z_listsentbyaddress re-walks the whole wallet when there's no usable
watermark, which the daemon does under cs_main for every send -- hundreds
of seconds, 400+ s and ~19 GB RSS on a large wallet. The watermark lived
only in memory, so every relaunch, reconnect or daemon restart paid for a
full sweep. This persists it so those cases run a bounded windowed sweep
([z, 0, 2, tip - W + margin]) instead (SENT-HISTORY-SWEEP Part 1).
- The watermark (W = last swept tip), its anchor (A = W - margin) and anchor
hash (H_A = getblockhash(A)), plus the enrichment backlog and the full-
sweep backoff, ride in the encrypted history snapshot as an optional
`sent_sweep` object (schema stays v1; a missing/inconsistent one reads as
"no watermark" = today's behaviour, so older builds and payloads are safe).
- Before the first windowed sweep after a load, the anchor is verified
(getblockhash(A) == H_A). A match means any fork is inside the window; a
mismatch (reorg deeper than the margin, different chain/datadir) or an
inability to check drops the watermark and sweeps the whole wallet.
- The first sweep after a load uses a bigger margin (absorbs notifier lag),
and a watermark older than 2400 blocks uses the long timeout (callLong).
- The backlog is persisted WITH W: a pure z->z send's txid lives only in a
sweep result and would be lost if the window moved past an un-enriched one.
- Watermark changes reach disk (folded into the store signature), and every
hard case still forces a full sweep: reorg (anchor verify), GUI rescan /
zap / import / address change, restoreOriginalWallet, and disconnect.
Deferred (follow-ups, each only turns a correct-but-slow case faster, never a
correctness risk): the banded full sweep for seeding on a pre-note-cache
daemon, the external-import tripwire, and the weekly safety-net re-sweep.
Part 2 (the daemon's decrypt cost) is already on the daemon's
perf/sapling-note-cache branch.
Pure helpers + cache round-trip + anchor-verify/large-window covered by
tests; the getblockhash-after-sweep updates the pinned RPC sequences.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A z_sendmany submit set off a burst of wallet scans before anything had
changed. Ops now re-read the wallet when they finish, by who started them:
the user's sends and dialog ops get a re-read plus one forced balance once
none of their ops is pending; client auto-shield re-reads unforced; chat
messages and splits refresh only the chat note view. A pending send no
longer forces scans, and chat txids no longer enter the tracked-send set.
Chat ingest skips stored messages before decrypting and caches
undecryptable ones per identity. The inbox scan runs when getwalletinfo's
txcount changed (a cheap probe, at most 2% duty) or a cost-scaled safety
net is due; the note-buffer scan runs on need. Both are admitted by the
scan budget, on a steady clock. The chat payer comes from a per-address
view of verified notes, with debits re-applied across in-flight scans;
splits are sized to one payer and only when they can refill the buffer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Connect gate: after the node starts answering, wallet scans wait until the
lock state is known and the node knows its tip (or the wallet has fewer
than 500 transactions), at most 20 s. A node already behind latches the
sync profile from the connect's getinfo. Meanwhile a list-only pass keeps
the address list and the cached history up, and the session's first
balance and per-address balances are read once even while catching up,
so the wallet shows its last-synced values instead of 0.
- Background: minimized, hidden, or covered without focus (3 s debounce,
any input cancels) polls only the chain state every 15 s. Wallet scans,
the mining poll, price, nudges and auto-lock interaction tracking pause;
auto-lock now fires while minimized. Leaving a held profile marks every
timer due again.
- Tab entry marks the timers due instead of forcing scans; a stale list or
a never-loaded history still loads on entry.
- The scan entry points own the hard gates, failed enumerations keep the
previous lists behind a retry hold, and failed balance calls never
overwrite known balances with 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The balance, address scan, history and probe were throttled one by one at
10% each, which added up to 30-40% of dragonxd's cs_main with all of them
due. services::WalletScanGovernor runs one wallet scan at a time across
both RPC lanes and keeps one shared quiet clock at 15% of wall-clock (cut
when the node is behind). Waiters are served first in, first out, with a
head start for what the page shows and a starvation floor of max(30 s
visible / 900 s hidden, 15x the stream's cost). Explicit work (a dirty
set, the user's send, a first load) is never refused but is charged.
