DanSandClaude Opus 5.5
a5db2e9a3d
The lightwalletd server controls the compact ciphertext length, the block, prev-block and tx hash lengths, and (through the chain) the full txs' epks. Each of these could wedge or poison a sync: - try_sapling_compact_note_decryption asserts a 52-byte ciphertext. A shorter (or full 580-byte) one panicked a pool job in scan_output_internal while the original sender stayed alive, so the collector waited forever with sync_lock, txs.write() and a wallet read guard held. - scan_taddress_txids kept its own sender alive too: one panicking t-address job (scan_full_tx) left crx.iter().take(n) blocked forever. - CompactBlock::hash()/prev_hash() assert 32 bytes when no header is sent, and every vtx hash is copied into a [u8; 32], one of them under txs.write(): a 31-byte tx hash poisoned the wallet for good, and a bad hash in the block's txid list panicked after the witnesses had moved. - scan_full_tx and scan_full_mempool_tx unwrapped as_prime_order() on the epk. Consensus rejects only a small-order epk, so a mixed-order one can be mined: an own tx then failed every sync, and the mempool receiver thread died silently. Changes: - append_leaf(node: Node, ..) commits a leaf to the existing, block and new witnesses and the tree; the epk-error path, the new short-ciphertext path and the normal path all use it (a behaviour-neutral extraction). - A compact ciphertext under 52 bytes is skipped with its cmu still committed; a longer one is truncated to 52 bytes, which is exact (the compact plaintext is those bytes and the cmu re-check validates it). - Each decryption job catches a panic and sends exactly one message; drop(tx) after the dispatch, and the collector logs a vanished or panicked job and treats the output as not ours. - scan_taddress_txids runs through the private seam scan_taddress_txids_with(job): catch_unwind per job, drop(ctx), and a count check, so a dead job is an error, never a hang or a silent partial success. - scan_block_with_pool checks the block, prev-block and vtx hash lengths right after the parse and returns Err(-1), as for an unparsable block, before any change (Err(height) would refetch the same block forever under sync_lock). - scan_full_tx and scan_full_mempool_tx skip an output whose epk is not in the prime-order subgroup (one check per output, used by every decryption and the outgoing recovery). - The mempool receiver thread catches a panic of scan_full_mempool_tx. Flagged behaviour changes: - a compact ciphertext under 52 bytes is skipped (its cmu is still committed); one over 52 bytes is truncated; - pool-job panics are reported (logged; the output is treated as not ours, which a rescan repairs) instead of hanging the sync; - bad hash lengths return Err(-1) before any change; - outputs with a non-prime-order epk are skipped; - the mempool thread survives a bad tx. Wallet format v9 is unchanged; no ABI or symbol change. Honest data takes the same path as before (an old-vs-new run over generated honest chains is byte-identical). Tests (each on its own thread under a 15 s watchdog): 0/51/52/53/580-byte ciphertexts in one block on the inline and deferred witness paths (the 51-byte notes are skipped, the 53- and 580-byte notes are found, the tree and every witness match the reference); a 31-byte tx hash, an empty block hash, a 31-byte prev hash and a 33-byte foreign tx hash each return Err(-1) with the txs lock usable and last_scanned_height, trees and witnesses unchanged; a mixed-order epk in scan_full_tx and scan_full_mempool_tx does not panic and decrypts nothing while the real epk still decrypts; a t-address job panicking for 1 of 3 addresses is an Err. The oracle generator gains short (0..=51-byte) and full (580-byte) ciphertext outputs without an extra random draw, so each seed keeps its sequence of blocks, values and keys. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2151 lines
91 KiB
Rust
2151 lines
91 KiB
Rust
// Copyright The Hush Developers 2019-2022
|
|
// Released under the GPLv3
|
|
use crate::lightwallet::LightWallet;
|
|
|
|
use std::borrow::Cow;
|
|
use std::sync::{Arc, RwLock, Mutex, mpsc::channel};
|
|
use std::sync::atomic::{AtomicBool, AtomicI32, AtomicUsize, Ordering};
|
|
use std::path::{Path, PathBuf};
|
|
use std::fs::File;
|
|
use std::collections::{HashSet, HashMap};
|
|
use std::cmp::{max, min};
|
|
use std::io;
|
|
use std::io::prelude::*;
|
|
use std::io::{BufReader, BufWriter, Error, ErrorKind};
|
|
use tokio::runtime::Runtime;
|
|
use tokio::time::{Duration};
|
|
|
|
use crate::grpc_client::RawTransaction;
|
|
|
|
use protobuf::parse_from_bytes;
|
|
|
|
use threadpool::ThreadPool;
|
|
|
|
use json::{object, array, JsonValue};
|
|
use zcash_primitives::transaction::{TxId, Transaction};
|
|
use zcash_client_backend::{constants::testnet, constants::mainnet, constants::regtest,};
|
|
|
|
use log::{info, warn, error, LevelFilter};
|
|
use log4rs::append::rolling_file::RollingFileAppender;
|
|
use log4rs::encode::pattern::PatternEncoder;
|
|
use log4rs::config::{Appender, Config, Root};
|
|
use log4rs::filter::threshold::ThresholdFilter;
|
|
use log4rs::append::rolling_file::policy::compound::{
|
|
CompoundPolicy,
|
|
trigger::size::SizeTrigger,
|
|
roll::fixed_window::FixedWindowRoller,
|
|
};
|
|
|
|
use crate::grpcconnector::{self, *};
|
|
|
|
|
|
use crate::ANCHOR_OFFSET;
|
|
|
|
mod checkpoints;
|
|
|
|
pub const DEFAULT_SERVER: &str = "https://lite.dragonx.is";
|
|
pub const WALLET_NAME: &str = "silentdragonxlite-wallet.dat";
|
|
pub const LOGFILE_NAME: &str = "silentdragonxlite-wallet.debug.log";
|
|
|
|
#[derive(Clone, Debug)]
|
|
pub struct WalletStatus {
|
|
pub is_syncing: bool,
|
|
pub total_blocks: u64,
|
|
pub synced_blocks: u64,
|
|
}
|
|
|
|
impl WalletStatus {
|
|
pub fn new() -> Self {
|
|
WalletStatus {
|
|
is_syncing: false,
|
|
total_blocks: 0,
|
|
synced_blocks: 0
|
|
}
|
|
}
|
|
}
|
|
|
|
#[derive(Clone, Debug)]
|
|
pub struct LightClientConfig {
|
|
pub server : http::Uri,
|
|
pub chain_name : String,
|
|
pub sapling_activation_height : u64,
|
|
pub consensus_branch_id : String,
|
|
pub anchor_offset : u32,
|
|
pub no_cert_verification : bool,
|
|
pub data_dir : Option<String>
|
|
}
|
|
|
|
impl LightClientConfig {
|
|
|
|
// Create an unconnected (to any server) config to test for local wallet etc...
|
|
pub fn create_unconnected(chain_name: String, dir: Option<String>) -> LightClientConfig {
|
|
LightClientConfig {
|
|
server : http::Uri::default(),
|
|
chain_name : chain_name,
|
|
sapling_activation_height : 0,
|
|
consensus_branch_id : "".to_string(),
|
|
anchor_offset : ANCHOR_OFFSET,
|
|
no_cert_verification : false,
|
|
data_dir : dir,
|
|
}
|
|
}
|
|
|
|
pub fn create(server: http::Uri, dangerous: bool) -> io::Result<(LightClientConfig, u64)> {
|
|
use std::net::ToSocketAddrs;
|
|
// Test for a connection first
|
|
format!("{}:{}", server.host().unwrap(), server.port().unwrap())
|
|
.to_socket_addrs()?
|
|
.next()
|
|
.ok_or(std::io::Error::new(ErrorKind::ConnectionRefused, "Couldn't resolve server!"))?;
|
|
|
|
// Do a getinfo first, before opening the wallet
|
|
let info = grpcconnector::get_info(&server, dangerous)
|
|
.map_err(|e| std::io::Error::new(ErrorKind::ConnectionRefused, e))?;
|
|
|
|
// Create a Light Client Config
|
|
let config = LightClientConfig {
|
|
server,
|
|
chain_name : info.chain_name,
|
|
sapling_activation_height : info.sapling_activation_height,
|
|
consensus_branch_id : info.consensus_branch_id,
|
|
anchor_offset : ANCHOR_OFFSET,
|
|
no_cert_verification : dangerous,
|
|
data_dir : None,
|
|
};
|
|
|
|
Ok((config, info.block_height))
|
|
}
|
|
|
|
|
|
/// Build the Logging config
|
|
pub fn get_log_config(&self) -> io::Result<Config> {
|
|
let window_size = 3; // log0, log1, log2
|
|
let fixed_window_roller =
|
|
FixedWindowRoller::builder().build("zecwallet-light-wallet-log{}",window_size).unwrap();
|
|
let size_limit = 5 * 1024 * 1024; // 5MB as max log file size to roll
|
|
let size_trigger = SizeTrigger::new(size_limit);
|
|
let compound_policy = CompoundPolicy::new(Box::new(size_trigger),Box::new(fixed_window_roller));
|
|
|
|
Config::builder()
|
|
.appender(
|
|
Appender::builder()
|
|
.filter(Box::new(ThresholdFilter::new(LevelFilter::Info)))
|
|
.build(
|
|
"logfile",
|
|
Box::new(
|
|
RollingFileAppender::builder()
|
|
.encoder(Box::new(PatternEncoder::new("{d} {l}::{m}{n}")))
|
|
.build(self.get_log_path(), Box::new(compound_policy))?,
|
|
),
|
|
),
|
|
)
|
|
.build(
|
|
Root::builder()
|
|
.appender("logfile")
|
|
.build(LevelFilter::Debug),
|
|
)
|
|
.map_err(|e|Error::new(ErrorKind::Other, format!("{}", e)))
|
|
}
|
|
|
|
pub fn get_zcash_data_path(&self) -> Box<Path> {
|
|
let mut zcash_data_location;
|
|
if self.data_dir.is_some() {
|
|
zcash_data_location = PathBuf::from(&self.data_dir.as_ref().unwrap());
|
|
} else {
|
|
if cfg!(target_os="macos") || cfg!(target_os="windows") {
|
|
zcash_data_location = dirs::data_dir().expect("Couldn't determine app data directory!");
|
|
zcash_data_location.push("silentdragonxlite");
|
|
} else {
|
|
zcash_data_location = dirs::home_dir().expect("Couldn't determine home directory!");
|
|
zcash_data_location.push(".silentdragonxlite");
|
|
};
|
|
|
|
match &self.chain_name[..] {
|
|
"main" => {},
|
|
"test" => zcash_data_location.push("testnet3"),
|
|
"regtest" => zcash_data_location.push("regtest"),
|
|
c => panic!("Unknown chain {}", c),
|
|
};
|
|
}
|
|
|
|
// Create directory if it doesn't exist
|
|
match std::fs::create_dir_all(zcash_data_location.clone()) {
|
|
Ok(_) => zcash_data_location.into_boxed_path(),
|
|
Err(e) => {
|
|
eprintln!("Couldn't create zcash directory!\n{}", e);
|
|
panic!("Couldn't create zcash directory!");
|
|
}
|
|
}
|
|
}
|
|
|
|
pub fn get_wallet_path(&self) -> Box<Path> {
|
|
let mut wallet_location = self.get_zcash_data_path().into_path_buf();
|
|
wallet_location.push(WALLET_NAME);
|
|
|
|
wallet_location.into_boxed_path()
|
|
}
|
|
|
|
pub fn wallet_exists(&self) -> bool {
|
|
return self.get_wallet_path().exists()
|
|
}
|
|
|
|
pub fn get_zcash_params_path(&self) -> io::Result<Box<Path>> {
|
|
let mut zcash_params = self.get_zcash_data_path().into_path_buf();
|
|
zcash_params.push("..");
|
|
if cfg!(target_os="macos") || cfg!(target_os="windows") {
|
|
zcash_params.push("ZcashParams");
|
