The Market tab calls the exchange-list, price-history and candle
fetches every frame, so a failed fetch (offline, rate-limited, a
venue's API down) was retried on the very next frame, ~20 requests a
second.
- util::FetchBackoff: 30 s doubling to a 10 min cap, +/-20% jitter.
The exchange list, the price history (a partial result counts as a
failure) and the per-pair candles each back off on failure.
- Candle backoff is per pair. Switching to another pair still loads at
once, a failed refresh keeps the on-screen pair's last candles, and
switching back to a pair that is backing off shows the aggregate
chart rather than the previous pair's candles.
- The Market tab's refresh button retries at once (at most every 5 s).
A price fetch (60 s timer, no backoff) that succeeds after failing
means the network is back, so it lifts all three backoffs.
- A partial price history no longer marks the chart loaded: with no
fetch timestamp, the 30-minute reload gate measured system uptime
and blocked retries for the first 30 minutes after boot.
- The exchange list goes through httpGetString (TLS verified, size
capped) with short timeouts (5 s connect, 12 s total, as it runs on
the shared RPC worker) instead of its own curl code. A failed fetch
is retried; it used to be tried only once per session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Explorer: the tip check runs every frame the Explorer tab is open,
and it read both tip rows and rewrote them each time (two autocommit
WAL writes per frame). A steady tip is now kept in memory and skips
SQLite. A new tip writes both rows in one savepoint, so a crash
between them can't pair a new height with the old hash. A test
checks that 100 steady checks write nothing.
- Console: while the daemon was in the Error state the Console tab
added its error line on every poll, i.e. every frame, re-laying out
the whole buffer each time. It prints once per error now: on entering
Error, when the message changes, or after another crash
(EmbeddedDaemon::getUnexpectedExitCount(), never reset). setState
writes the message before the state, so a reader that sees Error sees
that error's message. The stray " ===" suffix is gone.
- perf.log: the profiler appended a block every 300 frames on every
run and never rotated the file (tens of MB a day for a wallet left
open). It is now off unless the app starts with DRAGONX_PERFLOG=1;
otherwise its zone hooks are near no-ops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Restoring or un-maximizing the window called refreshNow(), which wipes
the history-scan progress and re-scans every z-address (a
z_listreceivedbyaddress per address, each holding cs_main). The Peers
tab's refresh button did the same, and holding F5 auto-repeated it.
- Window restore no longer forces a refresh; the regular timers catch
up (skipping the daemon-output backlog stays).
- The Peers refresh button refreshes peers only.
- F5 ignores key repeat. An explicit F5 or History refresh still does
the full re-scan.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A send stays tracked until z_viewtransaction shows an outgoing output.
Shields, merges/consolidations and chat note splits pay only the wallet
itself, so they never showed one. They stayed tracked for the whole
session and forced a full history refresh past the scan throttle on
every tab.
- A tracked send whose view has no outgoing output is retired once it
is mined (1+ confirmations) or conflicted.
- Tracked sends are enriched first, and reaching the per-cycle view cap
no longer ends the loop, so the cap can't starve them.
- Backstop: a tracked send still unsettled 20 blocks after it was added
(expired, dropped from the mempool) stops being tracked.
- Tracked sends are cleared on disconnect: they belong to that
connection's wallet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Connected-but-locked fell through to tryConnect() on every Core tick
while the lock screen sat idle: new sockets, getinfo and getwalletinfo,
a forced address scan, a CoinGecko fetch and a wallet-index rewrite.
Its wallet scans also held cs_main ahead of the user's
walletpassphrase.
- While locked, poll chain state only (refreshCoreData without the
balance). That keeps the sync height current and the 3-strike
lost-connection check armed, so a node that exits while locked is
still restarted. Pool mining keeps the lock screen down, so while it
runs the throttled balance, the peers and the lock state (for an
unlock done in the Console tab) keep refreshing too.
- Warmup polls count refused/reset connections toward the
lost-connection check, so a node that died during warmup is
restarted instead of leaving the loading or lock screen over it.
- The wallet salvage/degraded detectors run at connect and again when
warmup ends: for encrypted wallets they relied on the repeated
tryConnect.
- restartDaemonAfterEncryption records the wallet as encrypted and
locked itself (the wizard's deferred path never did), and marks the
main client disconnected so the reconnect path picks up the restarted
node, aborting any in-flight call first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While theme effects were on (the default) the main loop drew every
frame it could. Where vsync is off (offscreen, some drivers, remote
sessions) an idle wallet spun at ~3,000 fps, 88% of a core; with vsync
it still drew every refresh. Frames are now paced by what needs them:
- full rate while there is input, a held key, a window appearing or
settling, a smooth scroll or the UI sweep;
- ambient (30 fps focused, 10 fps unfocused) for theme effects, the
acrylic backdrop, avatar animations and notifications;
- progress (10 fps focused, 4 fps unfocused) for UI that changes
without input. The updater and bootstrap downloads, console
commands, lite-wallet operations, seed migration, the loading
overlay and the lock-screen countdowns ask for it with
material::RequestProgressFrame();
- otherwise idle, as before: wait for events, with a housekeeping wake
every 2 s (5 s unfocused).
A software frame cap (0.9x the display refresh) bounds the loop where
vsync is off, and hidden, occluded or minimized windows get no ambient
frames. Reduce Motion freezes the theme-effect clock
(ThemeEffects::setMotionFrozen), so it needs no ambient frames either.
The displayed-balance roll goes through one clamped StepDisplayLerp
(balance_lerp.h). An idle-length frame pushed dt*speed past 1, so the
roll overshot, and under Reduce Motion's speed of 999 it diverged to
inf/NaN. The classic layout had its own copy of the old code.
Idle CPU, Lite build, offscreen (no vsync): 88% -> 5% of a core with
effects on, and 91% -> 3% with effects saved off (with the previous
commit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Low-spec mode, theme effects, blur, UI and noise opacity and the
console scanline reached the live effects state only once the Settings
page or the first-run wizard was opened. "Effects off" and low-spec
therefore reverted at every launch, and the animated defaults kept the
main loop busy (91% of a core on an idle Lite wallet whose effects were
saved off).