Routine scans run only when the tip, the mempool size (getmempoolinfo:
no cs_main) or a wallet-mutation epoch changed since their last good scan,
or a safety sweep is due. Pages that don't show the balance poll it at
most every max(10 min, 50x its cost) (2 min with client-side auto-shield);
coming back into view with an old value fetches it at once. The staleness
badge counts from the last poll that confirmed nothing changed, and hides
while the budget holds the balance within its guarantee.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every block re-ran z_listreceivedbyaddress for every z-address (O(wallet)
each, under cs_main) and a whole-wallet z_listsentbyaddress. On a 40-address
wallet that was ~80% of wall-clock. The history now advances in passes:
- an address is rescanned when it is stale by a number of blocks scaled to
its measured cost (8 to 500), never-scanned and hinted addresses first
(a hint: z_listunspent shows a note the history doesn't);
- z_listsentbyaddress covers only the blocks since the last good sweep
(+100 reorg margin); the whole-wallet sweep runs once per connect, with
a 10 min / 1 h / 6 h backoff after real failures;
- listtransactions pages are sized from last time, and an unchanged tip
reuses the transparent rows;
- found-but-unenriched txids carry over as a backlog; only -5 is a
definitive "not ours" for z_viewtransaction;
- between blocks, a cheap recent poll plus a one-address probe.
Duty model for a 40-address wallet at 10 s per scan: ~9% instead of ~80%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Core poll ran z_gettotalbalance twice (minconf 0 and 1), each a whole-
wallet scan under dragonxd's cs_main. The spendable (minconf=1) call now
runs only after the display call succeeded, and only when something is
unconfirmed or pending or the exact total moved: about 95% of polls make
one scan instead of two. A forced post-send balance can no longer be lost
to a refused enqueue, and pending-send debits aren't re-applied each tick.
z_getoperationstatus is filtered to our opids with its real argument form
([[id,...]]; the old ["id"] was rejected), falling back to the unfiltered
call if a daemon refuses the filter. The Shield/Merge dialog's own polls
are filtered and session-guarded too, and finally reach Done; the dead
RPCClient wrappers are deleted.
The Merge/Consolidate scope scan becomes a tested state machine: one scan
at a time, failures latch behind a Retry button, only "node not ready"
retries by itself (10/30/60 s, at most 3), Lite never scans. Its 120 s
calls are maintenance calls: every main-thread disconnect aborts one in
flight first, so a lifecycle action no longer freezes the UI behind it.
An aborted merge that was already sent says it may still go through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A send stays tracked until z_viewtransaction shows an outgoing output.
Shields, merges/consolidations and chat note splits pay only the wallet
itself, so they never showed one. They stayed tracked for the whole
session and forced a full history refresh past the scan throttle on
every tab.
- A tracked send whose view has no outgoing output is retired once it
is mined (1+ confirmations) or conflicted.
- Tracked sends are enriched first, and reaching the per-cycle view cap
no longer ends the loop, so the cap can't starve them.
- Backstop: a tracked send still unsettled 20 blocks after it was added
(expired, dropped from the mempool) stops being tracked.
- Tracked sends are cleared on disconnect: they belong to that
connection's wallet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Connected-but-locked fell through to tryConnect() on every Core tick
while the lock screen sat idle: new sockets, getinfo and getwalletinfo,
a forced address scan, a CoinGecko fetch and a wallet-index rewrite.
Its wallet scans also held cs_main ahead of the user's
walletpassphrase.
- While locked, poll chain state only (refreshCoreData without the
balance). That keeps the sync height current and the 3-strike
lost-connection check armed, so a node that exits while locked is
still restarted. Pool mining keeps the lock screen down, so while it
runs the throttled balance, the peers and the lock state (for an
unlock done in the Console tab) keep refreshing too.