|
} else {
|
|
zcash_params.push(".zcash-params");
|
|
}
|
|
|
|
match std::fs::create_dir_all(zcash_params.clone()) {
|
|
Ok(_) => Ok(zcash_params.into_boxed_path()),
|
|
Err(e) => {
|
|
eprintln!("Couldn't create zcash params directory\n{}", e);
|
|
Err(e)
|
|
}
|
|
}
|
|
}
|
|
|
|
pub fn get_log_path(&self) -> Box<Path> {
|
|
let mut log_path = self.get_zcash_data_path().into_path_buf();
|
|
log_path.push(LOGFILE_NAME);
|
|
|
|
log_path.into_boxed_path()
|
|
}
|
|
|
|
pub fn get_initial_state(&self, height: u64) -> Option<(u64, &str, &str)> {
|
|
checkpoints::get_closest_checkpoint(&self.chain_name, height)
|
|
}
|
|
|
|
pub fn get_server_or_default(server: Option<String>) -> http::Uri {
|
|
match server {
|
|
Some(s) => {
|
|
let mut s = if s.starts_with("http") {s} else { "http://".to_string() + &s};
|
|
let uri: http::Uri = s.parse().unwrap();
|
|
if uri.port().is_none() {
|
|
s = s + ":443";
|
|
}
|
|
s
|
|
}
|
|
None => DEFAULT_SERVER.to_string()
|
|
}.parse().unwrap()
|
|
}
|
|
|
|
pub fn get_coin_type(&self) -> u32 {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::COIN_TYPE,
|
|
"test" => testnet::COIN_TYPE,
|
|
"regtest" => regtest::COIN_TYPE,
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
pub fn hrp_sapling_address(&self) -> &str {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::HRP_SAPLING_PAYMENT_ADDRESS,
|
|
"test" => testnet::HRP_SAPLING_PAYMENT_ADDRESS,
|
|
"regtest" => regtest::HRP_SAPLING_PAYMENT_ADDRESS,
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
pub fn hrp_sapling_private_key(&self) -> &str {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::HRP_SAPLING_EXTENDED_SPENDING_KEY,
|
|
"test" => testnet::HRP_SAPLING_EXTENDED_SPENDING_KEY,
|
|
"regtest" => regtest::HRP_SAPLING_EXTENDED_SPENDING_KEY,
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
pub fn hrp_sapling_viewing_key(&self) -> &str {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::HRP_SAPLING_EXTENDED_FULL_VIEWING_KEY,
|
|
"test" => testnet::HRP_SAPLING_EXTENDED_FULL_VIEWING_KEY,
|
|
"regtest" => regtest::HRP_SAPLING_EXTENDED_FULL_VIEWING_KEY,
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
pub fn base58_pubkey_address(&self) -> [u8; 1] {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::B58_PUBKEY_ADDRESS_PREFIX,
|
|
|
|
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
|
|
pub fn base58_script_address(&self) -> [u8; 1] {
|
|
match &self.chain_name[..] {
|
|
"main" => mainnet::B58_SCRIPT_ADDRESS_PREFIX,
|
|
|
|
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
|
|
pub fn base58_secretkey_prefix(&self) -> [u8; 1] {
|
|
match &self.chain_name[..] {
|
|
"main" => [0xBC],
|
|
"test" => [0xEF],
|
|
"regtest" => [0xEF],
|
|
c => panic!("Unknown chain {}", c)
|
|
}
|
|
}
|
|
}
|
|
|
|
pub struct LightClient {
|
|
pub wallet : Arc<RwLock<LightWallet>>,
|
|
|
|
pub config : LightClientConfig,
|
|
|
|
// zcash-params
|
|
pub sapling_output : Cow<'static, [u8]>,
|
|
pub sapling_spend : Cow<'static, [u8]>,
|
|
|
|
sync_lock : Mutex<()>,
|
|
sync_status : Arc<RwLock<WalletStatus>>, // The current syncing status of the Wallet.
|
|
pub shutdown_flag : Arc<AtomicBool>, // Signal mempool threads to stop
|
|
}
|
|
|
|
impl LightClient {
|
|
|
|
pub fn set_wallet_initial_state(&self, height: u64) {
|
|
use std::convert::TryInto;
|
|
|
|
let state = self.config.get_initial_state(height);
|
|
|
|
match state {
|
|
Some((height, hash, tree)) => self.wallet.read().unwrap().set_initial_block(height.try_into().unwrap(), hash, tree),
|
|
_ => true,
|
|
};
|
|
}
|
|
|
|
fn write_file_if_not_exists(dir: &Box<Path>, name: &str, bytes: &[u8]) -> io::Result<()> {
|
|
let mut file_path = dir.to_path_buf();
|
|
file_path.push(name);
|
|
if !file_path.exists() {
|
|
let mut file = File::create(&file_path)?;
|
|
file.write_all(bytes)?;
|
|
}
|
|
|
|
Ok(())
|
|
}
|
|
|
|
#[cfg(feature = "embed_params")]
|
|
fn read_sapling_params(&mut self) {
|
|
// Read Sapling Params
|
|
use crate::SaplingParams;
|
|
self.sapling_output = SaplingParams::get("sapling-output.params").unwrap();
|
|
self.sapling_spend = SaplingParams::get("sapling-spend.params").unwrap();
|
|
}
|
|
pub fn set_sapling_params(&mut self, sapling_output: &[u8], sapling_spend: &[u8]) -> Result<(), String> {
|
|
use sha2::{Sha256, Digest};
|
|
// The hashes of the params need to match
|
|
const SAPLING_OUTPUT_HASH: &str = "2f0ebbcbb9bb0bcffe95a397e7eba89c29eb4dde6191c339db88570e3f3fb0e4";
|
|
const SAPLING_SPEND_HASH: &str = "8e48ffd23abb3a5fd9c5589204f32d9c31285a04b78096ba40a79b75677efc13";
|
|
if SAPLING_OUTPUT_HASH.to_string() != hex::encode(Sha256::digest(&sapling_output)) {
|
|
return Err(format!("sapling-output hash didn't match. expected {}, found {}", SAPLING_OUTPUT_HASH, hex::encode(Sha256::digest(&sapling_output)) ))
|
|
}
|
|
if SAPLING_SPEND_HASH.to_string() != hex::encode(Sha256::digest(&sapling_spend)) {
|
|
return Err(format!("sapling-spend hash didn't match. expected {}, found {}", SAPLING_SPEND_HASH, hex::encode(Sha256::digest(&sapling_spend)) ))
|
|
}
|
|
// Will not overwrite previous params
|
|
if self.sapling_output.is_empty() {
|
|
self.sapling_output = Cow::Owned(sapling_output.to_vec());
|
|
}
|
|
if self.sapling_spend.is_empty() {
|
|
self.sapling_spend = Cow::Owned(sapling_spend.to_vec());
|
|
}
|
|
|
|
// Ensure that the sapling params are stored on disk properly as well.
|
|
match self.config.get_zcash_params_path() {
|
|
Ok(zcash_params_dir) => {
|
|
// Create the sapling output and spend params files
|
|
match LightClient::write_file_if_not_exists(&zcash_params_dir, "sapling-output.params", &self.sapling_output) {
|
|
Ok(_) => {},
|
|
Err(e) => eprintln!("Warning: Couldn't write the output params!\n{}", e)
|
|
};
|
|
|
|
match LightClient::write_file_if_not_exists(&zcash_params_dir, "sapling-spend.params", &self.sapling_spend) {
|
|
Ok(_) => {},
|
|
Err(e) => eprintln!("Warning: Couldn't write the output params!\n{}", e)
|
|
}
|
|
},
|
|
Err(e) => {
|
|
eprintln!("{}", e);
|
|
}
|
|
};
|
|
|
|
Ok(())
|
|
}
|
|
|
|
/// Method to create a test-only version of the LightClient
|
|
#[allow(dead_code)]
|
|
pub fn unconnected(seed_phrase: String, dir: Option<String>) -> io::Result<Self> {
|
|
let config = LightClientConfig::create_unconnected("test".to_string(), dir);
|
|
let mut l = LightClient {
|
|
wallet : Arc::new(RwLock::new(LightWallet::new(Some(seed_phrase), &config, 0,0 )?)),
|
|
config : config.clone(),
|
|
sapling_output : Cow::Borrowed(&[]),
|
|
sapling_spend : Cow::Borrowed(&[]),
|
|
sync_lock : Mutex::new(()),
|
|
sync_status : Arc::new(RwLock::new(WalletStatus::new())),
|
|
shutdown_flag : Arc::new(AtomicBool::new(false)),
|
|
};
|
|
|
|
l.set_wallet_initial_state(0);
|
|
|
|
#[cfg(feature = "embed_params")]
|
|
l.read_sapling_params();
|
|
|
|
info!("Created new wallet!");
|
|
info!("Created LightClient to {}", &config.server);
|
|
|
|
Ok(l)
|
|
}
|
|
|
|
/// Create a brand new wallet with a new seed phrase. Will fail if a wallet file
|
|
/// already exists on disk
|
|
pub fn new(config: &LightClientConfig, latest_block: u64) -> io::Result<Self> {
|
|
if config.wallet_exists() {
|
|
return Err(Error::new(ErrorKind::AlreadyExists,
|
|
"Cannot create a new wallet from seed, because a wallet already exists"));
|
|
}
|
|
|
|
let mut l = LightClient {
|
|
wallet : Arc::new(RwLock::new(LightWallet::new(None, config, latest_block, 0)?)),
|
|
config : config.clone(),
|
|
sapling_output : Cow::Borrowed(&[]),
|
|
sapling_spend : Cow::Borrowed(&[]),
|
|
sync_lock : Mutex::new(()),
|
|
sync_status : Arc::new(RwLock::new(WalletStatus::new())),
|
|
shutdown_flag : Arc::new(AtomicBool::new(false)),
|
|
};
|
|
|
|
l.set_wallet_initial_state(latest_block);
|
|
|
|
#[cfg(feature = "embed_params")]
|
|
l.read_sapling_params();
|
|
|
|
info!("Created new wallet with a new seed!");
|
|
info!("Created LightClient to {}", &config.server);
|
|
l.do_save().map_err(|s| io::Error::new(ErrorKind::PermissionDenied, s))?;
|
|
|
|
Ok(l)
|
|
}
|
|
|
|
pub fn new_from_phrase(seed_phrase: String, config: &LightClientConfig, birthday: u64,number: u64, overwrite: bool) -> io::Result<Self> {
|
|
if !overwrite && config.wallet_exists() {
|
|
return Err(Error::new(ErrorKind::AlreadyExists,
|
|
"Cannot create a new wallet from seed, because a wallet already exists"));
|
|
}
|
|
|
|
let mut l = LightClient {
|
|
wallet : Arc::new(RwLock::new(LightWallet::new(Some(seed_phrase), config, birthday, number)?)),
|
|
config : config.clone(),
|
|
sapling_output : Cow::Borrowed(&[]),
|
|
sapling_spend : Cow::Borrowed(&[]),
|
|
sync_lock : Mutex::new(()),
|
|
sync_status : Arc::new(RwLock::new(WalletStatus::new())),
|
|
shutdown_flag : Arc::new(AtomicBool::new(false)),
|
|
};
|
|
|
|
// println!("Setting birthday to {}", birthday);
|
|
l.set_wallet_initial_state(birthday);
|
|
#[cfg(feature = "embed_params")]
|
|
l.read_sapling_params();
|
|
|
|
|
|
info!("Created new wallet!");
|
|
info!("Created LightClient to {}", &config.server);
|
|
l.do_save().map_err(|s| io::Error::new(ErrorKind::PermissionDenied, s))?;
|
|
|
|
Ok(l)
|
|
}
|
|
|
|
pub fn read_from_disk(config: &LightClientConfig) -> io::Result<Self> {
|
|
if !config.wallet_exists() {
|
|
// Try to recover from backup
|
|
let bak_path = config.get_wallet_path().with_extension("dat.bak");
|
|
if bak_path.exists() {
|
|
warn!("Wallet file missing but backup found, attempting recovery from {:?}", bak_path);
|
|
std::fs::copy(&bak_path, config.get_wallet_path())?;
|
|
info!("Wallet recovered from backup");
|
|
} else {
|
|
return Err(Error::new(ErrorKind::AlreadyExists,
|
|
format!("Cannot read wallet. No file at {}", config.get_wallet_path().display())));
|
|
}
|
|
}
|
|
|
|
// Try to open the wallet file; if it fails (corrupted/truncated), try the backup
|
|
let wallet = match File::open(config.get_wallet_path())
|
|
.and_then(|f| {
|
|
let mut file_buffer = BufReader::new(f);
|
|
LightWallet::read(&mut file_buffer, config)
|
|
}) {
|
|
Ok(w) => w,
|
|
Err(e) => {
|
|
warn!("Failed to read wallet file: {}, trying backup", e);
|
|
let bak_path = config.get_wallet_path().with_extension("dat.bak");
|
|
if bak_path.exists() {
|
|
std::fs::copy(&bak_path, config.get_wallet_path())?;
|
|
let mut file_buffer = BufReader::new(File::open(config.get_wallet_path())?);
|
|
LightWallet::read(&mut file_buffer, config)?
