButton("Continue to sweep", ImVec2(170, 0))) {
-            close();
+            wipeSeed();  // the sweep/adopt steps only use the address, never the seed itself
+            seed_migration_step_ = SeedMigrationStep::Sweep;
+            refreshSeedMigrationBalance();
+        }
         if (!seed_migration_backed_up_) ImGui::EndDisabled();
         ImGui::SameLine();
         if (ui::material::StyledButton("Discard migration", ImVec2(160, 0))) {
@@ -3137,21 +3168,125 @@ void App::renderSeedMigrationDialog()
         break;
     }
 
+    case SeedMigrationStep::Sweep:
+        ImGui::TextWrapped("Now sweep all funds from your current wallet into the new seed wallet. "
+                           "This sends a single transaction to the new wallet's address; your seed "
+                           "phrase (already backed up) controls the funds from here on.");
+        ImGui::Spacing();
+        ImGui::TextColored(ImGui::ColorConvertU32ToFloat4(ui::material::OnSurfaceMedium()),
+                           "Current wallet balance: %.8f DRGX (minus a small fee)", seed_migration_balance_);
+        ImGui::TextWrapped("To: %s", seed_migration_dest_.c_str());
+        if (state_.isLocked()) {
+            ImGui::Spacing();
+            ImGui::PushStyleColor(ImGuiCol_Text, ui::material::Error());
+            ImGui::TextWrapped("Unlock your wallet first to spend from it.");
+            ImGui::PopStyleColor();
+        }
+        ImGui::Spacing();
+        ImGui::Separator();
+        {
+            const bool canSweep = !state_.isLocked() && seed_migration_balance_ > 0.0;
+            if (!canSweep) ImGui::BeginDisabled();
+            if (ui::material::StyledButton("Sweep all funds", ImVec2(170, 0)))
+                beginSweepToSeedWallet();
+            if (!canSweep) ImGui::EndDisabled();
+        }
+        ImGui::SameLine();
+        if (ui::material::StyledButton("Refresh", ImVec2(110, 0)))
+            refreshSeedMigrationBalance();
+        ImGui::SameLine();
+        if (ui::material::StyledButton("Later", ImVec2(100, 0)))
+            close();  // pending state persists; resumes here next time
+        break;
+
+    case SeedMigrationStep::Sweeping:
+        ImGui::TextWrapped("Sweeping your funds into the new wallet…");
+        ImGui::Spacing();
+        if (!seed_migration_status_.empty())
+            ImGui::TextColored(ImGui::ColorConvertU32ToFloat4(ui::material::OnSurfaceMedium()),
+                               "%s", seed_migration_status_.c_str());
+        break;
+
+    case SeedMigrationStep::Confirming: {
+        const ImVec4 medium = ImGui::ColorConvertU32ToFloat4(ui::material::OnSurfaceMedium());
+        const double dust = DRAGONX_DEFAULT_FEE;  // treat <= one fee as "empty"
+        const bool confirmed = seed_migration_sweep_confs_ >= 1;
+        const bool legacyEmpty = seed_migration_legacy_remaining_ >= 0.0 &&
+                                 seed_migration_legacy_remaining_ <= dust;
+        ImGui::TextWrapped("Waiting for the sweep to confirm on-chain before switching wallets — "
+                           "this guarantees your funds have actually moved.");
+        ImGui::Spacing();
+        ImGui::TextColored(medium, "Sweep confirmations: %d", seed_migration_sweep_confs_);
+        if (!seed_migration_sweep_txid_.empty())
