P2 robustness batch (localized):
- W5-1 (Med, lite): persistAfterBroadcast returned false on a persistent post-send/shield
save failure, but both callers discarded it and it never logged — completely silent. It
now liteLogs the failure (the spent note re-derives on the next sync, so it's a
robustness gap, not fund loss).
- W5-2 (Med, lite): the post-sync and post-rescan save results (in the detached scan
threads) were ignored; both now liteLog on failure. LiteDiagnostics::log is mutex-guarded,
so it's safe from those threads.
- W6-1 (Med): WalletState::clear() didn't reset mining/pool_mining, so a wallet switch could
briefly show the previous wallet's hashrate/blocks. Now reset in clear() (the daemon
restarts on switch, so mining genuinely stops).
- W6-3 (Low): AddressBook::load() cleared entries_ then threw on the first non-object array
element — discarding EVERY contact. It now guards is_object() + per-entry try/catch,
skipping and counting malformed entries.
Build-clean; ctest 1/1. Remaining P2: W6-2 (refresh-staleness badge — needs UI, overlaps
the diagnostics Foundation bundle). See docs/wallet-hardening.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The lite create/open/restore requests carried a passphrase field that the UI collected
(a labeled, masked "passphrase" input) but the backend initialize* calls never used —
so a user could believe their lite wallet was passphrase-protected at creation when it
did nothing. It now has a real meaning, wired in LiteWalletController:
- create / restore -> encryptWallet(passphrase): the backend encrypts + locks + saves
the brand-new wallet.
- open -> unlockWallet(passphrase), but only when encryptionStatus() reports the existing
wallet is actually encrypted + locked (no spurious unlock on an unencrypted wallet).
encryptWallet/unlockWallet take their own copy of the passphrase and wipe it; the
request copy is still wiped as before. A post-create encrypt failure is liteLog'd (the
wallet still exists, so the create is not failed).
Six existing lite-controller tests carried an incidental "hunter2" create passphrase from
when the field was dead; removed (they exercise non-encryption flows and want an
unencrypted wallet), and added testLiteWalletControllerCreateEncryptsWithPassphrase to
prove the new behavior. Completes the wallet-hardening P0-A cluster (7/7). ctest 1/1.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Dev-branch audit (docs/_archive/security-audit-dev-2026-07-22.md) re-found the
master issues (absent on dev) plus new ones in dev-only code. Applied here;
full-node build + test suite green; the subtle fixes were adversarially re-verified.
Ported from the master remediation (adapted to dev's code):
- bootstrap: reject zip-slip / path-traversal archive members (isSafeArchivePath)
before writing (S2-1). (dev already fail-closes on a missing checksum.)
- xmrig updater: fail closed when a signature is required but no key is pinned (F1-1).
- http_download.httpGetString: 16 MiB hard cap + MAXFILESIZE on the shared
metadata/price fetch (F1-2 / caps the updater + exchange paths at one site).
- rpc_client: explicit SSL_VERIFYPEER/VERIFYHOST (F4-1) and a 256 MiB response
cap in WriteCallback (F4-3).
- lite_connection_service: reject remote http:// lite servers, loopback only (L1-1).
Loopback is matched by a strict dotted-decimal 127.0.0.0/8 check (not a
startsWith("127.") prefix, which would wrongly accept 127.0.0.1.evil.com), with
userinfo/fragment stripping.
- lite controller: propagate encrypt/decrypt save() failure instead of reporting
success (F7-1).
- xmrig_manager: chmod(0600) the pool config before writing secrets (F5-2).
- app: clear the copied secret from the OS clipboard on shutdown (F3b-1).
- export_transactions: neutralize CSV/spreadsheet formula injection (F13-1).
- build pipeline: build-from-source lite backend + remove the self-attested
CMake signature gate (F15-1); pinned+verified appimagetool (F15-3/4);
verified Sapling params in setup.sh (F15-6); build.sh exits 0 on success.
(F14-1 empty-quoted-arg and F8-2 NUL-termination were already fixed on dev.)