- Warmup polls count refused/reset connections toward the
lost-connection check, so a node that died during warmup is
restarted instead of leaving the loading or lock screen over it.
- The wallet salvage/degraded detectors run at connect and again when
warmup ends: for encrypted wallets they relied on the repeated
tryConnect.
- restartDaemonAfterEncryption records the wallet as encrypted and
locked itself (the wizard's deferred path never did), and marks the
main client disconnected so the reconnect path picks up the restarted
node, aborting any in-flight call first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dragonxd serves RPC with 8 workers and a 16-deep queue. While a witness
rebuild holds cs_main, every request needing it waits, and a request the
client gave up on keeps its slot. The GUI kept polling and re-probing
until all 24 slots were its own abandoned requests (even stop was then
refused), treated the busy node as lost (tearing down the wallet state),
and retried connect at frame rate on some pages.
Busy gate (src/rpc/rpc_busy_gate.h), enforced in RPCClient::performCall
for the shared rpc_ / fast_rpc_:
- the first reply timeout or queue-full refusal marks the node busy;
from then on nothing needing cs_main is sent (calls fail at once with
the new RpcFailureKind::Deferred). stop, help and getrescaninfo are
lock-free in dragonxd and always go through
- one canary getinfo with no client timeout waits on its own client and
thread; its answer clears the gate and triggers an immediate refresh
(queue-full: retried after 2..30 s; no answer: back to normal handling)
- the timer dispatch skips Core/Tx/Addresses/Peers/chat/mining/opid and
connect attempts while busy
- the 3-strike teardown counts only failures that put the connection in
doubt, never busy ones; no balance scans follow a busy chain-info call
Reconnect storm: retries were armed with setTimer(Core, kCoreDefault - 1),
i.e. "4 s elapsed", which against Overview's 2 s interval meant every
frame. RefreshScheduler::deferFor() is an absolute hold, and
ConnectRetryBackoff picks the delay by failure kind (not listening
1/2/5 s, queue full 2..30 s, busy 30 s, else 4 s).
Measured against the fake daemon: abandoned requests during a rebuild
went from ~24 (every slot) to at most 2, with no teardown and recovery
when the rebuild ends; a saturated queue sees about one canary per
back-off step instead of ~190 requests/s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every caller guessed what went wrong from what(): "Timeout" meant busy,
"401" meant auth, and warmup was code -28 or one of six substrings. A
non-JSON HTTP 500 lost its body, so "Work queue depth exceeded" read as a
bare "HTTP 500", and libcurl reports connect- and reply-phase timeouts
with the same code.
New header-only src/rpc/rpc_failure.h:
- RpcFailureKind (NotListening, ConnectTimeout, ReplyTimeout, QueueFull,
ShuttingDown, Unhandled, Auth, Warmup, AppError, Aborted, Other) and a
pure classifyRpcFailure(curl code, request-sent, HTTP status, JSON-RPC
code, plain-text body)
- formatHttpError keeps a short, printable plain-text body
- RpcError (moved here) stays "the daemon answered with a JSON-RPC
error". The new RpcTransportError means "no JSON-RPC answer": curl
failures and HTTP-layer refusals (401, 503, queue full, unhandled).
Keeping them separate matters: callers catch RpcError to mean "the
daemon said no" (chat identity's no-mnemonic fallback, seed export),
so a timeout must not be one. They now treat a queue-full 500 as
transient rather than as "no".
RPCClient:
- performCall tells the two timeouts apart with CURLINFO_REQUEST_SIZE
(0 = never reached the daemon; reset on every transfer, checked on
libcurl 7.81), and callRaw now shares performCall and the HTTP-failure
path.
- connect() decides warmup by the -28 code only, so a plain-text body
saying "Loading" can't pass for warmup, and records
getLastConnectFailureKind().
- "Connection failed" names the kind and is logged once, then every
100th repeat (one incident logged it 60k times).