+            ImGui::TextColored(medium, "txid: %s", seed_migration_sweep_txid_.c_str());
+        if (seed_migration_legacy_remaining_ >= 0.0)
+            ImGui::TextColored(medium, "Remaining in old wallet: %.8f DRGX",
+                               seed_migration_legacy_remaining_);
+        ImGui::Spacing();
+        ImGui::Separator();
+        if (confirmed && legacyEmpty) {
+            if (ui::material::StyledButton("Make this my wallet", ImVec2(180, 0)))
+                beginAdoptSeedWallet();
+        } else if (confirmed && !legacyEmpty) {
+            ImGui::PushStyleColor(ImGuiCol_Text, ui::material::Error());
+            ImGui::TextWrapped("Some funds are still in your old wallet (too many inputs for one "
+                               "transaction) — sweep the remainder before switching.");
+            ImGui::PopStyleColor();
+            if (ui::material::StyledButton("Sweep remaining", ImVec2(180, 0)))
+                beginSweepToSeedWallet();
+        } else {
+            ImGui::TextColored(medium, "Waiting for the sweep transaction to be mined…");
+        }
+        ImGui::SameLine();
+        if (ui::material::StyledButton("Refresh", ImVec2(110, 0)))
+            pollSweepStatus();
+        ImGui::SameLine();
+        if (ui::material::StyledButton("Later", ImVec2(100, 0)))
+            close();  // pending state + txid persist; resumes here next time
+        break;
+    }
+
+    case SeedMigrationStep::Adopting:
+        ImGui::TextWrapped("Installing your new wallet and rescanning…");
+        ImGui::Spacing();
+        if (!seed_migration_status_.empty())
+            ImGui::TextColored(ImGui::ColorConvertU32ToFloat4(ui::material::OnSurfaceMedium()),
+                               "%s", seed_migration_status_.c_str());
+        break;
+
+    case SeedMigrationStep::Done:
+        ImGui::PushStyleColor(ImGuiCol_Text, ImVec4(0.3f, 0.8f, 0.3f, 1.0f));
+        ImGui::TextWrapped("Migration complete. Your wallet is now backed by your seed phrase.");
+        ImGui::PopStyleColor();
+        ImGui::Spacing();
+        ImGui::TextWrapped("The daemon is rescanning to show your funds — this can take a few "
+                           "minutes. Your previous wallet was saved as a .bak in the data folder.");
+        if (!seed_migration_status_.empty()) {  // a non-fatal warning (e.g. the daemon didn't restart)
+            ImGui::Spacing();
+            ImGui::PushStyleColor(ImGuiCol_Text, ui::material::Error());
+            ImGui::TextWrapped("%s", seed_migration_status_.c_str());
+            ImGui::PopStyleColor();
+        }
+        ImGui::Spacing();
+        ImGui::Separator();
+        if (ui::material::StyledButton("Done", ImVec2(120, 0)))
+            close();
+        break;
+
     case SeedMigrationStep::Error:
         ImGui::PushStyleColor(ImGuiCol_Text, ui::material::Error());
         ImGui::TextWrapped("%s", seed_migration_status_.c_str());
         ImGui::PopStyleColor();
         ImGui::Spacing();
         ImGui::Separator();
-        if (ui::material::StyledButton("Back", ImVec2(120, 0)))
-            seed_migration_step_ = SeedMigrationStep::Intro;
-        ImGui::SameLine();
         if (ui::material::StyledButton("Close", ImVec2(120, 0)))
             close();
         break;
     }
 