|
|
} else {
|
|
return Err(e);
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut lc = LightClient {
|
|
wallet : Arc::new(RwLock::new(wallet)),
|
|
config : config.clone(),
|
|
sapling_output : Cow::Borrowed(&[]),
|
|
sapling_spend : Cow::Borrowed(&[]),
|
|
sync_lock : Mutex::new(()),
|
|
sync_status : Arc::new(RwLock::new(WalletStatus::new())),
|
|
shutdown_flag : Arc::new(AtomicBool::new(false)),
|
|
};
|
|
|
|
#[cfg(feature = "embed_params")]
|
|
lc.read_sapling_params();
|
|
|
|
info!("Read wallet with birthday {}", lc.wallet.read().unwrap().get_first_tx_block());
|
|
info!("Created LightClient to {}", &config.server);
|
|
|
|
Ok(lc)
|
|
}
|
|
|
|
pub fn init_logging(&self) -> io::Result<()> {
|
|
// Configure logging first.
|
|
let log_config = self.config.get_log_config()?;
|
|
log4rs::init_config(log_config).map_err(|e| {
|
|
std::io::Error::new(ErrorKind::Other, e)
|
|
})?;
|
|
|
|
Ok(())
|
|
}
|
|
|
|
pub fn attempt_recover_seed(config: &LightClientConfig, password: Option<String>) -> Result<String, String> {
|
|
use std::io::prelude::*;
|
|
use byteorder::{LittleEndian, ReadBytesExt};
|
|
use libflate::gzip::Decoder;
|
|
use bip39::{Mnemonic, Language};
|
|
use zcash_primitives::serialize::Vector;
|
|
|
|
let mut inp = BufReader::new(File::open(config.get_wallet_path()).unwrap());
|
|
let version = inp.read_u64::<LittleEndian>().unwrap();
|
|
println!("Reading wallet version {}", version);
|
|
|
|
// At version 5, we're writing the rest of the file as a compressed stream (gzip)
|
|
let mut reader: Box<dyn Read> = if version != 5 {
|
|
Box::new(inp)
|
|
} else {
|
|
Box::new(Decoder::new(inp).unwrap())
|
|
};
|
|
|
|
let encrypted = if version >= 4 {
|
|
reader.read_u8().unwrap() > 0
|
|
} else {
|
|
false
|
|
};
|
|
|
|
if encrypted && password.is_none() {
|
|
return Err("The wallet is encrypted and a password was not specified. Please specify the password with '--password'!".to_string());
|
|
}
|
|
|
|
let mut enc_seed = [0u8; 48];
|
|
if version >= 4 {
|
|
reader.read_exact(&mut enc_seed).unwrap();
|
|
}
|
|
|
|
let nonce = if version >= 4 {
|
|
Vector::read(&mut reader, |r| r.read_u8()).unwrap()
|
|
} else {
|
|
vec![]
|
|
};
|
|
|
|
let phrase = if encrypted {
|
|
use sodiumoxide::crypto::secretbox;
|
|
use crate::lightwallet::double_sha256;
|
|
|
|
// Get the doublesha256 of the password, which is the right length
|
|
let key = secretbox::Key::from_slice(&double_sha256(password.unwrap().as_bytes())).unwrap();
|
|
let nonce = secretbox::Nonce::from_slice(&nonce).unwrap();
|
|
|
|
let seed = match secretbox::open(&enc_seed, &nonce, &key) {
|
|
Ok(s) => s,
|
|
Err(_) => return Err("Decryption failed. Is your password correct?".to_string())
|
|
};
|
|
|
|
Mnemonic::from_entropy(&seed, Language::English)
|
|
} else {
|
|
// Seed
|
|
let mut seed_bytes = [0u8; 32];
|
|
reader.read_exact(&mut seed_bytes).unwrap();
|
|
|
|
Mnemonic::from_entropy(&seed_bytes, Language::English)
|
|
}.map_err(|e| format!("Failed to read seed. {:?}", e));
|
|
|
|
phrase.map(|m| m.phrase().to_string())
|
|
}
|
|
|
|
|
|
pub fn last_scanned_height(&self) -> u64 {
|
|
self.wallet.read().unwrap().last_scanned_height() as u64
|
|
}
|
|
|
|
// Export private keys
|
|
pub fn do_export(&self, addr: Option<String>) -> Result<JsonValue, &str> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked");
|
|
}
|
|
|
|
// Clone address so it can be moved into the closure
|
|
let address = addr.clone();
|
|
let wallet = self.wallet.read().unwrap();
|
|
// Go over all z addresses
|
|
let z_keys = wallet.get_z_private_keys().iter()
|
|
.filter( move |(addr, _, _)| address.is_none() || address.as_ref() == Some(addr))
|
|
.map( |(addr, pk, vk)|
|
|
object!{
|
|
"address" => addr.clone(),
|
|
"private_key" => pk.clone(),
|
|
"viewing_key" => vk.clone(),
|
|
}
|
|
).collect::<Vec<JsonValue>>();
|
|
|
|
// Clone address so it can be moved into the closure
|
|
let address = addr.clone();
|
|
|
|
// Go over all t addresses
|
|
let t_keys = wallet.get_t_secret_keys().iter()
|
|
.filter( move |(addr, _)| address.is_none() || address.as_ref() == Some(addr))
|
|
.map( |(addr, sk)|
|
|
object!{
|
|
"address" => addr.clone(),
|
|
"private_key" => sk.clone(),
|
|
}
|
|
).collect::<Vec<JsonValue>>();
|
|
|
|
let mut all_keys = vec![];
|
|
all_keys.extend_from_slice(&z_keys);
|
|
all_keys.extend_from_slice(&t_keys);
|
|
|
|
Ok(all_keys.into())
|
|
}
|
|
|
|
pub fn do_address(&self) -> JsonValue {
|
|
let wallet = self.wallet.read().unwrap();
|
|
|
|
// Collect z addresses
|
|
let z_addresses = wallet.get_all_zaddresses();
|
|
|
|
// Collect t addresses
|
|
let t_addresses = wallet.get_all_taddresses().iter().map( |a| a.clone() )
|
|
.collect::<Vec<String>>();
|
|
|
|
object!{
|
|
"z_addresses" => z_addresses,
|
|
"t_addresses" => t_addresses,
|
|
}
|
|
}
|
|
|
|
pub fn do_balance(&self) -> JsonValue {
|
|
let wallet = self.wallet.read().unwrap();
|
|
|
|
// Collect z addresses
|
|
let z_addresses = wallet.z_balances_by_address().into_iter()
|
|
.map(|(address, zbalance, unconfirmed, verified_zbalance, spendable_zbalance)| {
|
|
object!{
|
|
"address" => address,
|
|
"zbalance" => zbalance,
|
|
"unconfirmed" => unconfirmed,
|
|
"verified_zbalance" => verified_zbalance,
|
|
"spendable_zbalance" => spendable_zbalance
|
|
}
|
|
}).collect::<Vec<JsonValue>>();
|
|
|
|
// Collect t addresses
|
|
let t_addresses = wallet.get_all_taddresses().iter().map( |address| {
|
|
// Get the balance for this address
|
|
let balance = wallet.tbalance(Some(address.clone())) ;
|
|
|
|
object!{
|
|
"address" => address.clone(),
|
|
"balance" => balance,
|
|
}
|
|
}).collect::<Vec<JsonValue>>();
|
|
|
|
object!{
|
|
"zbalance" => wallet.zbalance(None),
|
|
"unconfirmed" => wallet.unconfirmed_zbalance(None),
|
|
"verified_zbalance" => wallet.verified_zbalance(None),
|
|
"spendable_zbalance" => wallet.spendable_zbalance(None),
|
|
"tbalance" => wallet.tbalance(None),
|
|
"z_addresses" => z_addresses,
|
|
"t_addresses" => t_addresses,
|
|
}
|
|
}
|
|
|
|
pub fn do_save(&self) -> Result<(), String> {
|
|
// If the wallet is encrypted but unlocked, lock it again.
|
|
{
|
|
let mut wallet = self.wallet.write().unwrap();
|
|
if wallet.is_encrypted() && wallet.is_unlocked_for_spending() {
|
|
match wallet.lock() {
|
|
Ok(_) => {},
|
|
Err(e) => {
|
|
let err = format!("ERR: {}", e);
|
|
error!("{}", err);
|
|
return Err(e.to_string());
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
let r;
|
|
{
|
|
// Prevent any overlapping syncs during save, and don't save in the middle of a sync
|
|
let _lock = self.sync_lock.lock().unwrap();
|
|
|
|
let wallet_path = self.config.get_wallet_path();
|
|
let tmp_path = wallet_path.with_extension("dat.tmp");
|
|
let bak_path = wallet_path.with_extension("dat.bak");
|
|
|
|
// Write to a temporary file first (atomic save)
|
|
let wallet = self.wallet.write().unwrap();
|
|
let mut file_buffer = BufWriter::with_capacity(
|
|
1_000_000, // 1 MB write buffer
|
|
File::create(&tmp_path).map_err(|e| format!("Failed to create temp file: {}", e))?);
|
|
|
|
r = match wallet.write(&mut file_buffer) {
|
|
Ok(_) => Ok(()),
|
|
Err(e) => {
|
|
let err = format!("ERR: {}", e);
|
|
error!("{}", err);
|
|
// Clean up temp file on write failure
|
|
let _ = std::fs::remove_file(&tmp_path);
|
|
Err(e.to_string())
|
|
}
|
|
};
|
|
|
|
file_buffer.flush().map_err(|e| {
|
|
let _ = std::fs::remove_file(&tmp_path);
|
|
format!("{}", e)
|
|
})?;
|
|
|
|
// Only proceed with rename if the write succeeded
|
|
if r.is_ok() {
|
|
// Create backup of existing wallet (if it exists)
|
|
if wallet_path.exists() {
|
|
if let Err(e) = std::fs::copy(&wallet_path, &bak_path) {
|
|
warn!("Failed to create wallet backup: {}", e);
|
|
// Non-fatal: continue with the save
|
|
}
|
|
}
|
|
|
|
// Atomically replace the wallet file with the new one
|
|
if let Err(e) = std::fs::rename(&tmp_path, &wallet_path) {
|
|
error!("Failed to rename temp wallet file: {}", e);
|
|
// Try direct copy as fallback (rename can fail across filesystems)
|
|
if let Err(e2) = std::fs::copy(&tmp_path, &wallet_path) {
|
|
let _ = std::fs::remove_file(&tmp_path);
|
|
return Err(format!("Failed to save wallet: {} / {}", e, e2));
|
|
}
|
|
let _ = std::fs::remove_file(&tmp_path);
|
|
}
|
|
}
|
|
}
|
|
|
|
r
|
|
}
|
|
|
|
pub fn get_server_uri(&self) -> http::Uri {
|
|
self.config.server.clone()
|
|
}
|
|
|
|
// DEBUG: dump the wallet's latest Sapling commitment tree so it can be diffed against the
|
|
// node's `getblockmerkletree <height>` to localize a tree/anchor divergence.