- secret-bearing calls never echo a response body.
tryConnect's "401"/"Timeout" checks now use the kind, and
CoreRefreshResult carries blockchainErrKind/balanceErrKind for the busy
handling to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bug-report fixes plus adversarial-audit follow-ups. Bumps full 2.0.1->2.0.2 and
lite 1.1.0->1.1.1.
i18n / fonts:
- Rebuild the NotoSansCJK subset with the glyphs the FAQ back-fill introduced
(什/么/门/做); Chinese FAQ titles rendered as "??" on zh (and ja/ko).
Transaction history (enumeration gaps):
- Surface outgoing shielded z->z sends via z_listsentbyaddress (listtransactions
and z_listreceivedbyaddress never report them).
- Surface z->t deshields by parsing z_listsentbyaddress transparentSends (which
z_viewtransaction does not expose); dedupe t->t against listtransactions.
- Key send-row dedup on address so equal-value multi-output sends aren't dropped.
Lite wallet (key safety):
- The async create/restore/open path the UI uses now applies the passphrase:
encrypt a new/restored wallet, unlock an existing one. It previously discarded
the passphrase, storing the seed/keys in PLAINTEXT (create/restore) or leaving
an encrypted wallet locked (open).
Migrate-to-seed (fund safety):
- Persist a sweep-submitted marker at broadcast so a resumed migration can't treat
a ~0 balance (an unconfirmed in-flight sweep) as an empty wallet and adopt (swap
wallet.dat) before the sweep confirms; best-effort locate routes to the confirm gate.
Sync / threading:
- Gate isSynced() on a peer-derived tip (tip_known) so a peerless node isn't reported
synced (Send against a stale balance); add a "no peers" status banner.
- Guard daemon_status_ with a mutex (monitor-thread write vs UI-thread read).
Tests: extends tests/test_phase4.cpp across all of the above; suite green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwycPDQSfEKtrTS2uC4JeT
The node kept falling behind the network near the tip because sync
DETECTION was starved: getblockchaininfo was queued behind the
O(mapWallet) wallet RPCs (z_gettotalbalance / z_listunspent), so
longestchain went stale, the wallet decided it was "synced", and it
resumed hammering cs_main — a feedback loop.
- Issue getblockchaininfo FIRST each cycle and skip the balance/address/
tx refresh entirely while behind, so sync state (and kSyncProfile)
updates before any heavy wallet scan runs.
- Gate the two chat note scans (refreshChatNoteBudgetNode /
fastScanChatMemos) on effectivelySyncing() and the active page, so chat
memo scanning no longer competes with block connection during sync.
- Windows debug.log tailer: reset the read offset when dragonxd truncates
the log on startup (it was stranding at Block:0 with no witness/rescan
progress).
- Tests cover the getblockchaininfo-first ordering and behind-skip.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On a fully-shielded (ac_private=1) chain, z_gettotalbalance is O(mapWallet) and
holds the daemon's cs_main for its whole duration — ~20s on a ~5k-tx wallet. The
Overview refresh polled it every ~2s (twice: minconf 0 and 1), so cs_main was
held almost continuously, starving the single block-connection thread: the node
connected blocks only in the gaps between polls and could fall further behind
the tip than it caught up (observed live: gap growing 58→100 blocks while the
GUI was open, one core pegged on GetFilteredNotes, 22 idle, ~17 B/s download).
Two hardening changes on top of the existing "skip balance while syncing" guard:
- Hysteresis: keep the low-impact sync profile (and balance suppression) for a
short settle window after catching up, so a large-wallet scan can't
immediately re-starve connection and bounce the node back into syncing. Armed
only on the syncing→caught-up edge, so a wallet synced from the start is never
throttled at connect (effectivelySyncing()).
- Adaptive balance cadence: time each z_gettotalbalance scan and require the
next poll to wait at least (cost / 10%), so balance scanning never occupies
more than ~10% of wall-clock. Cheap wallets are unaffected (the tab's Core
timer stays the cadence); a ~20s scan backs off to ~200s. Wallet mutations
(send/shield) force the next poll through so the user's own action updates the
balance immediately (balanceRefreshDue()).
getblockchaininfo keeps its normal cadence throughout, so sync progress stays
live. Build + test_phase4 green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Security audit remediation (15 confirmed findings from the codebase audit):
- H-02: scrub+delete the decrypt-flow plaintext key export on ALL exit paths
(RAII guard) and purge stale obsidiandecryptexport* files at startup.