Dev-only findings:
- rpc_client.callRaw: scrub the raw buffer + parsed tree (templated scrubJsonSecrets
for ordered_json) so console dumpprivkey/z_exportkey keys don't linger in freed
heap (N1-1).
- seed_wallet_creator: wipe the exported mnemonic on the failure path so a discarded
failed result never carries a live seed (W1-2).
- export_all_keys: write the plaintext key dump 0600 + atomically via
writeFileAtomically (U1-2).
- chat_database: restrict chat_messages.sqlite and its WAL/SHM sidecars to owner-only (C3-1).
Not done (need a decision, documented in the report):
- Chat header metadata (cid/z/p) rides outside the AEAD (C1/C2) — binding it is a
wire-protocol change requiring SilentDragonXLite interop review.
- Bootstrap lacks an offline-rooted signature (S2-2 residual) — needs signing infra.
- Console scrollback retains console-typed key-export output in plaintext (N1-1
residual) — inherent to an echoing console; would need output redaction.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Six behavior-preserving consolidations from the audit:
- RPCClient::call() overloads share a private performCall() (payload dump +
curl_easy_perform + http code) and a static parseRpcResult() (error->RpcError
extraction). The timeout overload restores the prior timeout in both the
success and catch paths, exactly as before.
- The six UnifiedCallback methods delegate to one splitUnified() that builds
the (Callback, ErrorCallback) pair once (null-check preserved).
- One liteTrimCopy() in lite_connection_service replaces 5 file-local
trim-copy helpers across the lite slice.
- lite_wallet_controller's inline height JSON parse now routes through the
tested parseLiteHeightResponse().
- theme_effects.cpp: unpackRGB()/scaledAlpha() replace 14 RGB-unpack + 5
alpha-scale copy-paste blocks.
- settings.cpp load() uses loadScalar()/loadClamped() helpers for ~44 scalar
fields. Besides removing boilerplate this HARDENS loading: ~44 fields that
previously only checked contains() now also verify the JSON type, so a
malformed value in settings.json falls back to the default instead of
throwing/misreading. Custom cases (enum parses, legacy migrations, arrays)
stay inline; save() is unchanged.
Full-node + Lite build clean; ctest 1/1; hygiene clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The lite status bar showed "blocks: 0" once fully synced. The backend's
`syncstatus` only includes synced_blocks/total_blocks WHILE actively scanning;
at rest it returns just {"syncing":"false"}, so the parsed syncedBlocks was 0
and became state.sync.blocks. On the synced refresh path, additionally query the
backend `height` command (wallet last-scanned height, a fast local read) and use
it as the synced height/tip, so the block count is correct at rest.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lite send/shield, unlock, and key-import failures were shown only as transient
toasts — impossible to copy. Route them through liteLog() so they also appear in
the lite Console (which has a Copy button), alongside the lifecycle/open/sync
errors the controller already logs:
- send/shield broadcast failures (App broadcast-result delivery)
- wallet unlock failure
- key import failure (controller; logs the error text only, never the key)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a maintenance option for the lite wallet to re-download and re-scan every
block from the lite server — useful when balances or history look wrong.
- LiteWalletController::startRescan() runs the backend `rescan` command (which
clears the wallet's synced block cache and re-syncs from its birthday) on a
detached thread, reusing the existing sync progress/refresh machinery: it
resets syncDone_ so refreshModel() shows progress again and refreshes data on
completion. No-op if no wallet is open or a scan is already running.
- scanInProgress() exposes the initial-sync-or-rescan state.
- Settings (lite, open wallet) gains a "Redownload blocks" button behind a
confirmation modal, disabled while a scan is running. i18n strings added.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The lite backend's litelib_execute() is the same command interface as
silentdragonxlite-cli (balance, info, height, list, notes, addresses, sync,
syncstatus, new, send, shield, encrypt, …), so the lite Console can be a real
interactive console — like the full-node RPC console — instead of a read-only
diagnostics log.