- App::applyVisualSettings(): one low-spec-aware path from the saved
prefs to the effects state, used at startup (after the skin, since
setActiveSkin reloads the effect config), by the low-spec hotkey, the
wizard and the Settings page.
- Low-spec stays a runtime-only override. The Settings page shows the
overrides but persists the real prefs from its snapshot, and opening
it under low-spec no longer turns theme effects and blur back on.
Unticking a low-spec in the wizard that was loaded rather than ticked
there now restores the saved prefs.
- Theme effects on/off always pairs with reduced transparency (the
rainbow, shimmer and glare layers), as at startup and in the hotkeys.
- kAcrylicMaxBlur moves to imgui_acrylic.h, so startup clamps blur
values saved in the old 0-4 range the way the slider does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logic timers advanced by io.DeltaTime, which update() clamps to 0.25 s
so animations don't jump after a pause. That matched real time only
while the main loop rendered continuously: with frames seconds apart, a
timer fed the clamped delta runs up to 8x slow. Affected: the refresh
scheduler, the seed-migration poll, the chat fast scan, the encryption
check, the loading and shutdown timers, the lock-screen countdowns, the
Settings debug gate and the mining benchmark.
- App::logicDeltaTime(): steady-clock seconds since the previous
update(), capped at 6 s so a sleep/resume fires each timer once
instead of replaying the gap. Visual interpolation keeps the clamped
io.DeltaTime.
- The refresh timers tick before the RPC results are drained, so a
hold that a callback arms (the connect-retry backoff) starts fresh
instead of being charged the gap before it existed.
- The shutdown timer is measured from shutdown_start_time_:
beginShutdown runs from SDL event handling, so an accumulated delta
would count the idle gap before the close request.
- The lock-screen error and lockout countdowns subtract only the time
since they were armed: a failed unlock arms them from an RPC result,
which can land on the frame that ends an idle gap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Users who keep funds apart under different labelled addresses can now
shed notes (smaller wallet, faster scans/witness rebuilds) without the
funds being merged into a single address.
- Merge/Consolidate dialog: "Where should the funds go?" - Into one
address (unchanged) or Keep in each address. The latter lists shielded
addresses with 2+ spendable notes (label, note count, amount;
too-small ones disabled) and merges each address's notes back into
that address with z_mergetoaddress [addr] addr. Addresses with more
notes than the batch size get several batches (the daemon locks a
batch's notes before returning, so calls take disjoint notes); the
dialog suggests a second run after those confirm. Per-address
progress; ops keep running if the dialog is closed. The Consolidate
(wallet-size) preset opens in this mode; Merge keeps "Into one".
Shielded only: a transparent address can't take a merge's output.
- services/note_consolidation: groupSpendableNotes, worthConsolidating,
estimateBatches, consolidateInPlace (pure; driven by a merge-call
function), with unit tests against a stand-in following dragonxd's
rules.
- fake_dragonxd: optional note wallet (FAKE_WALLET_NOTES,
FAKE_MERGE_SECS) with z_mergetoaddress and its operations.
- i18n: 17 new keys in all 8 languages; CJK subset rebuilt.
- UI sweep: modal-consolidate target.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follow-up to 5246898. A transparent address only ever receives mining
rewards on DragonX (private chain), so:
- One explainer ("Receives solo-mining rewards only - the network rejects
payments to it. Rewards are shielded automatically once they mature.")
on the Overview row hover, the Receive picker hover, the Receive card
and the Validate Address result (now typed "Mining address
(transparent)").
- Receive: a selected mining address shows the explainer and a "Use a
shielded address" button (creates one if none exists) instead of the
payment request, and a "Not for payments" panel instead of a QR code.
The default selection prefers a shielded address; the "All" filter
hides empty mining addresses unless solo mining or marked as a mining
address; the filter reads All / Shielded / Mining.
- Request Payment: no transparent section, never prefilled with one.
- Overview: no "Mining - Mining" tag on a marked transparent row.
- FAQ: address answers rewritten; the send and memo answers no longer
imply you can pay a transparent address. All 8 languages.
i18n: 4 new keys, 6 FAQ answers updated in place, 2 dead keys removed,
CJK subset rebuilt. UI sweep: receive-mining-address and
modal-validate-mining targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DragonX is a private chain (-ac_private=1): consensus rejects any
non-coinbase output to a transparent address, so a t-address can only
ever receive mining rewards, and its coins can only move to a shielded
address. The wallet treated them like ordinary recipients.
Block paying one:
- Send: a transparent recipient shows "Mining address - can't be paid"
and disables Review Send (tooltip explains; ask for a zs... address).
Typing, paste, contacts and payment URIs all go through this field.
- Overview drag-to-transfer: a mining-address row is never a transfer
target (it only reorders).
- Pool payout must be shielded (pools pay with ordinary transactions):
field tooltip, disabled Start button and the start check say why.
- isValidRecipientAddress() is now shielded-only; new isDragonXAddress()
and classifyRecipient() (Shielded / MiningOnly / Invalid).
Call them mining addresses:
- Overview: "Mining rewards" card (amber "Not yet shielded" when there
is a balance; hover explains; click opens the Shield dialog), "New
mining address" button with a tooltip, rows typed "Mining".
- QR / label dialogs, portfolio filter, contact badge ("Mining only"),
Receive notifications.
i18n: 17 new keys in all 8 languages, 12 dead keys removed, CJK subset
rebuilt. Tests: recipient classification, translation completeness.
UI sweep: new "send-mining-recipient" target.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
S12 - our node across sessions:
- The node the wallet launches is recorded in <datadir>/obsidiandragon-
dragonxd.pid (pid + process start time + exe). A later session that
finds it still running (after "Leave running" / keep_daemon_running)
stops it gracefully on quit and waits for that exact process (no time
limit, "Leave running" offered); never signals or kills it. A reused
pid or a reboot never matches; stale records are deleted.
- stop_external_daemon is now honoured when this session only connected
(no controller); it was ignored.
S13 - the node's own log on every platform:
- No -printtoconsole on Linux/macOS: the node writes its timestamped
debug.log (which outlives the GUI) and we tail it next to the stderr
pipe. Tail path from the datadir or the isolated override (Windows had
%APPDATA% hard-coded, wrong for migrate-to-seed starts).