- M-01/L-03/L-04/L-05/L-07: sodium_memzero the Set-PIN and encrypt-PIN worker
passphrase/PIN copies, the RPC Basic-auth string (auth_), the exported/imported
key buffers (App::wipeSecrets, called from ~App and before main's _Exit), and
the first-run wizard "Skip" buffers.
- M-03/M-04/M-05/L-06: return locked COPIES from XmrigManager/EmbeddedDaemon
getters (dedicated error_mutex_; DaemonController::lastError now by value),
route xmrig last_error_ writes through a locked setter, and wrap
shutdown_status_/wizard_stop_status_ in a locking GuardedStatus
(wizard_stopping_external_ -> std::atomic).
- M-02: persist after a console send/shield/import in the lite backend.
- L-01: require the confirm click for z_shieldcoinbase/z_mergetoaddress.
- L-02: quote/escape each Windows daemon argv per the MSDN CommandLineToArgvW rules.
- L-08: pin json/tomlplusplus/libwebp FetchContent to immutable commit SHAs.
- I-01: extract updater archives from the already-verified in-memory buffer
(no disk re-read TOCTOU).
Feature: warn once (full-node) when the active wallet loads empty while a sibling
wallet file in the datadir holds keys. A funded salvage wallet.<ts>.bak routes to
the recovery/Restore flow; a funded sibling .dat routes to the wallet manager.
Per-wallet-file dismissal; gated on synced + address-list-loaded to avoid false
positives on warm reconnect / spent-down wallets.
UX fixes:
- send: show the TOTAL balance (with a spendable "available" note) in the source
dropdown and keep pending-change addresses visible.
- chat: insert emoji at the cursor position; restrict new-chat recipients to
shielded (z) addresses.
- console: optional auto-focus of the command input on tab open (off by default).
- shutdown: when "stop external daemon" is on, keep the shutdown screen up until
the external node actually exits, showing live status.
Adversarially reviewed; verified across full-node, lite, and Windows builds; tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Sending a small amount from an address holding a large balance made the displayed
balance collapse to ~0 until the tx confirmed. A shielded spend consumes the whole
source note; the change returns as a 0-confirmation note, and every balance query
used the default minconf=1 — so the spent note dropped out and the change wasn't
counted yet.
Split every balance into two views:
- DISPLAY (balance / privateBalance / transparentBalance / totalBalance) — now
queried at minconf=0, so it INCLUDES the user's own pending change and no longer
craters. This is what the Overview, balance tab, market portfolio and receive
tab show. unconfirmedBalance is now populated (= total - spendable).
- SPENDABLE (new spendableBalance / spendable*Balance) — confirmed (minconf>=1),
what z_sendmany (run at minconf=1) can actually spend. The Send form's available/
Max/validation, the from-address selection, the drag-to-transfer dialog cap, the
chat pay-from and the auto-shield gate all size off these, so they never offer
0-conf change the daemon would reject.
Implementation: a single z_listunspent(0)/listunspent(0), partitioned per-note by
"confirmations">=1; z_gettotalbalance called at minconf 0 (display) and 1
(spendable); the z_getbalance fallback queries both. applyPendingSendDelta (the
optimistic post-send debit) now touches ONLY the spendable fields — debiting the
display too would re-crater it on top of the honest minconf=0 RPC. Lite mirrors
spendableBalance = balance (its per-address balance is already confirmed) so lite
sends aren't zeroed. The confirmed-only gates (seed-migration/sweep z_gettotalbalance,
sweep z_getbalance(addr,1), z_sendmany's minconf arg) are untouched.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Portfolio-group sparklines previously resampled the ~24-minute in-session price
buffer, so the hour/day/week/month intervals could never fill. Fetch real
historical USD series from CoinGecko /market_chart and back each interval with
appropriately-grained data.