Controller: add an async arbitrary-command runner mirroring the broadcast
pattern — runConsoleCommand() splits "<command> [args]" (the first token is the
command, the remainder is passed as the single arg string litelib_execute
expects, since it does NOT whitespace-split), runs the bridge call on a detached
thread that captures the shared bridge (never `this`), and delivers the result
to a main-thread slot drained by takeConsoleResult(). Results are NEVER routed
through LiteDiagnostics (seed/export can return secrets).
Console tab: a command input (Enter to run, Up/Down history via the shared
console_input_model helpers) over a unified scroll buffer that interleaves the
automatic diagnostics events with user command I/O, colour-coded, with the live
status header preserved. The input is disabled while a command runs.
Two backend footguns are intercepted at the UI layer before forwarding:
`clear` (the backend command WIPES wallet tx history — re-bound to clearing the
view, what the user expects) and `quit`/`exit` (would only save; the embedded
backend must stay running with the app).
Test: runConsoleCommand drives the fake backend (info -> raw response; "new zs"
-> exercises the command/arg split; blank line rejected).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Settings page drove the controller's synchronous createWallet/openWallet/
restoreWallet, which blocks the UI thread on the (often flaky) lightwalletd and
gives up after the first server. Add a generic async lifecycle path that mirrors
the async-open failover but carries the full request (passphrase, restore seed/
birthday/account/overwrite):
- beginCreateWalletAsync / beginOpenWalletAsync / beginRestoreWalletAsync run
on a detached thread that builds its OWN local LiteWalletLifecycleService
from captured value copies + the shared bridge (never `this`, so it can
safely outlive the controller). Each request type's serverUrl override field
feeds the failover: try the preferred server, then every other usable
default; stop on the first ready wallet or a structural block; keep the
preferred server's error on total failure. The request's secrets are wiped
once the attempt finishes.
- pumpLifecycleResult() finalizes on the main thread (flip walletOpen, persist,
start sync) and caches the result for the UI; wired into App::update next to
pumpAsyncOpen(). beginAsyncLifecycle() now also yields to an in-flight
lifecycle request so the auto-open loop can't race it on the same bridge.
- settings_page kicks off the async op, disables the button while in flight,
and polls the cached result each frame for the status/summary.
Tests: testLiteWalletControllerAsyncLifecycleFailover covers async create (with
passphrase) and restore failing over preferred->fallback, plus all-servers-down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror the async-open path for wallet creation. beginOpenExisting() and
beginCreateWallet() now both delegate to beginAsyncLifecycle(bool create),
which runs the backend init on a detached thread and walks the failover
server list (preferred server first, then all usable defaults), reporting
the preferred server's error on total failure. The first-run wizard's
Create button drives this through a non-blocking "creating" poll state so
the UI no longer freezes while the backend contacts a (possibly flaky)
lightwalletd. The created seed response is securely wiped immediately and
read back via exportSeed for the reveal/verify steps.
Safe because litelib_initialize_new contacts the server before writing any
wallet file and LightClient::new errors if a wallet already exists, so a
failed candidate leaves no partial state.
Tests: fake backend's initialize_new now honors the dead/warmup server
substrings; testLiteWalletControllerOpenFailover gains a create-failover
case (preferred dead, fallback good -> walletOpen).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The failover overwrote outcome.error on every attempt, so a total open failure
reported whichever (often broken) fallback was tried last — e.g. lite5's
"CertNotValidForName" — instead of what the user's preferred server actually did.
Keep the first (preferred) server's error as the summary so "Open failed: …" names
the actionable reason; the per-server attempts are still in the Console log, and
the warmup flag is still set if any server was warming up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When the preferred lightwalletd server is reachable but warming up (JSON-RPC -28
/ "Activating best chain"), the failover treated it like a dead server and fell
through to the others, so the wallet didn't open until the next 20s retry — even
though the healthy server was ready within seconds.