     ui::material::EndOverlayDialog();
+    // A real dismiss (Esc/outside/X) or a button close() leaves the flag false — scrub the seed.
+    if (!show_seed_migration_) wipeSeed();
 }
 
 void App::renderAntivirusHelpDialog()
@@ -3700,6 +3835,11 @@ void App::beginShutdown()
     shutdown_timer_ = 0.0f;
     shutdown_start_time_ = std::chrono::steady_clock::now();
     async_tasks_.cancelAll();
+    // The seed-migration adopt task drives daemon stop/start and swaps wallet.dat; let it finish
+    // before shutdown touches the daemon, so the two never race. shutting_down_ is already set, so
+    // the adopt task will NOT restart the daemon (it checks shutting_down_ before startEmbeddedDaemon).
+    if (async_tasks_.isRunning("Adopt seed wallet"))
+        async_tasks_.join("Adopt seed wallet");
 
     // Signal the RPC worker to stop accepting new tasks (non-blocking), and abort any call
     // already in flight so the later join() doesn't wait out a request timeout.

src/app.h

@@ -353,7 +353,7 @@ public:
     void showExportKeyDialog() { show_export_key_ = true; }
     void showBackupDialog() { show_backup_ = true; }
     void showSeedBackupDialog() { show_seed_backup_ = true; }
-    void showSeedMigrationDialog() { show_seed_migration_ = true; seed_migration_step_ = SeedMigrationStep::Intro; }
+    void showSeedMigrationDialog();  // opens the migration modal (resumes a pending one at Sweep)
     void showAboutDialog() { show_about_ = true; }
     
     // Legacy tab compat — maps int to NavPage
@@ -616,6 +616,11 @@ private:
     // Seed-wallet migration (Phase 1: create a new mnemonic wallet in isolation, no funds moved).
     void beginCreateSeedWallet();  // starts the isolated create on a background thread
     void pumpSeedMigration();      // main thread: pick up background progress/result each frame
+    // Phase 2: sweep all legacy funds into the new wallet, then adopt it as the primary wallet.
+    void refreshSeedMigrationBalance();  // query the legacy total (shown on the Sweep step)
+    void beginSweepToSeedWallet();       // z_mergetoaddress ["ANY_TADDR","ANY_ZADDR"] -> dest
+    void pollSweepStatus();              // Confirming step: poll sweep confirmations + legacy balance
+    void beginAdoptSeedWallet();         // stop daemon -> swap wallet.dat -> restart with -rescan
     void provisionChatIdentityFromSecret(std::string secret);
     std::string chatReplyZaddr();                                // a stable (persisted) wallet z-addr for chat
     std::string generateChatLocalId(const char* prefix, int numBytes) const;  // unique echo id / cid
@@ -684,22 +689,32 @@ private:
     bool seed_backup_no_mnemonic_ = false;
     bool seed_backup_reminder_in_flight_ = false;  // guards the one-time backup nudge probe
 
-    // --- Seed-wallet migration (Phase 1: isolated seed-wallet creation) ---
+    // --- Seed-wallet migration (Phase 1: create; Phase 2: sweep + adopt) ---
-    enum class SeedMigrationStep { Intro, Working, ShowSeed, Error };
+    enum class SeedMigrationStep { Intro, Working, ShowSeed, Sweep, Sweeping, Confirming, Adopting, Done, Error };
     bool show_seed_migration_ = false;
     SeedMigrationStep seed_migration_step_ = SeedMigrationStep::Intro;
-    bool seed_migration_in_flight_ = false;      // main-thread guard while the bg task runs
+    bool seed_migration_in_flight_ = false;      // main-thread guard while the bg create task runs
     std::string seed_migration_seed_;            // SECRET — the revealed phrase, wiped on close
     std::string seed_migration_dest_;            // new shielded z-address (Phase 2 sweep target)
-    std::string seed_migration_temp_dir_;        // temp datadir holding the new wallet (kept)
+    std::string seed_migration_temp_dir_;        // temp datadir root holding the new wallet (kept)
     bool seed_migration_backed_up_ = false;      // "I've written it down" confirmation
     std::string seed_migration_status_;          // main-thread display (progress / error text)
+    double seed_migration_balance_ = 0.0;        // legacy total to sweep (shown on the Sweep step)
+    std::string seed_migration_sweep_txid_;      // the z_mergetoaddress sweep transaction id
+    int seed_migration_sweep_confs_ = 0;         // confirmations of the sweep tx (adopt gate: >= 1)
+    double seed_migration_legacy_remaining_ = -1.0;  // legacy balance after sweep (-1 = unknown)
+    float seed_migration_poll_timer_ = 0.0f;     // throttles the Confirming-step poll
+    bool seed_migration_confirm_in_flight_ = false;  // guards the confirm poll
     // Cross-thread handoff from the background create task (guarded by seed_migration_mutex_).
     std::mutex seed_migration_mutex_;
     std::string seed_migration_progress_;        // latest progress line
-    bool seed_migration_done_ = false;           // result ready to consume
+    bool seed_migration_done_ = false;           // create result ready to consume
     bool seed_migration_ok_ = false;
     std::string seed_migration_r_seed_, seed_migration_r_dest_, seed_migration_r_tmp_, seed_migration_r_err_;
+    // Cross-thread handoff from the background adopt task (guarded by seed_migration_mutex_).
+    bool seed_migration_adopt_done_ = false;
+    bool seed_migration_adopt_ok_ = false;
+    std::string seed_migration_adopt_err_;
 