|
|
pub fn do_sapling_tree(&self) -> JsonValue {
|
|
match self.wallet.read().unwrap().get_sapling_tree() {
|
|
Ok((height, hash, tree)) => object!{
|
|
"height" => height,
|
|
"hash" => hash,
|
|
"tree" => tree,
|
|
"anchor_offset" => self.config.anchor_offset,
|
|
},
|
|
Err(e) => object!{ "error" => e },
|
|
}
|
|
}
|
|
|
|
pub fn do_info(&self) -> String {
|
|
match get_info(&self.get_server_uri(), self.config.no_cert_verification) {
|
|
Ok(i) => {
|
|
let o = object!{
|
|
"version" => i.version,
|
|
"vendor" => i.vendor,
|
|
"taddr_support" => i.taddr_support,
|
|
"chain_name" => i.chain_name,
|
|
"sapling_activation_height" => i.sapling_activation_height,
|
|
"consensus_branch_id" => i.consensus_branch_id,
|
|
"latest_block_height" => i.block_height,
|
|
"difficulty" => i.difficulty,
|
|
"longestchain" => i.longestchain,
|
|
"notarized" => i.notarized,
|
|
};
|
|
o.pretty(2)
|
|
},
|
|
Err(e) => e
|
|
}
|
|
}
|
|
|
|
pub fn do_coinsupply(&self) -> String {
|
|
match get_coinsupply(self.get_server_uri(), self.config.no_cert_verification) {
|
|
Ok(i) => {
|
|
let o = object!{
|
|
"result" => i.result,
|
|
"coin" => i.coin,
|
|
"height" => i.height,
|
|
"supply" => i.supply,
|
|
"zfunds" => i.zfunds,
|
|
"total" => i.total,
|
|
|
|
};
|
|
o.pretty(2)
|
|
},
|
|
Err(e) => e
|
|
}
|
|
}
|
|
|
|
pub fn do_seed_phrase(&self) -> Result<JsonValue, &str> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked");
|
|
}
|
|
|
|
let wallet = self.wallet.read().unwrap();
|
|
Ok(object!{
|
|
"seed" => wallet.get_seed_phrase(),
|
|
"birthday" => wallet.get_birthday()
|
|
})
|
|
}
|
|
|
|
// Return a list of all notes, spent and unspent
|
|
pub fn do_list_notes(&self, all_notes: bool) -> JsonValue {
|
|
let mut unspent_notes: Vec<JsonValue> = vec![];
|
|
let mut spent_notes : Vec<JsonValue> = vec![];
|
|
let mut pending_notes: Vec<JsonValue> = vec![];
|
|
|
|
let anchor_height: i32 = self.wallet.read().unwrap().get_anchor_height() as i32;
|
|
|
|
{
|
|
|
|
let wallet = self.wallet.read().unwrap();
|
|
|
|
// First, collect all extfvk's that are spendable (i.e., we have the private key)
|
|
let spendable_address_set: HashSet<String> = wallet.spendable_zaddress_set();
|
|
let spendable_address: &HashSet<String> = &spendable_address_set;
|
|
|
|
// Collect Sapling notes
|
|
wallet.txs.read().unwrap().iter()
|
|
.flat_map( |(txid, wtx)| {
|
|
let spendable_address: &HashSet<String> = spendable_address;
|
|
wtx.notes.iter().filter_map(move |nd|
|
|
if !all_notes && nd.spent.is_some() {
|
|
None
|
|
} else {
|
|
|
|
let address = LightWallet::note_address(self.config.hrp_sapling_address(), nd);
|
|
let spendable = address.is_some() &&
|
|
spendable_address.contains(&address.clone().unwrap()) &&
|
|
wtx.block <= anchor_height && nd.spent.is_none() && nd.unconfirmed_spent.is_none();
|
|
Some(object!{
|
|
"created_in_block" => wtx.block,
|
|
"datetime" => wtx.datetime,
|
|
"created_in_txid" => format!("{}", txid),
|
|
"value" => nd.note.value,
|
|
"is_change" => nd.is_change,
|
|
"address" => address,
|
|
"spendable" => spendable,
|
|
"spent" => nd.spent.map(|spent_txid| format!("{}", spent_txid)),
|
|
"unconfirmed_spent" => nd.unconfirmed_spent.map(|spent_txid| format!("{}", spent_txid)),
|
|
})
|
|
}
|
|
)
|
|
})
|
|
.for_each( |note| {
|
|
if note["spent"].is_null() && note["unconfirmed_spent"].is_null() {
|
|
unspent_notes.push(note);
|
|
} else if !note["spent"].is_null() {
|
|
spent_notes.push(note);
|
|
} else {
|
|
pending_notes.push(note);
|
|
}
|
|
});
|
|
}
|
|
|
|
let mut unspent_utxos: Vec<JsonValue> = vec![];
|
|
let mut spent_utxos : Vec<JsonValue> = vec![];
|
|
let mut pending_utxos: Vec<JsonValue> = vec![];
|
|
|
|
{
|
|
let wallet = self.wallet.read().unwrap();
|
|
wallet.txs.read().unwrap().iter()
|
|
.flat_map( |(txid, wtx)| {
|
|
wtx.utxos.iter().filter_map(move |utxo|
|
|
if !all_notes && utxo.spent.is_some() {
|
|
None
|
|
} else {
|
|
Some(object!{
|
|
"created_in_block" => wtx.block,
|
|
"datetime" => wtx.datetime,
|
|
"created_in_txid" => format!("{}", txid),
|
|
"value" => utxo.value,
|
|
"scriptkey" => hex::encode(utxo.script.clone()),
|
|
"is_change" => false, // TODO: Identify notes as change if we send change to taddrs
|
|
"address" => utxo.address.clone(),
|
|
"spent" => utxo.spent.map(|spent_txid| format!("{}", spent_txid)),
|
|
"unconfirmed_spent" => utxo.unconfirmed_spent.map(|spent_txid| format!("{}", spent_txid)),
|
|
})
|
|
}
|
|
)
|
|
})
|
|
.for_each( |utxo| {
|
|
if utxo["spent"].is_null() && utxo["unconfirmed_spent"].is_null() {
|
|
unspent_utxos.push(utxo);
|
|
} else if !utxo["spent"].is_null() {
|
|
spent_utxos.push(utxo);
|
|
} else {
|
|
pending_utxos.push(utxo);
|
|
}
|
|
});
|
|
}
|
|
|
|
let mut res = object!{
|
|
"unspent_notes" => unspent_notes,
|
|
"pending_notes" => pending_notes,
|
|
"utxos" => unspent_utxos,
|
|
"pending_utxos" => pending_utxos,
|
|
};
|
|
|
|
if all_notes {
|
|
res["spent_notes"] = JsonValue::Array(spent_notes);
|
|
res["spent_utxos"] = JsonValue::Array(spent_utxos);
|
|
}
|
|
|
|
res
|
|
}
|
|
|
|
pub fn do_encryption_status(&self) -> JsonValue {
|
|
let wallet = self.wallet.read().unwrap();
|
|
object!{
|
|
"encrypted" => wallet.is_encrypted(),
|
|
"locked" => !wallet.is_unlocked_for_spending()
|
|
}
|
|
}
|
|
|
|
pub fn do_list_transactions(&self) -> JsonValue {
|
|
let wallet = self.wallet.read().unwrap();
|
|
|
|
// Create a list of TransactionItems from wallet txns
|
|
let mut tx_list = wallet.txs.read().unwrap().iter()
|
|
.flat_map(| (_k, v) | {
|
|
let mut txns: Vec<JsonValue> = vec![];
|
|
|
|
if v.total_shielded_value_spent + v.total_transparent_value_spent > 0 {
|
|
// If money was spent, create a transaction. For this, we'll subtract
|
|
// all the change notes. TODO: Add transparent change here to subtract it also
|
|
let total_change: u64 = v.notes.iter()
|
|
.filter( |nd| nd.is_change )
|
|
.map( |nd| nd.note.value )
|
|
.sum();
|
|
|
|
// TODO: What happens if change is > than sent ?
|
|
|
|
// Collect outgoing metadata
|
|
let outgoing_json = v.outgoing_metadata.iter()
|
|
.map(|om|
|
|
object!{
|
|
"address" => om.address.clone(),
|
|
"value" => om.value,
|
|
"memo" => LightWallet::memo_str(&Some(om.memo.clone())),
|
|
})
|
|
.collect::<Vec<JsonValue>>();
|
|
|
|
txns.push(object! {
|
|
"block_height" => v.block,
|
|
"datetime" => v.datetime,
|
|
"txid" => format!("{}", v.txid),
|
|
"amount" => total_change as i64
|
|
- v.total_shielded_value_spent as i64
|
|
- v.total_transparent_value_spent as i64,
|
|
"outgoing_metadata" => outgoing_json,
|
|
});
|
|
}
|
|
|
|
// For each sapling note that is not a change, add a Tx.
|
|
txns.extend(v.notes.iter()
|
|
.filter( |nd| !nd.is_change )
|
|
.enumerate()
|
|
.map ( |(i, nd)|
|
|
object! {
|
|
"block_height" => v.block,
|
|
"datetime" => v.datetime,
|
|
"position" => i,
|
|
"txid" => format!("{}", v.txid),
|
|
"amount" => nd.note.value as i64,
|
|
"address" => LightWallet::note_address(self.config.hrp_sapling_address(), nd),
|
|
"memo" => LightWallet::memo_str(&nd.memo),
|
|
})
|
|
);
|
|
|
|
// Get the total transparent received
|
|
let total_transparent_received = v.utxos.iter().map(|u| u.value).sum::<u64>();
|
|
if total_transparent_received > v.total_transparent_value_spent {
|
|
// Create an input transaction for the transparent value as well.
|
|
txns.push(object!{
|
|
"block_height" => v.block,
|
|
"datetime" => v.datetime,
|
|
"txid" => format!("{}", v.txid),
|
|
"amount" => total_transparent_received as i64 - v.total_transparent_value_spent as i64,
|
|
"address" => v.utxos.iter().map(|u| u.address.clone()).collect::<Vec<String>>().join(","),
|
|
"memo" => None::<String>
|
|
})
|
|
}
|
|
|
|
txns
|
|
})
|
|
.collect::<Vec<JsonValue>>();
|
|
|
|
// Add the incoming Mempool - incoming_mempool flag is atm useless, but we can use that in future maybe
|
|
tx_list.extend(
|
|
wallet.incoming_mempool_txs.read().unwrap().iter().flat_map(|(_, wtxs)| {
|
|
wtxs.iter().flat_map(|wtx| {
|
|
wtx.incoming_metadata.iter()
|
|
.enumerate()
|
|
.map(move |(i, om)|
|
|
object! {
|
|
"block_height" => wtx.block.clone(),
|
|
"datetime" => wtx.datetime.clone(),
|
|
"position" => i,
|
|
"txid" => format!("{}", wtx.txid),
|
|
"amount" => om.value as i64,
|
|
"address" => om.address.clone(),
|
|
"memo" => LightWallet::memo_str(&Some(om.memo.clone())),
|
|
"unconfirmed" => true,
|
|
"incoming_mempool" => true,
|
|
}
|
|
)
|
|
})
|
|
})
|
|
);
|
|
|
|
// Add in all mempool txns
|
|
tx_list.extend(wallet.mempool_txs.read().unwrap().iter().map( |(_, wtx)| {
|
|
use zcash_primitives::transaction::components::amount::DEFAULT_FEE;
|
|
use std::convert::TryInto;
|
|
|
|
let amount: u64 = wtx.outgoing_metadata.iter().map(|om| om.value).sum::<u64>();
|
|
let fee: u64 = DEFAULT_FEE.try_into().unwrap();
|
|
|
|
// Collect outgoing metadata
|
|
let outgoing_json = wtx.outgoing_metadata.iter()
|
|
.map(|om|
|
|
object!{
|
|
"address" => om.address.clone(),
|
|
"value" => om.value,
|
|
"memo" => LightWallet::memo_str(&Some(om.memo.clone())),
|
|
|
|
}).collect::<Vec<JsonValue>>();
|
|
|
|
object! {
|
|
"block_height" => wtx.block,
|
|
"datetime" => wtx.datetime,
|
|
"txid" => format!("{}", wtx.txid),
|
|
"amount" => -1 * (fee + amount) as i64,
|
|
"unconfirmed" => true,
|
|
"outgoing_metadata" => outgoing_json,
|
|
}
|
|
}));
|
|
|
|
tx_list.sort_by( |a, b| if a["block_height"] == b["block_height"] {
|
|
a["txid"].as_str().cmp(&b["txid"].as_str())
|
|
} else {
|
|
a["block_height"].as_i32().cmp(&b["block_height"].as_i32())
|
|
}
|
|
);
|
|
|
|
JsonValue::Array(tx_list)
|
|
}
|
|
|
|
/// Create a new address, deriving it from the seed.