Detect the warmup error during failover, flag it on the open outcome
(lastOpenWasWarmup()), and have the App retry on a short ~4s interval in that case
instead of 20s, so the wallet opens promptly once warmup clears. A unit test
covers a warming-preferred + dead-fallback open setting the flag.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The lite variant had no visibility into why a wallet failed to open — just a
"disconnected" spinner. Add a lite-only Console tab (full-node keeps its RPC
console) that shows a live diagnostic log.
- LiteDiagnostics: a small thread-safe, bounded ring buffer (header-only). The
controller writes to it from its background threads: each failover server
attempt and result, wallet open/create/restore outcomes, sync start, and
blocked-open reasons. The App logs controller (re)builds with the preferred
server.
- lite_console_tab: a terminal-styled, read-only view of the log (newest at the
bottom, error/success lines coloured) with Clear / Copy / Auto-scroll. Reachable
even when the wallet is locked (it's diagnostics, no secrets). Registered as
NavPage::LiteConsole, gated lite-only via WalletUiSurface::LiteConsole.
A unit test drives an open-with-failover and asserts the log records the
connection attempt and the successful open. Built clean for full-node, lite, and
Windows cross-compile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Opening an existing lite wallet ran synchronously on the UI thread and used a
single server, so a dead/unreachable lightwalletd server froze startup for the
connect timeout and then stranded the wallet ("disconnected" spinner) — and the
DragonX lite servers are flaky (often several down at once).
Add LiteWalletController::beginOpenExisting() / pumpAsyncOpen(): the open runs on
a background thread (mirroring the sync/broadcast shared-lifetime pattern — it
captures only shared_ptrs + value copies, never `this`), trying the preferred
server first and then every other usable default until one succeeds. The main
thread finalizes the result (flips walletOpen, starts sync) or records the reason.
The rollout gate is still checked up-front on the main thread.
App: auto-open now calls beginOpenExisting() and pumps it each tick, retrying on
a 20s interval so a transient outage self-heals once a server returns; a failed
open surfaces its reason (notification + Network tab) instead of a silent spinner.
Tested: a fake bridge that fails specific servers exercises both
preferred-dead -> fallback-opens and all-dead -> fails-with-reason. Built clean
for full-node, lite, and Windows cross-compile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- importKey routed transparent vs. shielded purely by the first character, which
can mis-route (e.g. testnet/regtest WIFs). On failure, try the other import
command before reporting an error (each validates the encoding, so a wrong
command rejects rather than mis-imports). The key copy is wiped after both tries.
- Clamp the shield dialog's fee input to [0, 1] DRGX, mirroring the UTXO-limit
clamp, so a negative or fat-fingered huge fee can't be submitted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- A Send record carries its recipient in outgoing_metadata, not the top-level
address/memo, so sent txs showed a blank destination + memo. Surface the first
recipient (single-recipient case) into the transaction list.
- A tolerated partial refresh where the notes/utxo command failed (addresses
present, spendable outputs absent) zeroed every per-address balance, which looks
like fund loss. Preserve the last-known per-address balances in that case.
- Retry the post-send/shield save once on transient failure instead of ignoring
the result (the backend does not auto-save after send/shield).
- An unparseable broadcast response now uses cautious wording ("status could not
be confirmed — check Transactions before retrying") rather than implying a hard
failure, avoiding a blind double-spend retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a fail-open, local-only gate that decides whether the lite wallet may run,
so a post-release issue can disable it and rollout can be staged — without any
phone-home (privacy posture: no runtime network fetch; the per-install rollout
bucket is a hashed, never-transmitted local id).
- wallet/lite_rollout_policy.{h,cpp}: a pure decision core. Order — emergency env
kill-switch (absolute) -> local override -> manifest gates (global enable /
version floor-ceiling / blocklist / staged-rollout permille) -> fail-open allow.
Plus a JSON manifest loader (missing/invalid -> fail-open) and FNV-1a bucketing.
- Threads the decision through LiteWalletController -> LiteWalletLifecycleService:
new availability() reason RolloutDisabled blocks create/open/restore and surfaces
the gate's user-facing message via the lifecycle status.