     // Embedded daemon state
     bool use_embedded_daemon_ = wallet::supportsEmbeddedDaemon(wallet::currentWalletCapabilities());

src/app_network.cpp

@@ -39,6 +39,7 @@
 #include "config/settings.h"
 #include "wallet/lite_wallet_controller.h"  // lite send/new-address routing
 #include "wallet/lite_wallet_state_mapper.h"  // LiteWalletAppRefreshModel for lite chat harvest
+#include "config/version.h"
 #include "daemon/daemon_controller.h"
 #include "daemon/embedded_daemon.h"
 #include "daemon/seed_wallet_creator.h"
@@ -60,6 +61,8 @@
 #include <cmath>
 #include <ctime>
 #include <filesystem>
+#include <thread>
+#include <chrono>
 #include <fstream>
 #include <utility>
 
@@ -210,6 +213,10 @@ void App::tryConnect()
 
     if (connection_in_progress_) return;
 
+    // Don't fight an in-progress restart/adopt orchestration: while it stops the daemon, swaps
+    // wallet.dat (seed migration), and restarts, tryConnect must NOT start the daemon underneath it.
+    if (daemon_restarting_) return;
+
     static int connect_attempt = 0;
     ++connect_attempt;
 
@@ -2956,8 +2963,247 @@ void App::beginCreateSeedWallet()
     });
 }
 
+void App::showSeedMigrationDialog()
+{
+    show_seed_migration_ = true;
+    // Resume a pending migration. If a sweep was already submitted (txid persisted), resume at the
+    // confirm/adopt stage — re-derived from the chain — rather than sweeping again; otherwise start
+    // at the Sweep step. With no pending migration, start fresh at the intro.
+    if (settings_ && settings_->getSeedMigrationPending() && !settings_->getSeedMigrationDest().empty()) {
+        seed_migration_dest_ = settings_->getSeedMigrationDest();
+        seed_migration_temp_dir_ = settings_->getSeedMigrationTempDir();
+        seed_migration_sweep_txid_ = settings_->getSeedMigrationSweepTxid();
+        if (!seed_migration_sweep_txid_.empty()) {
+            seed_migration_sweep_confs_ = 0;
+            seed_migration_legacy_remaining_ = -1.0;
+            seed_migration_poll_timer_ = 0.0f;  // poll immediately
+            seed_migration_step_ = SeedMigrationStep::Confirming;
+        } else {
+            seed_migration_step_ = SeedMigrationStep::Sweep;
+            refreshSeedMigrationBalance();
+        }
+    } else {
+        seed_migration_step_ = SeedMigrationStep::Intro;
+    }
+}
+
+void App::refreshSeedMigrationBalance()
+{
+    if (!rpc_ || !worker_ || !state_.connected) return;
+    worker_->post([this]() -> rpc::RPCWorker::MainCb {
+        double total = 0.0; bool ok = false;
+        rpc::RPCClient::TraceScope trace("Migrate / balance");
+        try {
+            auto res = rpc_->call("z_gettotalbalance");
+            if (res.contains("total") && res["total"].is_string())
+                total = std::stod(res["total"].get<std::string>());
+            ok = true;
+        } catch (...) {}
+        return [this, total, ok]() { if (ok) seed_migration_balance_ = total; };
+    });
+}
+
+// Phase 2 step 1: sweep ALL legacy funds (transparent + shielded) into the new seed wallet's
+// address. z_mergetoaddress with 0,0 limits merges as many inputs as fit in one transaction; a
+// huge-input wallet may leave a small remainder in the (preserved) legacy backup.
+void App::beginSweepToSeedWallet()
+{
+    if (!rpc_ || !worker_ || !state_.connected) {
+        seed_migration_status_ = "Not connected to the daemon.";
+        seed_migration_step_ = SeedMigrationStep::Error; return;
+    }
+    if (seed_migration_dest_.empty()) {
+        seed_migration_status_ = "No destination address for the sweep.";
+        seed_migration_step_ = SeedMigrationStep::Error; return;
+    }
+    seed_migration_step_ = SeedMigrationStep::Sweeping;
+    seed_migration_status_ = "Building the sweep transaction…";
+    const std::string dest = seed_migration_dest_;
+    worker_->post([this, dest]() -> rpc::RPCWorker::MainCb {
+        std::string opid, err;
+        rpc::RPCClient::TraceScope trace("Migrate / sweep");
+        try {
+            json fromAddrs = json::array({"ANY_TADDR", "ANY_ZADDR"});
+            auto res = rpc_->call("z_mergetoaddress", {fromAddrs, dest, DRAGONX_DEFAULT_FEE, 0, 0});
+            opid = res.value("opid", std::string());
+            if (opid.empty()) err = "The daemon returned no operation id for the sweep.";
+        } catch (const std::exception& e) { err = e.what(); }
+        return [this, opid, err]() {
+            if (!err.empty() || opid.empty()) {
+                seed_migration_status_ = err.empty() ? "The sweep failed to start." : err;
+                seed_migration_step_ = SeedMigrationStep::Error;