- MarketInfo gains two timestamped series: price_chart_intraday (days=1, 5-min)
and price_chart_daily (days=365, daily), plus a fetch timestamp.
- App::refreshMarketChart() fetches both on the RPC worker via the TLS-verifying
util::httpGetString helper, self-throttled to ~30 min (historical data moves
slowly). Gated by getFetchPrices(); triggered on connect and each price tick.
- Pure NetworkRefreshService::parseCoinGeckoMarketChart() parses {"prices":
[[ms,price],...]} into (unix-seconds, price); malformed rows skipped. Unit-tested.
- market_tab pfSparklineSeries() maps interval -> series+bucket: minute = live
buffer; hour = intraday bucketed to 1h; day/week/month = daily bucketed to
1d/7d/30d. Falls back to the in-session buffer until the fetch populates.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Three P1 structural refactors from the audit; no behavior change.
1. Extract the ~180-line daemon-stdout rescan/witness parser out of the
~790-line App::update() into a pure, static, unit-testable
NetworkRefreshService::parseDaemonRescanOutput() returning a
DaemonRescanScan result struct (sits next to the existing static parse*
siblings). The scanning half moved verbatim; App::update() keeps the
state-application half, now reading scan.* fields. Adds
testParseDaemonRescanOutput() covering all six daemon signals + edge
cases against fixture log snippets — previously untestable without a
live daemon.
2. Extract the ~95-line global keyboard-shortcut block (Ctrl+, / theme
cycle / F5 / low-spec / effects / gradient / wizard) out of
App::update() into App::handleGlobalShortcuts().
3. Collapse the ImGuiAcrylic frontend fork: the GLAD and DX11 namespaces
were ~375 lines of semantically-identical code (the frontend makes zero
direct GL/DX calls — all backend work delegates to AcrylicMaterial, which
has a backend per API). Extended the single frontend's guard to
#if defined(DRAGONX_HAS_GLAD) || defined(DRAGONX_USE_DX11) and deleted the
DX11 duplicate, leaving the no-backend stub. Kills the Windows/DX11 drift
hazard (acrylic frontend changes now made once).
Verified: full-node + Lite build clean; ctest 1/1 (incl. the new parser
tests); source-hygiene clean; and the collapsed acrylic path was
compile-verified under DX11 via the mingw-w64 Windows cross-build
(ObsidianDragon.exe links).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The full-node wallet polled the daemon at the per-tab cadence regardless of sync state.
On the Peers/Network tab that meant getpeerinfo every 5s + core every 5s + a full
transaction scan on every new block — and blocks arrive fast during sync. Each of those
calls takes the daemon's cs_main lock, the same lock block connection needs, so the node
synced noticeably slower than on the lightweight Console tab (core 10s, no peer polling).
Make the refresh cadence sync-aware:
- RefreshScheduler::kSyncProfile {core 10s, transactions/addresses/peers disabled} is applied
to ALL tabs while state_.sync.syncing, and reverts to the per-tab profile when sync ends.
applyRefreshPolicy() picks the profile; update() re-applies it on the syncing<->synced
transition. This suppresses getpeerinfo and the per-block tx scan during sync (that data is
incomplete mid-sync anyway) — every tab now syncs as fast as Console.
- collectCoreRefreshResult(rpc, includeBalance): skip z_gettotalbalance (wallet lock + cs_main)
while syncing; only getblockchaininfo runs, which is also what drives sync-progress detection.
applyCoreRefreshResult already leaves the balance untouched when balanceOk is false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two issues shared one root cause: the shielded-receive scan marked each z-address "scanned
at the EXACT current tip," but a new block (~36s on DRGX) advances the tip and invalidates
every prior per-address scan. A wallet with more z-addresses than one refresh cycle can
scan therefore never reached "all scanned at tip" — so shieldedScanComplete stayed false
and transactions_dirty_ stayed true forever, which (a) kept the history-refresh banner lit
and the full rescan churning every cycle, and (b) blocked maybeFinishTransactionSendProgress
(it waited on transactions_dirty_), leaving the send-progress indicator stuck on.