|
|
pub fn do_new_address(&self, addr_type: &str) -> Result<JsonValue, String> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked".to_string());
|
|
}
|
|
|
|
let new_address = {
|
|
let wallet = self.wallet.write().unwrap();
|
|
|
|
let addr = match addr_type {
|
|
"zs" => wallet.add_zaddr(),
|
|
"R" => wallet.add_taddr(),
|
|
_ => {
|
|
let e = format!("Unrecognized address type: {}", addr_type);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
};
|
|
|
|
if addr.starts_with("Error") {
|
|
let e = format!("Error creating new address: {}", addr);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
|
|
addr
|
|
};
|
|
|
|
self.do_save()?;
|
|
|
|
Ok(array![new_address])
|
|
}
|
|
|
|
/// Import a new private key
|
|
pub fn do_import_tk(&self, sk: String, birthday: u64) -> Result<JsonValue, String> {
|
|
// Checked before "locked": unlocking would not help (s1-D1). No "Error: " prefix here; the console
|
|
// import/timport commands add it.
|
|
if self.wallet.read().unwrap().is_encrypted() {
|
|
let e = "Can't import a private key while the wallet is encrypted - remove encryption, import, then encrypt again".to_string();
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked".to_string());
|
|
}
|
|
|
|
let new_address = {
|
|
let mut wallet = self.wallet.write().unwrap();
|
|
|
|
let addr = wallet.import_taddr(sk, birthday);
|
|
if addr.starts_with("Error") {
|
|
let e = format!("Error creating new address{}", addr);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
|
|
addr
|
|
};
|
|
|
|
self.do_save()?;
|
|
|
|
Ok(array![new_address])
|
|
}
|
|
|
|
// Start Mempool-Monitor
|
|
pub fn start_mempool_monitor(lc: Arc<LightClient>) -> Result<(), String> {
|
|
let config = lc.config.clone();
|
|
let uri = config.server.clone();
|
|
// TLS verification follows the config (default on), as block sync does; `dangerous` is the only bypass.
|
|
let no_cert = config.no_cert_verification;
|
|
let shutdown = lc.shutdown_flag.clone();
|
|
|
|
let (incoming_mempool_tx, incoming_mempool_rx) = std::sync::mpsc::channel::<RawTransaction>();
|
|
|
|
// Thread for receive transactions
|
|
let shutdown_rx = lc.shutdown_flag.clone();
|
|
std::thread::spawn(move || {
|
|
while let Ok(rtx) = incoming_mempool_rx.recv() {
|
|
if shutdown_rx.load(Ordering::Relaxed) {
|
|
break;
|
|
}
|
|
if let Ok(tx) = Transaction::read(
|
|
&rtx.data[..])
|
|
{
|
|
let light_wallet_clone = lc.wallet.clone();
|
|
// One bad mempool tx must not end this thread: the mempool monitor would stop silently.
|
|
let scanned = std::panic::catch_unwind(std::panic::AssertUnwindSafe(|| {
|
|
light_wallet_clone.read().unwrap().scan_full_mempool_tx(&tx, rtx.height as i32, 0, true);
|
|
}));
|
|
if scanned.is_err() {
|
|
error!("Scanning mempool tx {} panicked; skipped it", tx.txid());
|
|
}
|
|
}
|
|
}
|
|
});
|
|
|
|
// Thread mempool monitor
|
|
std::thread::spawn(move || {
|
|
let mut rt = Runtime::new().unwrap();
|
|
rt.block_on(async {
|
|
loop {
|
|
if shutdown.load(Ordering::Relaxed) {
|
|
info!("Mempool monitor shutting down");
|
|
break;
|
|
}
|
|
|
|
let incoming_mempool_tx_clone = incoming_mempool_tx.clone();
|
|
let send_closure = move |rtx: RawTransaction| {
|
|
incoming_mempool_tx_clone.send(rtx).map_err(|e| Box::new(e) as Box<dyn std::error::Error>)
|
|
};
|
|
|
|
match grpcconnector::monitor_mempool(&uri.clone(), no_cert, send_closure).await {
|
|
Ok(_) => info!("Mempool monitor loop successful"),
|
|
Err(e) => {
|
|
// If the server doesn't implement GetMempoolStream, stop the monitor instead
|
|
// of reconnecting forever against a method that will never succeed (log spam
|
|
// + needless churn). Other errors fall through to the periodic retry below.
|
|
if e.to_string().contains("Unimplemented") {
|
|
info!("Server does not implement GetMempoolStream; stopping mempool monitor");
|
|
return;
|
|
}
|
|
warn!("Mempool monitor returned {:?}, will restart listening", e);
|
|
}
|
|
}
|
|
|
|
// Sleep in 1-second increments so we can check shutdown flag
|
|
for _ in 0..10 {
|
|
if shutdown.load(Ordering::Relaxed) {
|
|
info!("Mempool monitor shutting down during sleep");
|
|
return;
|
|
}
|
|
std::thread::sleep(Duration::from_secs(1));
|
|
}
|
|
}
|
|
});
|
|
});
|
|
|
|
Ok(())
|
|
}
|
|
|
|
/// Signal all background threads to stop
|
|
pub fn shutdown(&self) {
|
|
self.shutdown_flag.store(true, Ordering::Relaxed);
|
|
info!("Shutdown flag set");
|
|
}
|
|
/// Convinence function to determine what type of key this is and import it
|
|
pub fn do_import_key(&self, key: String, birthday: u64) -> Result<JsonValue, String> {
|
|
if key.starts_with(self.config.hrp_sapling_private_key()) {
|
|
self.do_import_sk(key, birthday)
|
|
} else if key.starts_with(self.config.hrp_sapling_viewing_key()) {
|
|
self.do_import_vk(key, birthday)
|
|
} else {
|
|
Err(format!("'{}' was not recognized as either a spending key or a viewing key because it didn't start with either '{}' or '{}'",
|
|
key, self.config.hrp_sapling_private_key(), self.config.hrp_sapling_viewing_key()))
|
|
}
|
|
}
|
|
|
|
/// Import a new private key
|
|
pub fn do_import_sk(&self, sk: String, birthday: u64) -> Result<JsonValue, String> {
|
|
// Checked before "locked": unlocking would not help (s1-D1). No "Error: " prefix here; the console
|
|
// import/timport commands add it.
|
|
if self.wallet.read().unwrap().is_encrypted() {
|
|
let e = "Can't import a private key while the wallet is encrypted - remove encryption, import, then encrypt again".to_string();
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked".to_string());
|
|
}
|
|
|
|
let new_address = {
|
|
let mut wallet = self.wallet.write().unwrap();
|
|
|
|
let addr = wallet.add_imported_sk(sk, birthday);
|
|
if addr.starts_with("Error") {
|
|
let e = format!("Error creating new address{}", addr);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
|
|
addr
|
|
};
|
|
|
|
self.do_save()?;
|
|
|
|
Ok(array![new_address])
|
|
}
|
|
|
|
/// Import a new viewing key
|
|
pub fn do_import_vk(&self, vk: String, birthday: u64) -> Result<JsonValue, String> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked".to_string());
|
|
}
|
|
|
|
let new_address = {
|
|
let mut wallet = self.wallet.write().unwrap();
|
|
|
|
let addr = wallet.add_imported_vk(vk, birthday);
|
|
if addr.starts_with("Error") {
|
|
let e = format!("Error creating new address{}", addr);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
addr
|
|
};
|
|
|
|
self.do_save()?;
|
|
|
|
Ok(array![new_address])
|
|
}
|
|
|
|
pub fn do_new_sietchaddress(&self, addr_type: &str) -> Result<JsonValue, String> {
|
|
|
|
let zdust_address = {
|
|
let wallet = self.wallet.write().unwrap();
|
|
|
|
match addr_type {
|
|
"zs" => wallet.add_zaddrdust(),
|
|
|
|
_ => {
|
|
let e = format!("Unrecognized address type: {}", addr_type);
|
|
error!("{}", e);
|
|
return Err(e);
|
|
}
|
|
}
|
|
};
|
|
|
|
Ok(array![zdust_address])
|
|
}
|
|
|
|
pub fn clear_state(&self) {
|
|
// Read the birthday into a local first: the wallet read guard must NOT be alive while
|
|
// clear_state_from waits for sync_lock (lock order is sync_lock -> wallet, as in do_save/do_sync).
|
|
// Held across the call it was also a recursive read lock, which a queued writer (a save) deadlocks.
|
|
let birthday = self.wallet.read().unwrap().get_birthday();
|
|
self.clear_state_from(birthday);
|
|
}
|
|
|
|
pub fn clear_state_from(&self, height: u64) {
|
|
// Serialize with sync/save/send: a sync that has already snapshotted the wallet's notes would
|
|
// otherwise find them gone mid-scan. No caller holds sync_lock, and the order is sync_lock -> wallet.
|
|
let _sync = self.sync_lock.lock().unwrap();
|
|
|
|
// First, clear the state from the wallet
|
|
self.wallet.read().unwrap().clear_blocks();
|
|
|
|
// Then set the initial block
|
|
self.set_wallet_initial_state(height);
|
|
info!("Cleared wallet state to height {}", height);
|
|
}
|
|
|
|
pub fn do_rescan(&self) -> Result<JsonValue, String> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
warn!("Wallet is locked, new HD addresses won't be added!");
|
|
}
|
|
|
|
info!("Rescan starting");
|
|
|
|
self.clear_state();
|
|
|
|
// Then, do a sync, which will force a full rescan from the initial state
|
|
let response = self.do_sync(true);
|
|
|
|
self.do_save()?;
|
|
info!("Rescan finished");
|
|
|
|
response
|
|
}
|
|
|
|
/// Return the syncing status of the wallet
|
|
pub fn do_scan_status(&self) -> WalletStatus {
|
|
self.sync_status.read().unwrap().clone()
|
|
}
|
|
|
|
pub fn do_sync(&self, print_updates: bool) -> Result<JsonValue, String> {
|
|
|
|
let mut retry_count = 0;
|
|
loop {
|
|
match self.do_sync_internal(print_updates, retry_count) {
|
|
Ok(j) => return Ok(j),
|
|
Err(e) => {
|
|
retry_count += 1;
|
|
if retry_count > 5 {
|
|
return Err(e);
|
|
}
|
|
// Sleep exponentially backing off
|
|
std::thread::sleep(std::time::Duration::from_secs((2 as u64).pow(retry_count)));
|
|
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
pub fn do_shield(&self, address: Option<String>) -> Result<String, String> {
|
|
use zcash_primitives::transaction::components::amount::DEFAULT_FEE;
|
|
use std::convert::TryInto;
|
|
|
|
let fee = DEFAULT_FEE.try_into().unwrap();
|
|
let tbal = self.wallet.read().unwrap().tbalance(None);
|
|
|
|
// Make sure there is a balance, and it is greated than the amount
|
|
if tbal <= fee {
|
|
return Err(format!("Not enough transparent balance to shield. Have {} puposhis, need more than {} puposhis to cover tx fee", tbal, fee));
|
|
}
|
|
|
|
let addr = address.or(self.wallet.read().unwrap().get_all_zaddresses().get(0).map(|s| s.clone())).unwrap();
|
|
let fee: u64 = DEFAULT_FEE.try_into().unwrap();
|
|
|
|
let result = {
|
|
let _lock = self.sync_lock.lock().unwrap();
|
|
self.wallet.read().unwrap().send_to_address(
|
|
u32::from_str_radix(&self.config.consensus_branch_id, 16).unwrap(),
|
|
&self.sapling_spend, &self.sapling_output,
|
|
true,
|
|
vec![(&addr, tbal - fee, None)],
|
|
&fee,
|
|
|txbytes| broadcast_raw_tx(&self.get_server_uri(),self.config.no_cert_verification, txbytes)
|
|
)
|
|
};
|
|
|
|
result.map(|(txid, _)| txid)
|
|
}
|
|
|
|
fn do_sync_internal(&self, print_updates: bool, retry_count: u32) -> Result<JsonValue, String> {
|
|
// We can only do one sync at a time because we sync blocks in serial order
|
|
// If we allow multiple syncs, they'll all get jumbled up.