- After the node shrinks debug.log at startup, resume at this run's
banner instead of re-reading the old run's tail.
- A node we didn't launch (left running, or found running) feeds the
busy tracker from its debug.log, tied to the live process (our record,
or POSIX hushd.pid) and only from lines it wrote. A GUI attaching to a
node mid-rebuild now says "Node busy: rebuilding note witnesses" and
asks before stopping it.
- A start that only finds a running node no longer resets the tracker;
a found busy node shows the busy overlay at once.
S14: launch our node with -rpcthreads=16 unless DRAGONX.conf sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every operation that stops the node (restart, rescan, repair, delete
chain data, reinstall, bootstrap, wallet switch/adopt/restore/rebuild,
wizard restart, encrypt, decrypt) now:
- refuses up front while the node is rebuilding witnesses or has not
answered for 30s, with a "try again when it's done" warning, and sends
no stop;
- goes ahead only once the node's PROCESS has exited, not its RPC port.
A stop that doesn't finish within 120s cancels the operation (warning;
a cancelled rescan/repair disarms its flags); nothing is started over
the old node, chain data isn't deleted, wallet.dat isn't swapped.
Specifics:
- stopDaemonForWalletSwitch() no longer reports "stopped" when the app
is quitting (adopt could swap wallet.dat under a live node).
- Decrypt waited a fixed 3s after "stop" before renaming wallet.dat; it
now waits for the process to exit, and scrubs the key export if not.
- Bootstrap waits for the process before cleanChainData and stops the
node through the stop routine instead of the shared RPC client.
- StopScope::Connected lets switch/reinstall/decrypt stop an adopted or
external node through the same never-kill routine.
- A bounded stop that can't reach the node (a foreign node refusing our
credentials) gives up after 5s instead of 120s.
- macOS: isDaemonProcessRunning() checks processes (libproc), not the
RPC port.
- rpcBusyWhileAlive() also reads the busy gate: since the gate, the
first timeout usually lands on another lane and the 30s clock never
started (also weakened the quit prompt for a silent rebuild).
- Notifications render during the first-run wizard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A node rebuilding note witnesses for an hour was shown as "Starting
DragonX node... Launching dragonxd", which invited closing it.
- Overlay, a new NodeBusy banner and the status bar now say what the node
is doing (rebuilding witnesses / catching up on blocks / up but not
answering), with the elapsed time and Phase-1 block progress. A rebuild
during startup warm-up replaces the stale "-28 Activating best chain"
text, and the overlay re-applies its text once a second instead of only
on a connect attempt (30s apart while the node is busy).
- Quit prompt: elapsed time, "Keep node running & quit" is the default,
"Stop anyway & quit" becomes "Stop node & wait" (it no longer kills).
- A reinstall skipped because the node is still running now notifies.
- Status bar: don't repeat the warm-up status on the right, and don't
print "Connected" there in non-English locales.
- i18n: 31 new keys in all 8 languages; 10 dead force-quit/old-modal keys
removed; CJK subset rebuilt for the new glyphs.
- Tests: chooseDaemonStatus, NodeBusy banner priority, and every new key
present in all 8 JSONs with matching printf conversions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dragonxd serves RPC with 8 workers and a 16-deep queue. While a witness
rebuild holds cs_main, every request needing it waits, and a request the
client gave up on keeps its slot. The GUI kept polling and re-probing
until all 24 slots were its own abandoned requests (even stop was then
refused), treated the busy node as lost (tearing down the wallet state),
and retried connect at frame rate on some pages.
Busy gate (src/rpc/rpc_busy_gate.h), enforced in RPCClient::performCall
for the shared rpc_ / fast_rpc_:
- the first reply timeout or queue-full refusal marks the node busy;
from then on nothing needing cs_main is sent (calls fail at once with
the new RpcFailureKind::Deferred). stop, help and getrescaninfo are
lock-free in dragonxd and always go through
- one canary getinfo with no client timeout waits on its own client and
thread; its answer clears the gate and triggers an immediate refresh
(queue-full: retried after 2..30 s; no answer: back to normal handling)
- the timer dispatch skips Core/Tx/Addresses/Peers/chat/mining/opid and
connect attempts while busy
- the 3-strike teardown counts only failures that put the connection in
doubt, never busy ones; no balance scans follow a busy chain-info call
Reconnect storm: retries were armed with setTimer(Core, kCoreDefault - 1),
i.e. "4 s elapsed", which against Overview's 2 s interval meant every
frame. RefreshScheduler::deferFor() is an absolute hold, and
ConnectRetryBackoff picks the delay by failure kind (not listening
1/2/5 s, queue full 2..30 s, busy 30 s, else 4 s).
Measured against the fake daemon: abandoned requests during a rebuild
went from ~24 (every slot) to at most 2, with no teardown and recovery
when the rebuild ends; a saturated queue sees about one canary per
back-off step instead of ~190 requests/s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The one-time "back up your seed phrase" nudge only stopped probing on a
success or the exact "not derived from a mnemonic" error. Any other
answer re-armed it for the next frame, so a daemon without the RPC
("Method not found", e.g. the older bundled binary) was sent
z_exportmnemonic at frame rate: ~2,300 requests/s against a test node.
Chat identity setup re-posted its fetch on the next frame after a
transient failure in the same way.
An inconclusive nudge probe now waits 5 minutes before the next; a
transient identity-fetch failure waits 10 seconds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Quitting during a witness rebuild is supposed to ask before stopping the
node, because a stop throws the rebuild away and a killed node replays
and redoes it. The guard almost never fired:
- it returned false for any daemon >= v1.3.0, on the false premise that
v1.3.0 checkpoints a rebuild (it does not; nothing survives a kill)
- it read a 16 KB debug.log tail and compared the last progress line with
the newest line, so any unrelated line during the rebuild's silent
second phase turned it off; and on POSIX that file is stale
- daemon_version, which the bypass needed, is zeroed when a busy node
drops the connection
Now a DaemonBusyTracker (src/daemon/daemon_busy_detect.h, pure) follows
dragonxd's own markers in order: rebuilding (Phase-1 / legacy markers,
ended by the completion line, an abort line or the next UpdateTip) and
replaying (Activating best chain ... Done Loading), reset by a new banner
or "Shutdown: done". It is fed from the owned output on the UI thread,
including the backlog skipped after a restore. The quit guard prompts
when the quit would stop the node and it is rebuilding, or has been
alive but only timing out / refusing as busy for >= 30 s. A replay alone
never prompts: stopping it is safe. The stop loop uses the same signal
to never offer Kill during a rebuild.