Fix 1 — completion tolerance. Add TransactionRefreshSnapshot::shieldedScanTipTolerance: an
address counts as fresh if its last scan is within N blocks of the tip (0 = old strict
behavior, so existing tests are unchanged). The app scales N with the z-address count
(2 + count/96, capped at 50), so a multi-block pass can COMPLETE before its earliest scan
goes stale. This also throttles full rescans to ~N blocks instead of every block —
transactions_dirty_ clears, the banner stops, and CPU/RPC churn drops. Already-fresh
addresses are skipped, so the per-block cost falls back to just the (cheap) transparent
listtransactions.
Fix 2 — send-progress gate. maybeFinishTransactionSendProgress() no longer waits on the
transaction history scan (transactions_dirty_ / Transactions job): the sent tx is already
shown via the optimistic pending insert, and the spend is reflected once the balance
refresh lands, so it now finishes on the address/balance signal alone.
Test: a tolerant snapshot skips recently-scanned addresses (shieldedAddressesScanned == 0,
shieldedScanComplete) while a strict one re-scans them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
z_sendmany returns an opid immediately; the tx is built/signed/broadcast
asynchronously afterward. The send path showed "Transaction sent successfully!"
and cleared the form on opid receipt, so a later async failure contradicted it.
Shield/merge stored the opid only in a dialog-local static (never polled), and
auto-shield ran a blocking z_shieldcoinbase on the UI thread and discarded its
opid — async failures of all three were silently lost.
- Add App::trackOperation(opid) so shield/merge/auto-shield register with the
shared opid poller (failures surface, balances refresh on completion).
- Defer the full-node send's success/failure to the poller via per-opid callbacks
(parseOperationStatusPoll now exposes failureByOpid); the "Sending..." spinner
covers the finalizing window, and the form is kept until terminal status.
- Dispatch auto-shield through the worker thread and use the configured fee.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Preserve the previously-uncommitted lite wallet implementation and related dev WIP
under version control:
- src/wallet/ lite services: client bridge, bridge runtime, connection, lifecycle,
sync, gateway, result parsers, state mapper, artifact contract/resolver, refresh
services, UI adapters, wallet_backend/capabilities. (Includes two small M1 fixes:
lifecycle walletReady now parses the response; default chain name -> "main".)
- src/chat/ chat protocol; tests/fixtures/ (lite + hushchat); tools/hushchat_fixture_check.cpp;
scripts/build-lite-backend-artifact.sh.
- Pre-existing modified app_network/security/wizard, network_refresh_service, sidebar,
mining_tab, bootstrap dialog, and version headers captured as-is.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add an encrypted SQLite transaction history cache with cached tip metadata and
per-address shielded scan progress so startup and full refreshes avoid
re-scanning every z-address while still invalidating on wallet/address/rescan
changes.
Improve wallet history loading by paging transparent transactions, preserving
cached shielded and sent rows, keeping recent/unconfirmed activity visible, and
classifying mining-address receives. Show z_sendmany opid sends immediately in
History and Overview, pin pending rows through refreshes, and apply optimistic
address/balance debits until opids resolve.
Add timestamped RPC console tracing by source/method without logging params or
results, reduce redundant refresh/RPC calls, and cache Explorer recent block
summaries in SQLite.
Expand focused tests for transaction cache encryption, scan-progress
persistence/invalidation, history preservation, operation-status parsing,
pending send visibility, and Explorer/RPC refresh behavior.
Replay cached outgoing viewtransaction entries during transaction refresh so shielded sends created from the wallet remain in the History tab after send tracking is cleared.
Keep incomplete tracked sends retryable, preserve cached send timestamp/confirmation metadata, and emit a send placeholder from gettransaction metadata when viewtransaction enrichment is not yet available.
Add regression coverage for cached sends, retryable empty entries, placeholder sends, and send txid cleanup behavior.
DanSandClaude Opus 4.8