+                return;
+            }
+            pending_send_callbacks_[opid] = [this](bool ok, const std::string& result) {
+                if (ok) {
+                    seed_migration_sweep_txid_ = result;
+                    // Persist the txid so a restart resumes at the confirm/adopt stage and never
+                    // re-sweeps from scratch. The Confirming step gates adopt on this tx being mined
+                    // (>= 1 confirmation) AND the legacy balance dropping to ~0.
+                    if (settings_) { settings_->setSeedMigrationSweepTxid(result); settings_->save(); }
+                    seed_migration_sweep_confs_ = 0;
+                    seed_migration_legacy_remaining_ = -1.0;
+                    seed_migration_poll_timer_ = 0.0f;
+                    seed_migration_status_.clear();
+                    seed_migration_step_ = SeedMigrationStep::Confirming;
+                } else {
+                    seed_migration_status_ = result.empty() ? "The sweep transaction failed." : result;
+                    seed_migration_step_ = SeedMigrationStep::Error;
+                }
+            };
+            trackOperation(opid);
+            seed_migration_status_ = "Waiting for the sweep transaction to be accepted…";
+        };
+    });
+}
+
+// Confirming step: poll the sweep tx's confirmations + the legacy wallet's remaining balance. The
+// adopt step is gated on the tx being mined (confs >= 1) AND the legacy balance being ~0, so we
+// never swap wallet.dat while the funds could still bounce back (dropped/reorged tx) or while a
+// remainder is left behind (a sweep too big for one transaction).
+void App::pollSweepStatus()
+{
+    if (!rpc_ || !worker_ || !state_.connected) return;
+    if (seed_migration_confirm_in_flight_ || seed_migration_sweep_txid_.empty()) return;
+    seed_migration_confirm_in_flight_ = true;
+    const std::string txid = seed_migration_sweep_txid_;
+    worker_->post([this, txid]() -> rpc::RPCWorker::MainCb {
+        int confs = 0; double remaining = -1.0; bool ok = false;
+        rpc::RPCClient::TraceScope trace("Migrate / confirm");
+        try {
+            auto tx = rpc_->call("gettransaction", {txid});
+            if (tx.contains("confirmations") && tx["confirmations"].is_number())
+                confs = tx["confirmations"].get<int>();
+            auto bal = rpc_->call("z_gettotalbalance");
+            if (bal.contains("total") && bal["total"].is_string())
+                remaining = std::stod(bal["total"].get<std::string>());
+            ok = true;
+        } catch (...) {}
+        return [this, confs, remaining, ok]() {
+            seed_migration_confirm_in_flight_ = false;
+            if (ok) {
+                seed_migration_sweep_confs_ = confs;
+                seed_migration_legacy_remaining_ = remaining;
+            }
+        };
+    });
+}
+
+// Phase 2 step 2: adopt the new seed wallet as the primary wallet. Stop the daemon, move the
+// legacy wallet.dat aside to a timestamped backup (NEVER delete it), copy the new wallet in, and
+// restart with -rescan so the new keys pick up the swept funds. Runs on a background thread.
+void App::beginAdoptSeedWallet()
+{
+    seed_migration_step_ = SeedMigrationStep::Adopting;
+    seed_migration_status_ = "Restarting with your new wallet — this rescan can take a while…";
+    { std::lock_guard<std::mutex> lk(seed_migration_mutex_); seed_migration_adopt_done_ = false; }
+    // Gate the main-loop reconnect so tryConnect can't start the daemon while we swap wallet.dat.
+    daemon_restarting_ = true;
+    if (rpc_ && rpc_->isConnected()) rpc_->disconnect();
+    onDisconnected("Adopting seed wallet");
+    const std::string base = seed_migration_temp_dir_;
+    async_tasks_.submit("Adopt seed wallet", [this, base](const util::AsyncTaskManager::Token&) {
+        namespace fs = std::filesystem;
+        std::string err;       // fatal (swap did not happen; migration incomplete)
+        std::string warn;      // non-fatal (swap done but the daemon did not restart)
+        bool swapDone = false;
+        try {
+            std::error_code ec;
+            // 1. Stop the main daemon and wait for it to fully exit.
+            stopEmbeddedDaemon();
+            for (int i = 0; i < 60 && isEmbeddedDaemonRunning(); ++i)
+                std::this_thread::sleep_for(std::chrono::milliseconds(500));
+            if (isEmbeddedDaemonRunning()) {
+                err = "The daemon did not stop in time; your wallet was not changed.";
+            } else {
+                // 2. Swap wallet.dat. Move the legacy one aside to a timestamped backup (NEVER