Also:
- daemon output offsets are absolute, so a reader that falls behind a
trim of the 1 MB buffer no longer skips new output (which could hide a
start or end marker)
- a quit deferred while minimized restores and raises the window, and
the wizard renders the prompt, so it is never waiting unseen
Verified live with the fake daemon: quitting mid-rebuild now shows the
prompt for a v1.3.0 node and leaves the node alone; a silent busy node
prompts after 30 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Closing the wallet sent "stop" at most twice, gated on a getinfo probe
that needs the daemon's cs_main, then killed the node after 20 s (Windows)
or 30 s (POSIX) whether or not stop had arrived. A node busy with an
hour-long witness rebuild therefore never got stop, was killed mid-
rebuild, and replayed everything since its last flush on every start.
Delivery (src/daemon/stop_delivery.h, RPCClient::open/trySendStop):
- stop goes over a dedicated client with no probe, so it never waits on
rpc_'s lock or a cs_main-bound getinfo
- every attempt is classified, and StopDeliveryPolicy decides the next:
Accepted / 503 = delivered; Queued (reply timeout) is resent at most
every 30 s; QueueFull / not listening are retried every 1.5 s; a
refusal after we were heard means the node is shutting down; a 401 on
our own node tries the next credential source
- POSIX: a group SIGTERM goes out as soon as an attempt fails, which
bypasses the HTTP queue entirely
Waiting (DaemonController::executeDaemonStop, pure, virtual-clock
tested):
- never kills on its own. Quitting waits as long as the node needs; the
shutdown screen offers "Close wallet — leave node running" after 3 s,
and "Kill node (unsafe)" (confirmed) only once stop was delivered and
the node showed no CPU/I-O progress for ~10 min outside a rebuild
- other callers (restart, rescan, reinstall, switch, ...) wait up to
120 s, let go once the app starts quitting, and keep watching a node
that is still running; wallet switch refuses to go ahead then
- EmbeddedDaemon gains stop-session primitives (beginStop,
pollOwnedProcess, signalGracefulStop, forceKillOwnedProcess,
ownedResourceUsage over the Linux process group / Windows handle,
endStop) and only one stop session runs at a time
- the Force Quit button and its stall heuristic are gone; "Leave
running" aborts a pending stop attempt and closes at once
Verified against the fake daemon with the real GUI: closing mid-rebuild
now delivers stop (or SIGTERM 2 ms after a queue-full refusal) and the
node exits cleanly after its rebuild, where it was SIGKILLed before. The
shutdown screen, its "Leave running" button and the idle Kill offer
(after ~11 min) were checked by screenshot. New strings are English-
only for now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Windows, stop() with no live process of its own looked up the first
"dragonxd.exe" by name and TerminateProcess'd it after the grace period:
an old node still shutting down (how an in-progress shutdown was killed),
a node on another datadir, or the user's main node. It was reached on a
lock-gated close, for an external node, after the tracked process had
exited, and from ~EmbeddedDaemon's stop(3000).
- Windows stop(): drop the by-name branch; with no tracked process it
logs and returns. findProcessByName is detection only.
- ~EmbeddedDaemon no longer calls stop(); it stops watching and releases
its handles. stop() returns whether the process exited on its own.
- SeedWalletCreator never sent its isolated node an RPC stop, so on
Windows that node was always force-killed holding the wallet.dat it
had just created, and the stack object's destructor could then kill
the main node by name. It now stops the node over the node's own RPC
on every path. A node that still had to be force-killed fails the
creation (seed wiped; nothing has been swept into it yet), so an
uncleanly closed wallet is never adopted.
- Reinstall waited only for the RPC port, which closes long before the
process exits (locked exe on Windows, held datadir lock everywhere).
It now waits for the process to exit and otherwise aborts without
touching the binaries or starting a second node.
- Linux isDaemonProcessRunning also matches /proc/<pid>/exe, so a node
whose main thread is already renamed "hush-shutoff" (still holding the
datadir lock) counts as running.
Tests: a Windows real-process test (a fake dragonxd.exe on an isolated
datadir survives stop() and the destructor), a POSIX test that the
destructor leaves the process running, and the pure identity rule.
scripts/test-windows.sh passes the stub path to the Windows suite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every caller guessed what went wrong from what(): "Timeout" meant busy,
"401" meant auth, and warmup was code -28 or one of six substrings. A
non-JSON HTTP 500 lost its body, so "Work queue depth exceeded" read as a
bare "HTTP 500", and libcurl reports connect- and reply-phase timeouts
with the same code.
New header-only src/rpc/rpc_failure.h:
- RpcFailureKind (NotListening, ConnectTimeout, ReplyTimeout, QueueFull,
ShuttingDown, Unhandled, Auth, Warmup, AppError, Aborted, Other) and a
pure classifyRpcFailure(curl code, request-sent, HTTP status, JSON-RPC
code, plain-text body)
- formatHttpError keeps a short, printable plain-text body
- RpcError (moved here) stays "the daemon answered with a JSON-RPC
error". The new RpcTransportError means "no JSON-RPC answer": curl
failures and HTTP-layer refusals (401, 503, queue full, unhandled).
Keeping them separate matters: callers catch RpcError to mean "the
daemon said no" (chat identity's no-mnemonic fallback, seed export),
so a timeout must not be one. They now treat a queue-full 500 as
transient rather than as "no".
RPCClient:
- performCall tells the two timeouts apart with CURLINFO_REQUEST_SIZE
(0 = never reached the daemon; reset on every transfer, checked on
libcurl 7.81), and callRaw now shares performCall and the HTTP-failure
path.
- connect() decides warmup by the -28 code only, so a plain-text body
saying "Loading" can't pass for warmup, and records
getLastConnectFailureKind().