- App::rebuildLiteWallet() resolves it from: DRAGONX_LITE_KILL_SWITCH (env), the
lite_rollout setting (auto/force_on/force_off), and a locally-cached manifest at
<config-dir>/lite_rollout.json. install id generated once via libsodium.
- Settings: persist lite_rollout override + the install id.
A signed remote fetcher can populate the manifest cache later without touching the
policy. Unit-tested (version compare, bucketing, override/env precedence, manifest
gates, staged rollout, loader fail-open, controller integration) and runtime-verified
on Linux (env kill-switch, manifest disable, control sync). Both variants build;
full suite passes; hygiene clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Wire the backend passphrase-encryption commands into LiteWalletController:
- encryptWallet / decryptWallet (take passphrase by value, securely wipe it,
save after), unlockWallet / lockWallet (bring spending keys into/out of
memory), and encryptionStatus() -> {encrypted, locked}. All return
failure-safe results; errors arrive as {"error":..} or "Error:" (handled).
- Fold encryptionstatus into refreshModel() (polled every cycle, available even
mid-sync since it reads local wallet state) and apply it in
applyLiteRefreshModelToWalletState, so WalletState.isEncrypted()/isLocked()
track the backend — which gates the existing locked/auto-lock UI.
Backend contracts verified against the SDXL source: encrypt/unlock/decrypt take
the passphrase as the single arg; lock takes none; encryptionstatus returns
{"encrypted","locked"}; ops return {"result":"success"} / {"error":..}.
Tests: testLiteWalletControllerEncryption drives encrypt -> lock -> unlock ->
decrypt via encryptionStatus(), checks empty-passphrase + closed-wallet rejection,
and that the status folds into WalletState. Fake models the state machine.
GUI wiring (encrypt in Settings, unlock prompt / lock action) is the follow-up;
the backend create flow remains unencrypted by default until encrypt is run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Auto-open: on the first update() tick (kept off init() so a slow
initialize_existing network call can't freeze startup before the window), if a
wallet file exists, open it. initialize_existing needs no passphrase — it loads
the file; a previously-synced + saved wallet resumes from its height (fast)
instead of rescanning from the checkpoint. Adds LiteWalletController::walletExists()
(bridge.walletExists on the connection's chain) + a chainName_ member.
RPC-refresh gating: the earlier connected=walletOpen() fix (so the wallet UI is
enabled in lite) had a side effect — the full-node periodic + per-page RPC
refreshes (mining/balance/peers/txs, and setCurrentPage's immediate refresh)
gate on state_.connected, so they began firing in lite and failing
("X error: Not connected"). Re-gate those on ACTUAL RPC connectivity
(rpc_ && rpc_->isConnected()) instead of the lite proxy. Full-node is unchanged
(state_.connected ⟺ rpc connected there); lite no longer issues any RPC.
Runtime-verified in WSLg with a pre-seeded wallet: app auto-opens (Starting
Mempool + sync begins), and "Not connected" / getMiningInfo / RPC-connect noise
all drop to 0 — a fully clean lite run. tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified against the SDXL Rust source that the backend auto-saves only on
new-address / import / rescan; it does NOT save after sync, send, or shield, and
litelib_shutdown merely sets a flag. So without intervention a first sync
(~30 min) and any sent transaction are lost on restart.
The controller now triggers the backend `save` at exactly the right points:
- after the detached `sync` completes — and BEFORE syncDone_ is set, so a
syncComplete() observer always sees a fully persisted wallet;
- after a successful send / shield (the doSend/doShield cores; skipped on
failure so a failed broadcast doesn't write);
- a guarded best-effort flush in the destructor, only when syncDone_ and no
broadcast is in flight, so shutdown never blocks on the wallet lock held by an
uninterruptible scan or in-progress proving;
- plus a public saveWallet() for explicit/periodic saves.
Wallet-file crash recovery (.dat / .dat.bak rotation) is already handled inside
the backend.