+                //    delete), then copy the new seed wallet in. On any failure, restore the legacy.
+                const std::string datadir = util::Platform::getDragonXDataDir();
+                const std::string legacy = datadir + "/wallet.dat";
+                const std::string newWallet = base + "/DRAGONX/wallet.dat";
+                std::time_t t = std::time(nullptr);
+                std::tm tmv{}; localtime_r(&t, &tmv);  // thread-safe (the UI thread also uses localtime)
+                char ts[32]; std::strftime(ts, sizeof(ts), "%Y%m%d-%H%M%S", &tmv);
+                const std::string backup = legacy + ".legacy-migrated-" + ts + ".bak";
+                if (!fs::exists(newWallet)) {
+                    err = "The new wallet file is missing; your wallet was not changed.";
+                } else {
+                    bool movedLegacy = false;
+                    if (fs::exists(legacy)) {
+                        fs::rename(legacy, backup, ec);
+                        if (ec) err = "Could not back up your current wallet; nothing was changed.";
+                        else movedLegacy = true;
+                    }
+                    if (err.empty()) {
+                        fs::copy_file(newWallet, legacy, fs::copy_options::overwrite_existing, ec);
+                        if (ec) {
+                            if (movedLegacy) { std::error_code ec2; fs::rename(backup, legacy, ec2); }
+                            err = "Could not install the new wallet; your original wallet was restored.";
+                        } else {
+                            swapDone = true;
+                        }
+                    }
+                }
+            }
+
+            // 3. Rescan on next start (only if the swap happened) and bring the daemon back up —
+            //    unless we're quitting, in which case don't resurrect it.
+            if (swapDone && daemon_controller_) daemon_controller_->setRescanOnNextStart(true);
+            if (!shutting_down_) {
+                if (!startEmbeddedDaemon() && swapDone)
+                    warn = "Your wallet was swapped, but the daemon did not restart — start it from Settings.";
+            }
+        } catch (const std::exception& e) {
+            err = std::string("Migration failed: ") + e.what();
+        } catch (...) {
+            err = "Migration failed due to an unexpected error.";
+        }
+        daemon_restarting_ = false;  // ALWAYS re-arm the reconnect gate, even on a throw
+
+        std::lock_guard<std::mutex> lk(seed_migration_mutex_);
+        // Migration counts as done once the swap succeeded (funds already moved + wallet installed);
+        // a restart hiccup is only a warning. If the swap never happened, it's a full error and the
+        // pending state is kept so the user can retry.
+        seed_migration_adopt_ok_ = swapDone;
+        seed_migration_adopt_err_ = swapDone ? warn : err;
+        seed_migration_adopt_done_ = true;
+    });
+}
+
 void App::pumpSeedMigration()
 {
+    // --- Adopt handoff (Phase 2, background daemon swap) ---
+    {
+        bool done = false, ok = false; std::string err;
+        {
+            std::lock_guard<std::mutex> lk(seed_migration_mutex_);
+            if (seed_migration_adopt_done_) {
+                done = true; ok = seed_migration_adopt_ok_; err = seed_migration_adopt_err_;
+                seed_migration_adopt_done_ = false;
+            }
+        }
+        if (done) {
+            if (ok) {
+                if (!seed_migration_temp_dir_.empty()) {
+                    std::error_code ec; std::filesystem::remove_all(seed_migration_temp_dir_, ec);
+                }
+                if (settings_) {
+                    settings_->setSeedMigrationPending(false);
+                    settings_->setSeedMigrationDest("");
+                    settings_->setSeedMigrationTempDir("");
+                    settings_->setSeedMigrationSweepTxid("");
+                    settings_->save();
+                }
+                seed_migration_status_ = err;  // a non-empty warning here (e.g. restart hiccup) is shown on Done
+                seed_migration_step_ = SeedMigrationStep::Done;
+            } else {
+                seed_migration_status_ = err.empty() ? "Adopting the new wallet failed." : err;
+                seed_migration_step_ = SeedMigrationStep::Error;
+            }
+        }
+    }
+
+    // --- Create handoff (Phase 1, background isolated create) ---
     if (!seed_migration_in_flight_) return;
     bool done = false, ok = false;
     std::string seed, dest, tmp, err;