- "Connection failed" names the kind and is logged once, then every
100th repeat (one incident logged it 60k times).
- secret-bearing calls never echo a response body.
tryConnect's "401"/"Timeout" checks now use the kind, and
CoreRefreshResult carries blockchainErrKind/balanceErrKind for the busy
handling to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
POSIX stop() set should_stop_, which made the monitor thread return
without reaping the child, and then polled the state-based isRunning(),
which stays true while the state is Stopping. So every Linux/macOS stop
waited out its whole grace period, sent SIGTERM, waited 10 s more and
SIGKILLed, even when the node had exited seconds earlier. Closing the GUI
with an idle node took ~30 s; a node still flushing at 30 s was killed.
- stop() joins the monitor first, then polls waitpid(pid, WNOHANG) on
a cached pid, so it is the only reaper and sees the exit at once.
- markStopRequested() (set by App::stopEmbeddedDaemon before the RPC
stop, and by stop() itself; cleared by start()) makes an exit that
lands before stop() runs a clean stop instead of a crash, on POSIX
and in the Windows monitor. crash_count_ drives auto-restart, and a
crash recorded before the request keeps its count.
- The SIGTERM -> SIGKILL escalation stays for now, but only fires for
a daemon that has really not exited. Replacing it with a wait policy
and an explicit user choice is follow-up work.
Verified against the fake daemon: an idle node that exits 3.4 s after
stop used to be SIGTERMed at +20 s and SIGKILLed at +30 s (GUI closed
in 30.6 s); it is now reaped as "exited cleanly" ~50 ms after it exits
(GUI closes in 4.0 s). New POSIX tests cover the clean exit, the early
requested exit and a graceful SIGTERM, each time-bounded so the old
code fails fast.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bug-report fixes plus adversarial-audit follow-ups. Bumps full 2.0.1->2.0.2 and
lite 1.1.0->1.1.1.
i18n / fonts:
- Rebuild the NotoSansCJK subset with the glyphs the FAQ back-fill introduced
(什/么/门/做); Chinese FAQ titles rendered as "??" on zh (and ja/ko).
Transaction history (enumeration gaps):
- Surface outgoing shielded z->z sends via z_listsentbyaddress (listtransactions
and z_listreceivedbyaddress never report them).
- Surface z->t deshields by parsing z_listsentbyaddress transparentSends (which
z_viewtransaction does not expose); dedupe t->t against listtransactions.
- Key send-row dedup on address so equal-value multi-output sends aren't dropped.
Lite wallet (key safety):
- The async create/restore/open path the UI uses now applies the passphrase:
encrypt a new/restored wallet, unlock an existing one. It previously discarded
the passphrase, storing the seed/keys in PLAINTEXT (create/restore) or leaving
an encrypted wallet locked (open).
Migrate-to-seed (fund safety):
- Persist a sweep-submitted marker at broadcast so a resumed migration can't treat
a ~0 balance (an unconfirmed in-flight sweep) as an empty wallet and adopt (swap
wallet.dat) before the sweep confirms; best-effort locate routes to the confirm gate.
Sync / threading:
- Gate isSynced() on a peer-derived tip (tip_known) so a peerless node isn't reported
synced (Send against a stale balance); add a "no peers" status banner.
- Guard daemon_status_ with a mutex (monitor-thread write vs UI-thread read).
Tests: extends tests/test_phase4.cpp across all of the above; suite green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwycPDQSfEKtrTS2uC4JeT
Ship https://lite6.dragonx.is and https://lite7.dragonx.is as default
lightwalletd servers in both the Settings defaults and the connection-service
fallback list. Existing installs (whose saved server list predates these)
pick them up via a load-time merge that appends any missing default server —
safe because servers are hidden, never deleted, so a removed server isn't
resurrected. Consolidates the Settings default list into a single
Settings::defaultLiteServers() source of truth.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump DRAGONX_LITE_VERSION 1.0.0 -> 1.1.0: since lite-1.0.0 the Lite variant
gained the whole 2.0.x shared UI/UX + diagnostics + i18n + perf work and this
session's chat delete/block — a minor bump (new features, no breaking change).
Make the FAQ variant-aware (walletFaq(fullNode)) so the Lite build reads
correctly: "What is ObsidianDragonLite?", encryption in the Wallet tab (not
Node & Security), migrate-to-seed hidden, node-specific answers reworded
neutrally ("the wallet syncs"), a new "Lite Wallet" subcategory (server model +
privacy tradeoff) standing in for the hidden Daemon group, and the redundant
single "Wallet" group tab dropped when there's no Daemon group to switch to.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Auto-shield status: the node's z_autoshieldstatus disabled_reason was echoed
verbatim ("HD seed origin is not known-recoverable; back the seed up and pass
-autoshield=1") and drawn INSIDE the Wallet OPTIONS checkbox grid, wedging a
full-width line between the checkboxes. Move it to a full-width note BELOW the
grid, and replace the raw daemon text with friendly, actionable wording keyed
on the seed_recoverable flag (back up your seed to enable it); the raw daemon
reason is kept on hover. Adds App::daemonAutoShieldSeedRecoverable().
- FAQ: add a Chat & Contacts entry ("How do I hide, delete, or block a
conversation?") covering the hide / delete-revive / delete-&-block actions and
the local-only caveat — data + i18n only, no UI code change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Immediate-mode render functions re-run every frame; these rebuilt O(N)
state each time even when nothing changed. From a 6-lens perf audit, each
finding verified on a hot-path basis:
- Console: ConsoleModel gains revision(); the full-model filter scan and the
glyph-by-glyph text-layout pass (BuildConsoleLayout) rebuild only when the
model / filter / wrap-width / zoom change — previously it re-shaped up to
10,000 lines every frame even when idle/scrolled. clear() force-invalidates
the memo mid-render (no OOB on the just-emptied visible set).
- Transactions: the summary-card totals memoize behind the tab's existing
FNV-1a fingerprint (also folds away a now-duplicate O(N) display-key pass).
- Send / Receive recent lists: early-exit the prefix scan (state.transactions
is kept newest-first) instead of filtering the whole tx history every frame.