Tests: testLiteWalletControllerM5Persistence proves saves fire after
sync/send/shield and explicit saveWallet(), and do NOT fire on a failed send or
with no wallet open (fake gains a save counter). Plan doc updated; M5b
(packaging/CI/signing/rollout) remains.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add the spend & backup surface to LiteWalletController, with the real SDXL
backend contracts verified against the Rust source:
- send / shield: ASYNC (detached broadcast thread + takeBroadcastResult() slot,
mirroring the sync thread's shared-lifetime pattern, since sapling proving can
take seconds), plus synchronous *Blocking cores for tests. send uses the
JSON-array form ([{address,amount,memo}]) because litelib_execute passes the
whole args string as ONE argument (no whitespace split) — the space-separated
CLI form would never parse. send/shield report failure via {"error":..} in the
body (NOT an "Error:" prefix), so the result is derived from the parsed JSON.
- importKey: auto-detects transparent WIF (U/5/K/L -> timport) vs shielded key
(-> import); takes the key by value and securely wipes it before returning.
- exportPrivateKeys / exportSeed: synchronous local reads returning SECRET
material (flagged: no logging; caller wipes after the user saves the backup).
- broadcast thread is detached in the dtor (captures shared bridge + flag + slot,
never `this`), so it is safe to outlive the controller.
Tests: testLiteWalletControllerM4 drives send (success / no-recipients /
{"error":..} / async-slot delivery / pre-open rejection), shield, export, seed,
and import (shielded + WIF + pre-open). Fake backend returns the real command
shapes + a g_liteFakeSendFails error toggle.
GUI wiring (send_tab button, backup/import UI) is deferred like the M3 UI hop
(GUI-unverifiable here). Plan doc updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Re-audited this session's lite-wallet changes (originally written at medium
effort) and fixed the genuine issues found:
- walletReady (open path): litelib_initialize_existing returns the bare string
"OK", which is NOT valid JSON, so the previous `json::accept(value)` check
marked a *successful* open as not-ready. Key off a non-empty success response
instead (the bridge already maps "Error:"/null to failure). Drops the now
unused nlohmann include.
- sync progress: while the detached sync thread is still running, syncDone_ is
authoritative — don't surface the backend's transient idle syncstatus
({"syncing":"false"} -> parser progress=1.0/complete=true) as a misleading
100%/done. Force complete=false and zero the bogus 1.0 in the progress model.
- per-address balance: also exclude `pending` outputs (notes/utxos from an
unconfirmed received tx) so per-address figures match confirmed/available.
- secret wiping: the settings page left the page-local request copies
(input.request.*Request.{passphrase,seedPhrase}) unwiped, and the
validation-only fallback path wiped nothing. Replace the single-path memzero
with an RAII scrubber that wipes both the UI char buffers and the request
string copies on every return path.
- concurrency: document that concurrent bridge->execute() is intentionally
unguarded — litelib serializes wallet access internally via
Arc<RwLock<LightWallet>>, so a C++ mutex is unnecessary and would defeat the
sync/syncstatus concurrency the design relies on. syncLaunched_ -> atomic.
Tests: fake backend now returns the real init shapes (seed object for
create/restore, bare "OK" for open) and a new open-path case guards the
walletReady regression. Removed an unreliable alloc==freed leak assert from the
thread-bearing controller test (kept in the thread-free bridge test). Also fixed
a stray CMake indent and removed ~220MB of untracked build/debug scratch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- LiteWalletController::newAddress(shielded) runs the backend "new" command ("zs"/"R" ->
do_new_address), parses the ["addr"] response, and returns the new address; the next
refresh lists it. Fast (local derivation), safe on the UI thread.
- fake_lite_backend returns ["zs1fakenew"]/["R1fakenew"] for "new" by args.
- testLiteWalletControllerNewAddress covers shielded/transparent + no-wallet error.
Also confirmed (no code needed): the sync-progress indicator already works for lite —
balance_tab reads state.sync.* which M2b-3 populates. Per-address balances landed in M2.