|
|
let _lock = self.sync_lock.lock().unwrap();
|
|
|
|
// Sync is 3 parts
|
|
// 1. Get the latest block
|
|
// 2. Get all the blocks that we don't have
|
|
// 3. Find all new Txns that don't have the full Tx, and get them as full transactions
|
|
// and scan them, mainly to get the memos
|
|
let mut last_scanned_height = self.wallet.read().unwrap().last_scanned_height() as u64;
|
|
|
|
// This will hold the latest block fetched from the RPC
|
|
|
|
let latest_block = fetch_latest_block(&self.get_server_uri(), self.config.no_cert_verification)?.height;
|
|
|
|
if latest_block < last_scanned_height {
|
|
let w = format!("Server's latest block({}) is behind ours({})", latest_block, last_scanned_height);
|
|
warn!("{}", w);
|
|
return Err(w);
|
|
}
|
|
|
|
info!("Latest block is {}", latest_block);
|
|
|
|
// Get the end height to scan to.
|
|
// get_block_range streams an ENTIRE range over ONE gRPC connection, so the batch size is
|
|
// the dominant factor in how many TCP connections a sync opens. The old 1000 meant ~1300
|
|
// connections for a full sync, which on Windows exhausted socket buffers (WSAENOBUFS / os
|
|
// error 10055). A large batch (25k) cuts that ~50x (~52 connections for a full sync) with
|
|
// no extra memory — blocks are still streamed + scanned incrementally, not buffered.
|
|
let scan_batch_size = 25000;
|
|
let mut end_height = std::cmp::min(last_scanned_height + scan_batch_size, latest_block);
|
|
|
|
// If there's nothing to scan, just return
|
|
if last_scanned_height == latest_block {
|
|
info!("Nothing to sync, returning");
|
|
return Ok(object!{ "result" => "success" })
|
|
}
|
|
|
|
{
|
|
let mut status = self.sync_status.write().unwrap();
|
|
status.is_syncing = true;
|
|
status.synced_blocks = last_scanned_height;
|
|
status.total_blocks = latest_block;
|
|
}
|
|
|
|
// Count how many bytes we've downloaded
|
|
let bytes_downloaded = Arc::new(AtomicUsize::new(0));
|
|
|
|
let mut total_reorg = 0;
|
|
|
|
// Collect all txns in blocks that we have a tx in. We'll fetch all these
|
|
// txs along with our own, so that the server doesn't learn which ones
|
|
// belong to us.
|
|
let all_new_txs = Arc::new(RwLock::new(vec![]));
|
|
|
|
// Create a new threadpool (upto 8, atleast 2 threads) to scan with
|
|
let pool = ThreadPool::new(max(2, min(8, num_cpus::get())));
|
|
|
|
// Create a single Tokio runtime for all block fetches to avoid per-batch overhead
|
|
let mut rt = tokio::runtime::Runtime::new()
|
|
.map_err(|e| format!("Error creating runtime: {:?}", e))?;
|
|
|
|
// Fetch CompactBlocks in increments
|
|
let mut pass = 0;
|
|
loop {
|
|
pass +=1 ;
|
|
// Collect all block times, because we'll need to update transparent tx
|
|
// datetime via the block height timestamp
|
|
let block_times = Arc::new(RwLock::new(HashMap::new()));
|
|
|
|
let local_light_wallet = self.wallet.clone();
|
|
let local_bytes_downloaded = bytes_downloaded.clone();
|
|
|
|
let start_height = last_scanned_height + 1;
|
|
info!("Start height is {}", start_height);
|
|
|
|
// Show updates only if we're syncing a lot of blocks
|
|
if print_updates && (latest_block - start_height) > 100 {
|
|
print!("Syncing {}/{}\r", start_height, latest_block);
|
|
io::stdout().flush().ok().expect("Could not flush stdout");
|
|
}
|
|
|
|
{
|
|
let mut status = self.sync_status.write().unwrap();
|
|
status.is_syncing = true;
|
|
status.synced_blocks = start_height;
|
|
status.total_blocks = latest_block;
|
|
}
|
|
|
|
// Fetch compact blocks
|
|
info!("Fetching blocks {}-{}", start_height, end_height);
|
|
|
|
let all_txs = all_new_txs.clone();
|
|
let block_times_inner = block_times.clone();
|
|
|
|
let last_invalid_height = Arc::new(AtomicI32::new(0));
|
|
let last_invalid_height_inner = last_invalid_height.clone();
|
|
let tpool = pool.clone();
|
|
fetch_blocks_with_runtime(&mut rt, &self.get_server_uri(), start_height, end_height, self.config.no_cert_verification, pool.clone(),
|
|
move |encoded_block: &[u8], height: u64| {
|
|
// Process the block only if there were no previous errors
|
|
if last_invalid_height_inner.load(Ordering::SeqCst) > 0 {
|
|
return;
|
|
}
|
|
|
|
// Parse the block and save it's time. We'll use this timestamp for
|
|
// transactions in this block that might belong to us.
|
|
let block: Result<zcash_client_backend::proto::compact_formats::CompactBlock, _>
|
|
= parse_from_bytes(encoded_block);
|
|
match block {
|
|
Ok(b) => {
|
|
block_times_inner.write().unwrap().insert(b.height, b.time);
|
|
},
|
|
Err(_) => {}
|
|
}
|
|
|
|
match local_light_wallet.read().unwrap().scan_block_with_pool(encoded_block, &tpool) {
|
|
Ok(block_txns) => {
|
|
// Add to global tx list
|
|
all_txs.write().unwrap().extend_from_slice(&block_txns.iter().map(|txid| (txid.clone(), height as i32)).collect::<Vec<_>>()[..]);
|
|
},
|
|
Err(invalid_height) => {
|
|
// Block at this height seems to be invalid, so invalidate up till that point
|
|
last_invalid_height_inner.store(invalid_height, Ordering::SeqCst);
|
|
}
|
|
};
|
|
|
|
local_bytes_downloaded.fetch_add(encoded_block.len(), Ordering::SeqCst);
|
|
})?;
|
|
|
|
|
|
{
|
|
|
|
|
|
let t = self.wallet.read().unwrap();
|
|
let mut d = t.total_scan_duration.write().unwrap();
|
|
d.clear();
|
|
d.push(std::time::Duration::new(0, 0));
|
|
}
|
|
|
|
// Check if there was any invalid block, which means we might have to do a reorg
|
|
let invalid_height = last_invalid_height.load(Ordering::SeqCst);
|
|
if invalid_height > 0 {
|
|
total_reorg += self.wallet.read().unwrap().invalidate_block(invalid_height);
|
|
|
|
warn!("Invalidated block at height {}. Total reorg is now {}", invalid_height, total_reorg);
|
|
}
|
|
|
|
// Make sure we're not re-orging too much!
|
|
if total_reorg > (crate::lightwallet::MAX_REORG - 1) as u64 {
|
|
error!("Reorg has now exceeded {} blocks!", crate::lightwallet::MAX_REORG);
|
|
return Err(format!("Reorg has exceeded {} blocks. Aborting.", crate::lightwallet::MAX_REORG));
|
|
}
|
|
|
|
if invalid_height > 0 {
|
|
// Reset the scanning heights
|
|
last_scanned_height = (invalid_height - 1) as u64;
|
|
end_height = std::cmp::min(last_scanned_height + scan_batch_size, latest_block);
|
|
|
|
warn!("Reorg: reset scanning from {} to {}", last_scanned_height, end_height);
|
|
|
|
continue;
|
|
}
|
|
|
|
// If it got here, that means the blocks are scanning properly now.
|
|
// So, reset the total_reorg
|
|
total_reorg = 0;
|
|
|
|
// If this is the first pass after a retry, fetch older t address txids too, becuse
|
|
// they might have been missed last time.
|
|
let transparent_start_height = if pass == 1 && retry_count > 0 {
|
|
start_height - scan_batch_size
|
|
} else {
|
|
start_height
|
|
};
|
|
|
|
// Fetch the txids our transparent addresses are involved with. TLS verification follows the
|
|
// config (default on); `dangerous` is the only way to turn it off.
|
|
self.scan_taddress_txids(&pool, block_times, transparent_start_height, end_height, self.config.no_cert_verification)?;
|
|
|
|
// Do block height accounting
|
|
last_scanned_height = end_height;
|
|
end_height = last_scanned_height + scan_batch_size;
|
|
|
|
if last_scanned_height >= latest_block {
|
|
break;
|
|
} else if end_height > latest_block {
|
|
end_height = latest_block;
|
|
}
|
|
}
|
|
|
|
if print_updates{
|
|
println!(""); // New line to finish up the updates
|
|
}
|
|
|
|
info!("Synced to {}, Downloaded {} kB", latest_block, bytes_downloaded.load(Ordering::SeqCst) / 1024);
|
|
{
|
|
let mut status = self.sync_status.write().unwrap();
|
|
status.is_syncing = false;
|
|
status.synced_blocks = latest_block;
|
|
status.total_blocks = latest_block;
|
|
}
|
|
|
|
// Get the Raw transaction for all the wallet transactions
|
|
|
|
{
|
|
let decoy_txids = all_new_txs.read().unwrap();
|
|
match self.scan_fill_fulltxs(&mut rt, &pool, decoy_txids.to_vec()) {
|
|
Ok(_) => Ok(object!{
|
|
"result" => "success",
|
|
"latest_block" => latest_block,
|
|
"downloaded_bytes" => bytes_downloaded.load(Ordering::SeqCst)
|
|
}),
|
|
Err(e) => Err(format!("Error fetching all txns for memos: {}", e))
|
|
}
|
|
}
|
|
}
|
|
fn scan_taddress_txids(
|
|
&self,
|
|
pool: &ThreadPool,
|
|
block_times: Arc<RwLock<HashMap<u64, u32>>>,
|
|
start_height: u64,
|
|
end_height: u64,
|
|
no_cert: bool
|
|
) -> Result<Vec<()>, String> {
|
|
// The per-address job: fetch the address's txids and full-scan each tx (scan_full_tx).