- network_refresh_service: O(new x total) txid find-and-replace -> hash map.
- Sidebar unconfirmed-tx badge cached on last_tx_update + tx count; the
daemon-memory probe (/proc scan on Linux, popen on macOS) throttled to ~1.5s.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds a per-conversation "delete" with two modes, and removes the per-frame
rescans of the chat history that shared these files.
Delete conversation (header trash icon → confirm dialog):
- Delete (revive-on-new-message): clears local history and tombstones the
messages (new chat_deleted table, keyed dedup hashes) so the every-few-
seconds memo re-scan can't re-import them; a genuinely NEW message (new
txid) revives the thread.
- Delete & block: removes history WITHOUT a tombstone and records the cid as
blocked (settings); ChatService::ingest drops that conversation's messages
— old and future — until unblocked from the "Blocked" manager, which then
re-imports the conversation from chain.
- Local-only (messages remain on-chain; the peer keeps their copy).
deleteConversation() deletes the DB rows FIRST and only then mutates the
store, so a failed write can't leave the two diverged.
Unit-tested (revive / tombstone-survives-reload / block / unblock) and
adversarially reviewed (store/DB divergence, half-open DB, revive-unread).
Performance (chat + badge hot paths, from the perf audit):
- ChatStore gains revision(); the Chat unread badge is now a single O(N)
no-alloc pass cached on it (was O(conversations x messages) copy+sort every
frame). The conversation list and open thread are memoized on revision()
(+ show-hidden and AddressBook::revision() for peer-name resolution).
- AddressBook gains revision() so an in-place contact rename invalidates the
chat memo (an edit keeps entries().size() constant).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Chat/History nav buttons centered their icon+label in a region that
shrank when a badge (unread count / mining dot) was present, and the
"has badge" test read the LIVE count — so the text jumped sideways the
moment a count toggled (e.g. a new chat message arrived). Reserve badge
clearance by whether the page CAN show a badge (constant per item), center
in the full button width regardless, and cap the label with symmetric
clearance so a long label still can't run under the corner badge.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bundles the session's UI work (the touched files carry several of these
changes together, so they are committed as one coherent UI batch):
- FAQ: new RenderFaqDialog + data-driven faq_content, opened from a
status-bar "?" (and the Windows title bar), styled like the Wallets
modal with search, Wallet/Daemon tabs, and smooth scroll.
- DPI/font-scale audit: multiply hand-drawn absolute geometry by
Layout::dpiScale() across ~30 files so nothing renders native-size at
HiDPI / font_scale 1.5 (verified with a full sweep at 1.5x).
- Mining: chart now fills the horizontal space; thread stepper +/- buttons
match the input-box height; move the stratum-host toggle into
Node & Security (v1.3.0+).
- Settings: fix the auto-shield status text overlapping the grid.
- Sidebar: drop the peer-count badge on the Network button.
- i18n: wrap 193 hardcoded literals with TR() (keys/translations added in
the preceding i18n commit), so the security/PIN/lock flow, seed-backup
wizard, and witness-rebuild dialog localize.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the i18n source for 193 previously-hardcoded UI strings (the
security / PIN / lock flow, first-run seed-backup wizard, witness-rebuild
shutdown dialog, and balance / mining / explorer labels) so they can be
localized. The TR() call-site wrapping rides in the accompanying UI commit.
- 193 keys added to loadBuiltinEnglish() (the English source of truth),
including one pre-existing missing key (copied_to_clipboard).
- Additive res/lang/{de,es,fr,ja,ko,pt,ru,zh}.json (+193 each); every
translation's printf format-signature was validated against English
(0 mismatches) so the runtime validator accepts them.
- Rebuilt res/fonts/NotoSansCJK-Subset.ttf to cover ~30 new Han/Hangul
glyphs introduced by the zh/ja/ko translations (tofu-free).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The node kept falling behind the network near the tip because sync
DETECTION was starved: getblockchaininfo was queued behind the
O(mapWallet) wallet RPCs (z_gettotalbalance / z_listunspent), so
longestchain went stale, the wallet decided it was "synced", and it
resumed hammering cs_main — a feedback loop.
- Issue getblockchaininfo FIRST each cycle and skip the balance/address/
tx refresh entirely while behind, so sync state (and kSyncProfile)
updates before any heavy wallet scan runs.
- Gate the two chat note scans (refreshChatNoteBudgetNode /
fastScanChatMemos) on effectivelySyncing() and the active page, so chat
memo scanning no longer competes with block connection during sync.
- Windows debug.log tailer: reset the read offset when dragonxd truncates
the log on startup (it was stranding at Block:0 with no witness/rescan
progress).
- Tests cover the getblockchaininfo-first ordering and behind-skip.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The shutdown guard fired its "Node is rebuilding its witness cache" prompt almost always on an
active wallet: the daemon does a per-tx VerifyAndSetInitialWitness as each newly received wallet
tx lands during normal sync, and those markers (sparse — minutes apart — with no matching
"rebuilt N note witness cache(s) … in Xms") kept the heuristic latched "active".
- daemonWitnessRebuildActive() now requires the last progress marker to be part of the CURRENT
log activity (within ~15s of the newest log line, via a same-log timestamp delta), so routine
minutes-old per-tx witness sets no longer count as an ongoing rebuild.
- shouldConfirmDaemonStop() suppresses the prompt entirely on v1.3.0+ daemons (version >= 1030000):
they checkpoint witness-rescan progress, so stopping mid-rebuild resumes on the next start rather
than redoing it — the warning's "restarts it (several minutes)" premise no longer holds.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The daemon-output parser treats autonomous background witness rebuilds as a rescan (they set
state_.sync.rescanning via the foundWitness branch), so one completing fired "Blockchain rescan
complete" even though the user never started a rescan — most visibly after a minimize, where a
whole rebuild's start+finish arrives in one batch.