src/config/settings.cpp

@@ -203,6 +203,7 @@ bool Settings::load(const std::string& path)
         loadScalar(j, "seed_migration_pending", seed_migration_pending_);
         loadScalar(j, "seed_migration_dest", seed_migration_dest_);
         loadScalar(j, "seed_migration_temp_dir", seed_migration_temp_dir_);
+        loadScalar(j, "seed_migration_sweep_txid", seed_migration_sweep_txid_);
         loadScalar(j, "auto_lock_timeout", auto_lock_timeout_);
         loadScalar(j, "unlock_duration", unlock_duration_);
         loadScalar(j, "pin_enabled", pin_enabled_);
@@ -440,6 +441,7 @@ bool Settings::save(const std::string& path)
     j["seed_migration_pending"] = seed_migration_pending_;
     j["seed_migration_dest"] = seed_migration_dest_;
     j["seed_migration_temp_dir"] = seed_migration_temp_dir_;
+    j["seed_migration_sweep_txid"] = seed_migration_sweep_txid_;
     j["auto_lock_timeout"] = auto_lock_timeout_;
     j["unlock_duration"] = unlock_duration_;
     j["pin_enabled"] = pin_enabled_;

src/config/settings.h

@@ -258,6 +258,10 @@ public:
     void setSeedMigrationDest(const std::string& v) { seed_migration_dest_ = v; }
     std::string getSeedMigrationTempDir() const { return seed_migration_temp_dir_; }
     void setSeedMigrationTempDir(const std::string& v) { seed_migration_temp_dir_ = v; }
+    // The sweep transaction id, persisted once the sweep is submitted — non-empty means the
+    // migration is past the sweep, so a resume goes to the confirm/adopt stage (not sweep again).
+    std::string getSeedMigrationSweepTxid() const { return seed_migration_sweep_txid_; }
+    void setSeedMigrationSweepTxid(const std::string& v) { seed_migration_sweep_txid_ = v; }
 
     // Security — auto-lock timeout (seconds; 0 = disabled)
     int getAutoLockTimeout() const { return auto_lock_timeout_; }
@@ -461,6 +465,7 @@ private:
     bool seed_migration_pending_ = false;
     std::string seed_migration_dest_;
     std::string seed_migration_temp_dir_;
+    std::string seed_migration_sweep_txid_;
     int auto_lock_timeout_ = 900;   // 15 minutes
     int unlock_duration_ = 600;     // 10 minutes
     bool pin_enabled_ = false;