|
|
self.scan_taddress_txids_with(pool, {
|
|
let wallet = self.wallet.clone();
|
|
let server_uri = self.get_server_uri();
|
|
move |address: String| -> Result<(), String> {
|
|
let wallet = wallet.clone();
|
|
let block_times = block_times.clone();
|
|
fetch_transparent_txids(
|
|
&server_uri,
|
|
address,
|
|
start_height,
|
|
end_height,
|
|
no_cert,
|
|
move |tx_bytes: &[u8], height: u64| {
|
|
let tx_result = Transaction::read(tx_bytes)
|
|
.map_err(|e| format!("Failed to read transaction: {:?}", e));
|
|
|
|
match tx_result {
|
|
Ok(tx) => {
|
|
let datetime_result = block_times.read()
|
|
.map_err(|e| format!("Failed to read block times: {:?}", e))
|
|
.and_then(|bt| bt.get(&height).cloned().ok_or_else(|| format!("No datetime for height: {}", height)));
|
|
|
|
match datetime_result {
|
|
Ok(datetime) => {
|
|
match wallet.read().map_err(|e| format!("Failed to read wallet: {:?}", e)) {
|
|
Ok(w) => {
|
|
w.scan_full_tx(&tx, height as i32, datetime as u64);
|
|
},
|
|
Err(e) => {
|
|
error!("Error reading wallet: {}", e);
|
|
},
|
|
}
|
|
},
|
|
Err(e) => {
|
|
error!("Error processing transaction: {}", e);
|
|
},
|
|
}
|
|
},
|
|
Err(e) => {
|
|
error!("Error reading transaction: {}", e);
|
|
},
|
|
}
|
|
}
|
|
)
|
|
}
|
|
})
|
|
}
|
|
|
|
// The t-address collector; `job` is the per-address work (a private seam, so a test can make a job panic). Every
|
|
// job sends exactly one result, a panicking one included, and only the jobs hold senders: the collector can
|
|
// neither wait forever on a job that died (with sync_lock held) nor report a partial scan as success.
|
|
fn scan_taddress_txids_with<F>(&self, pool: &ThreadPool, job: F) -> Result<Vec<()>, String>
|
|
where F: Fn(String) -> Result<(), String> + Send + Sync + 'static
|
|
{
|
|
let addresses = self.wallet.read()
|
|
.map_err(|e| format!("Failed to read wallet: {:?}", e))?
|
|
.get_all_taddresses().iter()
|
|
.cloned()
|
|
.collect::<Vec<String>>();
|
|
|
|
let job = Arc::new(job);
|
|
let (ctx, crx) = channel();
|
|
let num_addresses = addresses.len();
|
|
|
|
for address in addresses {
|
|
let address_clone = address.clone();
|
|
let ctx = ctx.clone();
|
|
let job = job.clone();
|
|
|
|
pool.execute(move || {
|
|
let r = std::panic::catch_unwind(std::panic::AssertUnwindSafe(|| (*job)(address)))
|
|
.unwrap_or_else(|_| Err("t-address scan job panicked".to_string()));
|
|
match ctx.send(r) {
|
|
Ok(_) => info!("Successfully sent data for address: {}", address_clone),
|
|
Err(e) => error!("Failed to send data for address: {}: {:?}", address_clone, e),
|
|
}
|
|
});
|
|
}
|
|
drop(ctx);
|
|
|
|
// Ends once every job has sent its result and dropped its sender.
|
|
let results: Vec<Result<(), String>> = crx.iter().collect();
|
|
if results.len() != num_addresses {
|
|
return Err(format!("t-address scan: {} of {} jobs reported", results.len(), num_addresses));
|
|
}
|
|
results.into_iter().collect()
|
|
}
|
|
|
|
|
|
fn scan_fill_fulltxs(&self, rt: &mut Runtime, pool: &ThreadPool, decoy_txids: Vec<(TxId, i32)>) -> Result<(), String> {
|
|
|
|
// We need to first copy over the Txids from the wallet struct, because
|
|
// we need to free the read lock from here (Because we'll self.wallet.txs later)
|
|
let own_txids: Vec<(TxId, i32)> = self.wallet.read().unwrap().txs.read().unwrap().values()
|
|
.filter(|wtx| wtx.full_tx_scanned == false)
|
|
.map(|wtx| (wtx.txid.clone(), wtx.block))
|
|
.collect::<Vec<(TxId, i32)>>();
|
|
|
|
info!("Fetching {} new txids, total {} with decoy", own_txids.len(), decoy_txids.len());
|
|
|
|
// Own txs and decoys go out as ONE (txid, height)-sorted, de-duplicated list, exactly as
|
|
// before, over one shared connection on the sync runtime. Request order, retries and the
|
|
// stop rule are identical for own txs and decoys, so the server cannot tell them apart.
|
|
let (items, own_set) = crate::fulltx_fetch::plan_fetch_list(own_txids, decoy_txids);
|
|
let policy = crate::fulltx_fetch::FetchPolicy::for_pool(pool);
|
|
let fetch = grpcconnector::make_shared_tx_fetcher(self.get_server_uri(), self.config.no_cert_verification);
|
|
let scan = crate::fulltx_fetch::wallet_scan_fn(self.wallet.clone());
|
|
|
|
crate::fulltx_fetch::run_fetch_scan(rt, items, own_set, policy, pool.clone(), fetch, scan)
|
|
}
|
|
|
|
pub fn do_send(&self, addrs: Vec<(&str, u64, Option<String>)>, fee: &u64) -> Result<String, String> {
|
|
if !self.wallet.read().unwrap().is_unlocked_for_spending() {
|
|
error!("Wallet is locked");
|
|
return Err("Wallet is locked".to_string());
|
|
}
|
|
|
|
info!("Creating transaction");
|
|
|
|
let result = {
|
|
let _lock = self.sync_lock.lock().unwrap();
|
|
|
|
self.wallet.write().unwrap().send_to_address(
|
|
u32::from_str_radix(&self.config.consensus_branch_id, 16).unwrap(),
|
|
&self.sapling_spend, &self.sapling_output,
|
|
false,
|
|
addrs,
|
|
fee,
|
|
|txbytes| broadcast_raw_tx(&self.get_server_uri(), self.config.no_cert_verification, txbytes)
|
|
)
|
|
};
|
|
|
|
result.map(|(txid, _)| txid)
|
|
}
|
|
}
|
|
|
|
#[cfg(test)]
|
|
pub mod tests {
|
|
use lazy_static::lazy_static;
|
|
use tempdir::TempDir;
|
|
use super::{LightClient, LightClientConfig};
|
|
|
|
lazy_static!{
|
|
static ref TEST_SEED: String = "youth strong sweet gorilla hammer unhappy congress stamp left stereo riot salute road tag clean toilet artefact fork certain leopard entire civil degree wonder".to_string();
|
|
}
|
|
|
|
// Every client here is on the "main" chain (the "test" chain, which LightClient::unconnected
|
|
// hard-codes, panics in base58_pubkey_address when the wallet is created) and lives in a temp
|
|
// data dir, so nothing is ever written to the real ~/.silentdragonxlite.
|
|
fn main_config(tmp: &TempDir) -> LightClientConfig {
|
|
LightClientConfig::create_unconnected("main".to_string(), tmp.path().to_str().map(|s| s.to_string()))
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_encrypt_decrypt() {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(&tmp), 0, 0, false).unwrap();
|
|
|
|
assert!(!lc.do_export(None).is_err());
|
|
assert!(!lc.do_new_address("zs").is_err());
|
|
assert!(!lc.do_new_address("R").is_err());
|
|
assert_eq!(lc.do_seed_phrase().unwrap()["seed"], TEST_SEED.to_string());
|
|
|
|
// Encrypt and Lock the wallet
|
|
lc.wallet.write().unwrap().encrypt("password".to_string()).unwrap();
|
|
assert!(lc.do_export(None).is_err());
|
|
assert!(lc.do_seed_phrase().is_err());
|
|
assert!(lc.do_new_address("R").is_err());
|
|
assert!(lc.do_new_address("zs").is_err());
|
|
assert!(lc.do_send(vec![("zs", 0, None)], &10000).is_err());
|
|
|
|
// Do a unlock, and make sure it all works now
|
|
lc.wallet.write().unwrap().unlock("password".to_string()).unwrap();
|
|
assert!(!lc.do_export(None).is_err());
|
|
assert!(!lc.do_seed_phrase().is_err());
|
|
|
|
// Can't add keys while unlocked but encrypted
|
|
assert!(lc.do_new_address("R").is_err());
|
|
assert!(lc.do_new_address("zs").is_err());
|
|
|
|
// Remove encryption, which will allow adding
|
|
lc.wallet.write().unwrap().remove_encryption("password".to_string()).unwrap();
|
|
|
|
assert!(lc.do_new_address("R").is_ok());
|
|
assert!(lc.do_new_address("zs").is_ok());
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_addresses() {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(&tmp), 0, 50, false).unwrap();
|
|
|
|
{
|
|
let addresses = lc.do_address();
|
|
// When restoring from seed with 50 extra z-addresses, there should be 50+1 z and 5+1 t addresses
|
|
assert_eq!(addresses["z_addresses"].len(), 51);
|
|
assert_eq!(addresses["t_addresses"].len(), 6);
|
|
}
|
|
|
|
// Add new z and t addresses
|
|
|
|
let taddr1 = lc.do_new_address("R").unwrap()[0].as_str().unwrap().to_string();
|
|
let taddr2 = lc.do_new_address("R").unwrap()[0].as_str().unwrap().to_string();
|
|
let zaddr1 = lc.do_new_address("zs").unwrap()[0].as_str().unwrap().to_string();
|
|
let zaddr2 = lc.do_new_address("zs").unwrap()[0].as_str().unwrap().to_string();
|
|
|
|
let addresses = lc.do_address();
|
|
|
|
assert_eq!(addresses["z_addresses"].len(), 53);
|
|
assert_eq!(addresses["z_addresses"][51], zaddr1);
|
|
assert_eq!(addresses["z_addresses"][52], zaddr2);
|
|
|
|
assert_eq!(addresses["t_addresses"].len(), 8);
|
|
assert_eq!(addresses["t_addresses"][6], taddr1);
|
|
assert_eq!(addresses["t_addresses"][7], taddr2);
|
|
|
|
use std::sync::{Arc, RwLock, Mutex};
|
|
use std::sync::atomic::AtomicBool;
|
|
use crate::lightclient::{WalletStatus, LightWallet};
|
|
|
|
// When creating a new wallet, there is only 1 address
|
|
let tmp2 = TempDir::new("lctest").unwrap();
|
|
let config = main_config(&tmp2);
|
|
let lc = LightClient {
|
|
wallet : Arc::new(RwLock::new(LightWallet::new(None, &config, 0, 0).unwrap())),
|
|
config : config,
|
|
sapling_output : std::borrow::Cow::Borrowed(&[]),
|
|
sapling_spend : std::borrow::Cow::Borrowed(&[]),
|
|
sync_lock : Mutex::new(()),
|
|
sync_status : Arc::new(RwLock::new(WalletStatus::new())),
|
|
shutdown_flag : Arc::new(AtomicBool::new(false)),
|
|
};
|
|
{
|
|
let addresses = lc.do_address();
|
|
// New wallets have only 1 address
|
|
assert_eq!(addresses["z_addresses"].len(), 1);
|
|
assert_eq!(addresses["t_addresses"].len(), 1);
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_bad_import() {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(&tmp), 0, 0, false).unwrap();
|
|
|
|
assert!(lc.do_import_sk("bad_priv_key".to_string(), 0).is_err());
|
|
assert!(lc.do_import_vk("bad_view_key".to_string(), 0).is_err());
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_wallet_creation() {
|
|
// Create a new tmp director
|
|
{
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let dir_name = tmp.path().to_str().map(|s| s.to_string());
|
|
|
|
// A lightclient to a new, empty directory works.