Add user_initiated_rescan_ (atomic — some triggers run on worker threads), set it at the wallet's
real rescan triggers (the Rescan button, a -rescan/salvage/zap/reindex restart, key import, seed
migration), and gate the three "rescan complete" toasts on it, clearing it when shown. The
rescan/witness progress state machine is untouched — only the toast is gated — so background
rebuilds no longer announce a completed rescan while genuine user rescans still do (and can't
double-toast).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Previously the main loop just did SDL_Delay+continue when minimized, skipping app.update() —
so the wallet stopped draining RPC results, ticking the refresh scheduler, and reconnecting
until it was restored (and a large daemon-output backlog piled up, which is what produced the
spurious "rescan complete" toast on restore).
Now app.update() runs while minimized (it only reads GetIO/GetTime/IsAnyItemActive, all valid
outside a NewFrame) with a real-clock DeltaTime, skipping only the ImGui frame + GPU present,
throttled to ~5 Hz so CPU stays near-idle. Also clamp io.DeltaTime at the top of App::update()
so a long minimize (or machine sleep) can't report a huge delta and fire every refresh/animation
timer at once on the next update. No backlog now builds, so skipDaemonOutputBacklog becomes a
harmless no-op.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
While minimized the main loop skips the frame body (SDL_Delay+continue), so App::update() —
which drains the daemon output via outputSince(daemon_output_offset_) — never runs and the
offset isn't advanced. On restore the whole accumulated backlog is parsed in one batch: a
background witness rebuild's progress lines (parsed as a rescan → state_.sync.rescanning=true)
AND its "rebuilt … in Xms" completion (parsed as finished) arrive together and fire
"Blockchain rescan complete" for a scan the user never initiated.
On WINDOW_RESTORED, discard the daemon-output backlog (advance the offset to the current end,
via App::skipDaemonOutputBacklog) before the resumed update parses it — so only new output is
parsed. Genuine user-initiated rescans still surface completion via the getrescaninfo monitor.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
It added clutter to the loading screen (the yellow title + two lines of explanatory text).
The live daemon-output panel below it is the real progress signal. connect_stall_since_ stays
maintained in app_network.cpp for connection bookkeeping; it just no longer drives any on-screen
text (loading_stall_* i18n strings + util::connectHasStalled are now unused).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add an opt-in "Host a mining pool (stratum)" toggle so a v1.3.0+ node can run its native
RandomX stratum server for other miners to point at. Settings toggle + optional allow-IP/CIDR;
passes -stratum (+ -stratumallowip) to the daemon launch args, mirroring the -maxconnections
plumbing (EmbeddedDaemon::setStratumHosting <- DaemonController::syncSettings <- Settings).
Backwards compatible / safe by default:
- UI gated on daemon_version >= 1030000, so it's never offered where it would do nothing.
- The launch flag is harmless on older daemons (they ignore unknown args), and the toggle can
only be enabled while connected to a v1.3.0+ node anyway.
- Blank allow-IP => the daemon serves loopback only (its safe default); entering a subnet opens
it to that LAN, with an explicit exposure warning in the UI.
- Takes effect on the next daemon start/restart.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Rec3 — v1.3.0+ opens a wallet that lost its hdchain in DEGRADED mode (existing funds spendable,
but no new HD-key derivation) instead of aborting. Add a daemon-log classifier
(walletOpenedDegraded) + detectWalletDegraded(), warned once per session. Pre-1.3.0 daemons
never emit that line, so it's a no-op there.
O1 — probe z_autoshieldstatus once per connection (now decoupled from our own toggle/balance) and,
in Settings, show whether the node handles auto-shield itself (+ its destination, or the daemon's
disabled_reason). The checkbox now governs only the wallet's fallback shielder, which defers to the
node. Nothing renders on pre-1.3.0 daemons (no such RPC), so behaviour is unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the wallet's stale hardcoded -addnode list (node. + node1-4.dragonx.is — a drifted
subset with a bogus bare 'node.') with the daemon's authoritative vSeeds: seed.dragonx.is (a
round-robin A record over the live seed set, so it self-updates without a wallet release) plus
node1/node5 as static fallbacks. Applied in both seeding sites: the launch args
(embedded_daemon.cpp) and the generated DRAGONX.conf (connection.cpp).
Kept (not deleted) — pre-1.3.0 daemons had broken peer discovery and rely on these -addnode
entries to find peers at all; plain hostname resolution works on every daemon version.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
v1.3.0 daemons auto-shield coinbase by default (when the HD seed is recoverable — which
every ObsidianDragon-created wallet is, via -usemnemonic=1). The wallet also ran its own
client-side auto-shield every refresh tick, so both raced for the same coinbase UTXOs and
split funds across different z-addresses (the wallet picks the first z_listaddresses entry;
the daemon uses a seed-hardened derivation).
Probe z_autoshieldstatus once per connection (while synced, so the daemon is past warmup)
and skip the wallet's client-side shield when the daemon reports it active. Fail-closed: a
pre-1.3.0 daemon has no such RPC, so the probe returns active=false and the wallet keeps
shielding — no regression on the currently-bundled v1.0.3. Re-probes on reconnect (handles
a live daemon upgrade/swap).
Follow-up (not done): drive the Settings "Auto-shield" toggle + disabled_reason from
z_autoshieldstatus (O1) — needs runtime verification of the RPC fields on a live v1.3.0 node.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
_popen/_popen-style shell-outs flash a cmd.exe console window on Windows. Add
Platform::runHiddenCapture() — CreateProcess + CREATE_NO_WINDOW capturing stdout on
Windows, popen on POSIX — and route the remaining shell-outs through it:
- GPU-aware idle detection (getGpuUtilization: "where nvidia-smi" / "nvidia-smi --query-gpu")
- xmrig discovery + version (findXmrigBinary "where xmrig.exe"; "<bin> --version", stderr merged)
- wallet-rebuild helper (app_network) — keeps its exit-code check via the new exitCode out-param
None of these are on the launch path (that was the daemon spawn, fixed in a2f84be); each
would flash a console only when it ran (idle-GPU mining, mining tab, wallet recovery).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The embedded daemon was launched with CREATE_NEW_CONSOLE + SW_HIDE. CREATE_NEW_CONSOLE
allocates a console window that flashes on screen before SW_HIDE hides it — visible as a
console-window flash every time the wallet starts dragonxd (i.e. on launch). Switch to
CREATE_NO_WINDOW (the console child gets no window at all, matching the xmrig launcher);
dragonxd logs to debug.log, not a console, so nothing is lost.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Stopping dragonxd while it's rebuilding the Sapling witness cache discards the
in-progress work — BuildWitnessCache aborts on shutdown without persisting — so
the next launch redoes a multi-minute rebuild (the "Activating best chain…" hang).