Remaining M3 is pure UI wiring (receive_tab button -> newAddress, loading/empty states),
which isn't verifiable without a GUI session.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
applyLiteRefreshModelToWalletState now derives each address's balance by summing its unspent
notes/utxos (excluding spent and unconfirmed-spent outputs) instead of the aggregate-only
zeros, so the Receive/Balance UI shows per-address amounts. The notes parser shape is
confirmed against do_list_notes in the backend source.
testLitePerAddressBalances covers the summing + spent-exclusion. Completes M2.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The backend `sync` command is a blocking, uninterruptible full chain scan (do_sync(true);
does not honor the shutdown flag), and balance/list block until synced. Previously
startSync() ran on the main thread (would freeze wallet creation) and the worker could
block, making the destructor join() hang at shutdown.
Redesign:
- bridge is now std::shared_ptr<LiteClientBridge>, shared with a detached sync thread so
detaching is safe and litelib_shutdown isn't called while a running sync still holds the
bridge; the controller's own ref prevents premature shutdown during normal operation.
- startSync() launches the blocking `sync` on a detached thread (non-blocking; never joined).
- refreshModel() gates on syncDone_: while syncing it publishes syncstatus progress only;
once synced it does the full balance/addresses/list refresh (now fast).
- destructor joins only the fast poll worker and detaches the sync thread -> no hang.
- syncComplete() accessor added.
Tests (deterministic, via a blocking-sync fake; counters made atomic for the detached
thread): testLiteWalletControllerShutdownDoesNotHangDuringSync (destructor returns <1.5s
with sync blocked); refresh/worker tests wait for syncComplete()/a balance-bearing model.
Stable across repeated runs; lite+backend and full-node apps build clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- LiteWalletController owns a background std::thread worker that, once a wallet is ready,
refreshes every ~4s and publishes a copyable LiteWalletAppRefreshModel under a mutex.
Worker auto-starts on lifecycle-ready and is stopped+joined in the destructor. status_
is written only on the main thread; walletOpen_/syncStarted_ are atomic.
- App::update() calls takeRefreshedModel() and applies it into state_ on the main thread
(WalletState is non-copyable, so the model crosses the thread boundary, not the state),
so the existing Balance/Receive/Transactions tabs populate from lite data.
- refreshWalletState() refactored onto refreshModel() (pure, worker-safe).
- testLiteWalletControllerWorkerProducesModel verifies the worker publishes a populated
model (stable across repeated runs). Builds clean in all configs.
Real-backend smoke (lite_smoke --refresh now runs real output through the parsers) found
two integration bugs, documented in the plan for follow-up:
- syncstatus parser requires synced_blocks/total_blocks but the real idle response is
{"syncing":"false"} (string), so it fails to parse when not actively syncing.
- the first data query (balance/list) blocks on a full chain sync, which would hang the
worker's shutdown join — needs a cancel/timeout path.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Shared-bridge refactor (litelib is a global singleton; every LiteClientBridge calls
litelib_shutdown() on destruction, so services must not each own one):
- LiteWalletLifecycleService, LiteWalletGateway, LiteSyncService now take a non-owning
LiteClientBridge*; LiteWalletController owns the single bridge and passes &bridge_.
Sync + controller refresh:
- LiteSyncService::startSync executes the real "sync" command (was a stub).
- LiteWalletController: startSync() (auto-fires when a wallet becomes ready) and
refreshWalletState(WalletState&) — polls syncstatus, runs gateway.refresh(), maps the
bundle, applies balances/addresses/transactions/sync into WalletState.
Tests:
- fake_lite_backend.h returns command-shaped JSON (per tests/fixtures/lite/result_parsers.json).
- testLiteWalletControllerRefreshPopulatesState drives the full path against the fake.
- Surfaced + worked around a real integration issue: parseLiteInfoResponse requires
latest_block_height and the gateway aborts the whole refresh on the first command's
parse failure (fragile vs partial backend responses; hardening tracked for M2b-3).
Verified: ctest green; lite+backend, full-node, lite-no-backend apps + lite_smoke build clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
