The miner's stats and pool-API fetches are blocking HTTP calls on the
monitor thread with multi-second timeouts. When the miner was stopped,
stop() still had to wait out an in-flight request before the monitor
thread could join.
- Both fetches now install a curl progress callback that aborts the
transfer as soon as a stop is requested, so a request in flight ends
promptly instead of running down its timeout.
- An abort triggered by stop is treated as a clean cancellation, not a
fetch failure, so it is not logged or counted against the failure
warning.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Stopping the miner closed the stdout pipe before joining the monitor
thread, and the UI thread's stats poll also drained stdout. Either path
could read or close a descriptor the other side was still using, so a
read could land on a closed or already-reused fd.
- stop() now joins the monitor thread first and only then closes the
process handle and the stdout pipe, so nothing is draining the pipe
when it is closed.
- The stdout drain is serialized under its own mutex, and the UI
thread's stats poll no longer drains stdout at all: the monitor thread
is the sole reader. The process handle, pid and fds are atomic so they
can be observed safely from the memory probe.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The embedded daemon and the xmrig manager each kept their own copy of
the console output ring: append new bytes, trim the front to a cap at a
newline boundary, and hand a reader everything since its offset. The two
copies had drifted. The daemon tracked an absolute byte total so a
reader's offset stayed valid across a front-trim, while the miner keyed
its reader off the live buffer size, so a trim could silently rewind the
console feed.
- The append/trim and the since-offset logic now live in one small
header, outputWindowSince and appendBounded, included by both. The
trim keeps the newline-boundary cut and the guard that stops a lone
trailing newline from erasing the whole buffer.
- The xmrig manager now carries the same absolute byte total, so its
reader resolves against the window the same way and survives a trim
(and a process restart that clears the buffer but keeps the total).
Tests cover feeding the ring well past the trim point while a reader
polls each chunk (the feed is continuous and never dies at the trim),
the lone-trailing-newline guard, and a cleared buffer with a retained
total.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The requested thread count is written by generateConfig() on the
mining-control thread and read on the UI thread (the thread-grid sync
under idle thread scaling, the pool auto-balance restart) without any
synchronisation. The write also stored the unclamped count first and
clamped it afterwards, so a reader could see more threads than cores.
It is now an atomic, set by one store of the clamped value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Security audit remediation (15 confirmed findings from the codebase audit):
- H-02: scrub+delete the decrypt-flow plaintext key export on ALL exit paths
(RAII guard) and purge stale obsidiandecryptexport* files at startup.
- M-01/L-03/L-04/L-05/L-07: sodium_memzero the Set-PIN and encrypt-PIN worker
passphrase/PIN copies, the RPC Basic-auth string (auth_), the exported/imported
key buffers (App::wipeSecrets, called from ~App and before main's _Exit), and
the first-run wizard "Skip" buffers.
- M-03/M-04/M-05/L-06: return locked COPIES from XmrigManager/EmbeddedDaemon
getters (dedicated error_mutex_; DaemonController::lastError now by value),
route xmrig last_error_ writes through a locked setter, and wrap
shutdown_status_/wizard_stop_status_ in a locking GuardedStatus
(wizard_stopping_external_ -> std::atomic).
- M-02: persist after a console send/shield/import in the lite backend.
- L-01: require the confirm click for z_shieldcoinbase/z_mergetoaddress.
- L-02: quote/escape each Windows daemon argv per the MSDN CommandLineToArgvW rules.
- L-08: pin json/tomlplusplus/libwebp FetchContent to immutable commit SHAs.
- I-01: extract updater archives from the already-verified in-memory buffer
(no disk re-read TOCTOU).
Feature: warn once (full-node) when the active wallet loads empty while a sibling
wallet file in the datadir holds keys. A funded salvage wallet.<ts>.bak routes to
the recovery/Restore flow; a funded sibling .dat routes to the wallet manager.
Per-wallet-file dismissal; gated on synced + address-list-loaded to avoid false
positives on warm reconnect / spent-down wallets.
UX fixes:
- send: show the TOTAL balance (with a spendable "available" note) in the source
dropdown and keep pending-change addresses visible.
- chat: insert emoji at the cursor position; restrict new-chat recipients to
shielded (z) addresses.