This bites especially with stop_external_daemon enabled, where wallet exit sends
the node a stop.
beginShutdown() now defers when it would StopDaemon while a rebuild is active and
shows a confirm modal: "Keep node running & quit" (DisconnectOnly — leaves it up
to finish), "Stop anyway & quit", or "Cancel". Rebuild detection reads the
debug.log tail markers (Cleared witness data / Setting Initial Sapling Witness /
Reading blocks for witness rebuild, vs. the "rebuilt … in …ms" / abort lines).
The gate lives entirely in beginShutdown()/render() — no SDL event-loop changes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Loading "taking longer than expected" notice: shorten the body + hint so the
startup screen reads less wordy (same info, ~half the text).
- Shutdown screen: when the wallet attached to an EXTERNAL daemon (no captured
stdout — debug_log_path_ is only set when we spawn it), the "dragonxd output"
panel was always empty, leaving just a spinner. Fall back to tailing the
daemon's debug.log so the user can watch the node flush the block index and
exit. Adds App::tailDaemonDebugLog() (best-effort, reads only the file tail).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On a fully-shielded (ac_private=1) chain, z_gettotalbalance is O(mapWallet) and
holds the daemon's cs_main for its whole duration — ~20s on a ~5k-tx wallet. The
Overview refresh polled it every ~2s (twice: minconf 0 and 1), so cs_main was
held almost continuously, starving the single block-connection thread: the node
connected blocks only in the gaps between polls and could fall further behind
the tip than it caught up (observed live: gap growing 58→100 blocks while the
GUI was open, one core pegged on GetFilteredNotes, 22 idle, ~17 B/s download).
Two hardening changes on top of the existing "skip balance while syncing" guard:
- Hysteresis: keep the low-impact sync profile (and balance suppression) for a
short settle window after catching up, so a large-wallet scan can't
immediately re-starve connection and bounce the node back into syncing. Armed
only on the syncing→caught-up edge, so a wallet synced from the start is never
throttled at connect (effectivelySyncing()).
- Adaptive balance cadence: time each z_gettotalbalance scan and require the
next poll to wait at least (cost / 10%), so balance scanning never occupies
more than ~10% of wall-clock. Cheap wallets are unaffected (the tab's Core
timer stays the cadence); a ~20s scan backs off to ~200s. Wallet mutations
(send/shield) force the next poll through so the user's own action updates the
balance immediately (balanceRefreshDue()).
getblockchaininfo keeps its normal cadence throughout, so sync progress stays
live. Build + test_phase4 green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Make Merge to Address actually serve wallet-bloat consolidation and be far less
opaque. New ShieldDialog::showConsolidate() preset (used by the large-wallet
Settings banner + alert action) frames it as "Consolidate funds" and targets
shielded notes — the bloat the nudge warns about.
- Source selector: consolidate shielded notes (ANY_SAPLING), transparent
(ANY_TADDR), or both (*) — previously hardcoded to ANY_TADDR, which never
reduced the shielded-witness bloat. Batch limit now applies to the right side.
- Scope: on open, count spendable UTXOs + notes (listunspent / z_listunspent)
and show "N transparent + M shielded · ~X DRGX"; warn "repeat to finish" when
the set exceeds one batch.
- Destination auto-selects the best spendable z-address (button enabled by
default); empty wallets get an inline "Create shielded address" (z_getnewaddress).
- Advanced disclosure hides Fee + "Max inputs per batch" (renamed from the "UTXO
Limit" jargon) with sane defaults.
- Inline confirm step before the fund-moving call (amount + input count + dest).
- Live progress: self-polls z_getoperationstatus to show Consolidating… →
Done/Failed, replacing the raw opid + manual "Check status" button.
All three merge entry points now use the typed showMerge()/showConsolidate()
(no stale-static leaks from direct show(MergeToAddress)). Shield-coinbase mode
keeps working. New i18n keys fall back to English.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Extend the wallet-bloat warning beyond the Settings banner: when wallet.dat
first crosses 500 MB (full-node, synced), fire a one-time warning toast plus a
clickable "Consolidate notes…" entry in the bell/alerts panel that opens Merge
to Address. The persisted large_wallet_warned flag keeps it once-only and
re-arms if the file later shrinks back under the threshold.
- AlertRecord gains an optional onClick + actionHint; Notifications::action()
pushes a toast and a clickable history entry. renderAlertHistoryPanel() now
renders the accent action link (under the message) and measures true content
height so wrapped messages + the link aren't clipped.
- App::maybeWarnLargeWallet() (mirrors maybeRemindSeedBackup) runs once per
launch from update(); reuses the existing wallet_size_warn/consolidate strings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The BDB wallet.dat bloats with shielded-note witness data and never shrinks
in place, so a mining/shielded wallet can grow past 500 MB. Below the Wallet
Size row, show a one-line amber hint once wallet.dat crosses 500 MB with a
"Consolidate notes…" shortcut that opens the Merge to Address (z_mergetoaddress)
dialog. Full-node only (lite has no wallet.dat here); threshold is a single
named constant. i18n keys fall back to English for non-English locales.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add "The DragonX Developers" to the About-tab credits (after The Hush
Developers), acknowledging the DragonX chain/daemon this wallet drives.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ensureLogoTexture() rasterized the embedded DragonX SVG into logo_tex_ and
returned early (added in 1752500 "themed DragonX logo"), so the app/product
branding — the top-left header (app.cpp AddImage) and the About tab
(getLogoTexture) — showed the DragonX coin mark instead of the ObsidianDragon
logo. Drop that step so logo_tex_ resolves via the intended path: active-skin
override → ui.toml header-icon → bundled ObsidianDragon dark/light PNG (disk,
then embedded RESOURCE_LOGO). The DragonX SVG stays for coin_logo_tex_ (balance
card) and drgx_emoji_tex_ (chat emoji), which are the currency mark and correct.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
DanSandClaude Opus 5.5