- console: optional auto-focus of the command input on tab open (off by default).
- shutdown: when "stop external daemon" is on, keep the shutdown screen up until
the external node actually exits, showing live status.
Adversarially reviewed; verified across full-node, lite, and Windows builds; tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- app: periodic weighted-random auto-balance of the pool while pool-mining
(~30-min cadence; restarts the miner only when the pick actually changes),
plus snapshot + refresh accessors for the UI.
- app_network: resolve the xmrig algo per pool at start (pool.dragonx.cc =
rx/dragonx, pool.dragonx.is = rx/hush; custom hosts keep the setting).
- xmrig_manager: schema-aware pool-side hashrate readout (fixes a silent 0 for
Miningcore pools); expose the running miner's version from its HTTP API and a
cached `xmrig --version` detection so the UI can show it before mining.
- wallet_state: carry the running miner's version.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Add pool mining thread benchmark: cycles through thread counts with
20s warmup + 10s measurement to find optimal setting for CPU
- Add GPU-aware idle detection: GPU utilization >= 10% (video, games)
treats system as active; toggle in mining tab header (default: on)
Supports AMD sysfs, NVIDIA nvidia-smi, Intel freq ratio; -1 on macOS
- Fix idle thread scaling: use getRequestedThreads() for immediate
thread count instead of xmrig API threads_active which lags on restart
- Apply active thread count on initial mining start when user is active
- Skip idle mining adjustments while benchmark is running
- Disable thread grid drag-to-select during benchmark
- Add idle_gpu_aware setting with JSON persistence (default: true)
- Add 7 i18n English strings for benchmark and GPU-aware tooltips
Build & setup:
- Fix setup.sh and build.sh for macOS (bundle daemon, xmrig, sapling params, asmap.dat into .app)
- Fix CMakeLists.txt libsodium linking for macOS
- Fix incbin.h to use __DATA,__const section on macOS
- Remove vendored libsodium-1.0.18 source tree (use fetch script instead)
- Remove prebuilt-binaries/xmrig (replaced by xmrig-hac)
- Add .DS_Store to .gitignore
Rendering & UI:
- Use GLSL #version 150 and OpenGL 3.2 Core Profile on macOS
- Force dpiScale=1.0 on macOS to fix Retina double-scaling
- Set default window/UI opacity to 100% on Mac/Linux
- Add scroll fade shader guard for macOS GL compatibility
- Add ImGui error recovery around render loop and mining tab
Daemon & bootstrap:
- Fix getDragonXDataDir() to return ~/Library/Application Support/Hush/DRAGONX/ on macOS
- Fix isPortInUse() with connect() fallback (no /proc/net/tcp on macOS)
- Increase daemon watchdog timeout from 3s to 15s
- Add daemon status indicator (colored dot + label) in wizard bootstrap phases
Mining tab:
- Fix EmbeddedDaemon::getMemoryUsageMB() crash on macOS (was using Linux /proc)
- Fix XmrigManager::getMemoryUsageMB() to use ps on macOS instead of /proc
- Restructure RenderMiningTab with wrapper pattern for exception safety
- Fix default pool URL to include port (pool.dragonx.is:3433)
- Replace all hardcoded English strings with TR() translation keys across
every tab, dialog, and component (~20 UI files)
- Expand all 8 language files (de, es, fr, ja, ko, pt, ru, zh) with
complete translations (~37k lines added)
- Improve i18n loader with exe-relative path fallback and English base
fallback for missing keys
- Add pool-side hashrate polling via pool stats API in xmrig_manager
- Introduce Layout::beginFrame() per-frame caching and refresh balance
layout config only on schema generation change
- Offload daemon output parsing to worker thread
- Add CJK subset fallback font for Chinese/Japanese/Korean glyphs
Full-node GUI wallet for DragonX cryptocurrency.
Built with Dear ImGui, SDL3, and OpenGL3/DX11.
Features:
- Send/receive shielded and transparent transactions
- Autoshield with merged transaction display
- Built-in CPU mining (xmrig)
- Peer management and network monitoring
- Wallet encryption with PIN lock
- QR code generation for receive addresses
- Transaction history with pagination
- Console for direct RPC commands
- Cross-platform (Linux, Windows)
DanSandClaude Opus 4.8