|
|
let config = LightClientConfig::create_unconnected("main".to_string(), dir_name);
|
|
let lc = LightClient::new(&config, 0).unwrap();
|
|
let seed = lc.do_seed_phrase().unwrap()["seed"].as_str().unwrap().to_string();
|
|
lc.do_save().unwrap();
|
|
|
|
// Doing another new will fail, because the wallet file now already exists
|
|
assert!(LightClient::new(&config, 0).is_err());
|
|
|
|
// new_from_phrase will not work either, again, because wallet file exists
|
|
assert!(LightClient::new_from_phrase(TEST_SEED.to_string(), &config, 0, 0, false).is_err());
|
|
|
|
// Creating a lightclient to the same dir without a seed should re-read the same wallet
|
|
// file and therefore the same seed phrase
|
|
let lc2 = LightClient::read_from_disk(&config).unwrap();
|
|
assert_eq!(seed, lc2.do_seed_phrase().unwrap()["seed"].as_str().unwrap().to_string());
|
|
}
|
|
|
|
// Now, get a new directory, and try to read from phrase
|
|
{
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let dir_name = tmp.path().to_str().map(|s| s.to_string());
|
|
|
|
let config = LightClientConfig::create_unconnected("main".to_string(), dir_name);
|
|
|
|
// read_from_disk will fail, because the dir doesn't exist
|
|
assert!(LightClient::read_from_disk(&config).is_err());
|
|
|
|
// New from phrase should work becase a file doesn't exist already
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &config, 0, 0, false).unwrap();
|
|
assert_eq!(TEST_SEED.to_string(), lc.do_seed_phrase().unwrap()["seed"].as_str().unwrap().to_string());
|
|
lc.do_save().unwrap();
|
|
|
|
// Now a new will fail because wallet exists
|
|
assert!(LightClient::new(&config, 0).is_err());
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_recover_seed() {
|
|
// Create a new tmp director
|
|
{
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let dir_name = tmp.path().to_str().map(|s| s.to_string());
|
|
|
|
// A lightclient to a new, empty directory works.
|
|
let config = LightClientConfig::create_unconnected("main".to_string(), dir_name);
|
|
let lc = LightClient::new(&config, 0).unwrap();
|
|
let seed = lc.do_seed_phrase().unwrap()["seed"].as_str().unwrap().to_string();
|
|
lc.do_save().unwrap();
|
|
|
|
assert_eq!(seed, LightClient::attempt_recover_seed(&config, None).unwrap());
|
|
|
|
// Now encrypt and save the file
|
|
let pwd = "password".to_string();
|
|
lc.wallet.write().unwrap().encrypt(pwd.clone()).unwrap();
|
|
|
|
assert_eq!(seed, LightClient::attempt_recover_seed(&config, Some(pwd)).unwrap());
|
|
}
|
|
}
|
|
|
|
// C243 tripwire: the t-address scan and the mempool monitor must take TLS verification from the config
|
|
// (no_cert_verification, which only `dangerous` sets), never from a hard-coded `true`. The needles are
|
|
// joined at runtime so that this test's own source cannot match them.
|
|
#[test]
|
|
pub fn test_tls_verification_not_hardcoded_off() {
|
|
let src = include_str!("lightclient.rs");
|
|
let taddr_needle = ["let no_cert", "= true"].join(" ");
|
|
let mempool_needle = ["monitor_mempool(&uri.clone(),", "true"].join(" ");
|
|
assert!(!src.contains(&taddr_needle), "the t-address scan turns TLS verification off");
|
|
assert!(!src.contains(&mempool_needle), "the mempool monitor turns TLS verification off");
|
|
}
|
|
|
|
// U2: clear_state/clear_state_from serialize with a running sync (sync_lock) and hold no wallet guard
|
|
// while they wait for it (lock order sync_lock -> wallet, as in do_save/do_sync). No test joins a thread
|
|
// that could be deadlocked: they wait on channels with timeouts.
|
|
fn shared_client(tmp: &TempDir) -> std::sync::Arc<LightClient> {
|
|
std::sync::Arc::new(LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(tmp), 0, 0, false).unwrap())
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_clear_state_waits_for_sync_lock() {
|
|
use std::sync::mpsc::{channel, RecvTimeoutError};
|
|
use std::time::Duration;
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = shared_client(&tmp);
|
|
|
|
let sync = lc.sync_lock.lock().unwrap();
|
|
let (tx, rx) = channel();
|
|
let lc2 = lc.clone();
|
|
let t = std::thread::spawn(move || { lc2.clear_state_from(0); let _ = tx.send(()); });
|
|
let early = rx.recv_timeout(Duration::from_millis(300));
|
|
drop(sync);
|
|
assert_eq!(early, Err(RecvTimeoutError::Timeout), "clear_state_from ran while a sync held sync_lock");
|
|
assert!(rx.recv_timeout(Duration::from_secs(5)).is_ok(), "clear_state_from did not finish after the sync ended");
|
|
t.join().unwrap();
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_clear_state_holds_no_wallet_guard_while_waiting() {
|
|
use std::sync::mpsc::channel;
|
|
use std::time::Duration;
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = shared_client(&tmp);
|
|
|
|
let sync = lc.sync_lock.lock().unwrap();
|
|
let (btx, brx) = channel();
|
|
let lc_b = lc.clone();
|
|
let b = std::thread::spawn(move || { lc_b.clear_state(); let _ = btx.send(()); });
|
|
std::thread::sleep(Duration::from_millis(200));
|
|
let (wtx, wrx) = channel();
|
|
let lc_w = lc.clone();
|
|
let w = std::thread::spawn(move || { let _g = lc_w.wallet.write().unwrap(); let _ = wtx.send(()); });
|
|
let writer_ok = wrx.recv_timeout(Duration::from_secs(2)).is_ok();
|
|
let b_early = brx.try_recv().is_ok();
|
|
drop(sync);
|
|
assert!(writer_ok, "clear_state held a wallet read guard while it waited for sync_lock (a concurrent save deadlocks)");
|
|
assert!(!b_early, "clear_state finished while a sync held sync_lock");
|
|
assert!(brx.recv_timeout(Duration::from_secs(5)).is_ok(), "clear_state did not finish after the sync ended");
|
|
b.join().unwrap();
|
|
w.join().unwrap();
|
|
}
|
|
|
|
#[test]
|
|
pub fn test_clear_state_does_not_leak_sync_lock() {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = shared_client(&tmp);
|
|
lc.clear_state();
|
|
assert!(lc.sync_lock.try_lock().is_ok(), "clear_state left sync_lock held");
|
|
lc.clear_state_from(0);
|
|
assert!(lc.sync_lock.try_lock().is_ok(), "clear_state_from left sync_lock held");
|
|
}
|
|
|
|
// Regression guard only (the race is timing-dependent, so it is no fails-before proof): before the birthday
|
|
// hoist, clear_state held a wallet read guard across clear_state_from, which read-locks the wallet again; a
|
|
// writer queued in between deadlocks a writer-preferring RwLock (Linux futex, Windows SRW).
|
|
#[test]
|
|
pub fn test_clear_state_no_recursive_read_deadlock() {
|
|
use std::sync::mpsc::channel;
|
|
use std::time::{Duration, Instant};
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = shared_client(&tmp);
|
|
|
|
let (tx, rx) = channel();
|
|
let (lc_r, tx_r) = (lc.clone(), tx.clone());
|
|
let r = std::thread::spawn(move || { for _ in 0..200 { lc_r.clear_state(); } let _ = tx_r.send(()); });
|
|
let lc_w = lc.clone();
|
|
let w = std::thread::spawn(move || { for _ in 0..200 { let _g = lc_w.wallet.write().unwrap(); } let _ = tx.send(()); });
|
|
let deadline = Instant::now() + Duration::from_secs(20);
|
|
for _ in 0..2 {
|
|
let left = deadline.saturating_duration_since(Instant::now());
|
|
assert!(rx.recv_timeout(left).is_ok(), "clear_state and a wallet writer deadlocked (20 s watchdog)");
|
|
}
|
|
r.join().unwrap();
|
|
w.join().unwrap();
|
|
}
|
|
|
|
// C251 (s2): a WIF that cannot be decoded returns Err and leaves the wallet lock usable. Before, import_taddr
|
|
// panicked under the wallet write guard (bs58 unwrap / hex slice), which poisoned the wallet until restart.
|
|
#[test]
|
|
pub fn test_bad_import_does_not_poison() {
|
|
use std::panic::{catch_unwind, AssertUnwindSafe};
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(&tmp), 0, 0, false).unwrap();
|
|
let before = lc.do_address();
|
|
|
|
for bad in &["zs1notawif", "secret-extended-key-main1qqqqqqqqqq", "", "1"] {
|
|
let r = catch_unwind(AssertUnwindSafe(|| lc.do_import_tk(bad.to_string(), 0)));
|
|
let e = match r {
|
|
Ok(Err(e)) => e,
|
|
Ok(Ok(a)) => panic!("{:?} imported as {}", bad, a),
|
|
Err(_) => panic!("do_import_tk({:?}) panicked", bad),
|
|
};
|
|
assert!(e.contains("Couldn't decode the transparent private key"), "{:?}: {}", bad, e);
|
|
assert!(bad.len() < 2 || !e.contains(bad), "the error echoes the key: {}", e);
|
|
// separate statements: a read guard alive in the same expression would deadlock the write()
|
|
assert!(lc.wallet.read().is_ok(), "the wallet lock is poisoned");
|
|
assert!(lc.wallet.write().is_ok(), "the wallet lock is poisoned");
|
|
}
|
|
assert_eq!(lc.do_address(), before);
|
|
}
|
|
|
|
// C252 (s1 test 8): a private-key import into an encrypted wallet is refused with the "encrypted" reason
|
|
// whether the wallet is locked or unlocked (never "Wallet is locked", which would send the user to unlock and
|
|
// retry), and it leaves the wallet able to lock, save and show its real seed. Viewing keys still import.
|
|
#[test]
|
|
pub fn test_encrypted_import_is_clean() {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new_from_phrase(TEST_SEED.to_string(), &main_config(&tmp), 0, 0, false).unwrap();
|
|
let tmp2 = TempDir::new("lctest").unwrap();
|
|
let other = LightClient::new(&main_config(&tmp2), 0).unwrap();
|
|
let (wif, sk, vk) = {
|
|
let w = other.wallet.read().unwrap();
|
|
let z = w.get_z_private_keys()[0].clone();
|
|
(w.get_t_secret_keys()[0].1.clone(), z.1, z.2)
|
|
};
|
|
|
|
// encrypt() also locks the wallet
|
|
lc.wallet.write().unwrap().encrypt("password".to_string()).unwrap();
|
|
for &unlocked in &[false, true] {
|
|
if unlocked {
|
|
lc.wallet.write().unwrap().unlock("password".to_string()).unwrap();
|
|
}
|
|
for r in vec![lc.do_import_sk(sk.clone(), 0), lc.do_import_tk(wif.clone(), 0), lc.do_import_key(sk.clone(), 0)] {
|
|
let e = r.err().expect("a private-key import must fail while the wallet is encrypted");
|
|
assert!(e.starts_with("Can't import a private key while the wallet is encrypted"), "{}", e);
|
|
assert!(!e.contains("locked") && !e.contains("decode"), "{}", e);
|
|
assert!(!e.contains(&wif) && !e.contains(&sk), "the error echoes the key");
|
|
}
|
|
assert_eq!(lc.wallet.read().unwrap().is_unlocked_for_spending(), unlocked);
|
|
}
|
|
|
|
// A viewing key still imports while encrypted (its save locks the wallet again).
|
|
assert!(lc.do_import_vk(vk, 0).is_ok());
|
|
assert!(!lc.wallet.read().unwrap().is_unlocked_for_spending());
|
|
|
|
assert!(lc.do_save().is_ok());
|
|
lc.wallet.write().unwrap().unlock("password".to_string()).unwrap();
|
|
assert_eq!(lc.do_seed_phrase().unwrap()["seed"], TEST_SEED.to_string());
|
|
}
|
|
|
|
// C245 Fix 2 (s2-D6a seam). A t-address job that panicked left the collector waiting forever, with sync_lock
|
|
// held, for a result that never came: the original sender stayed alive. Each job now reports exactly once (a
|
|
// panic is an Err) and the collector counts the reports. Runs under the 15 s watchdog.
|
|
#[test]
|
|
pub fn test_taddress_scan_job_panic_is_error() {
|
|
let (n, all_ok, one_err, one_panic) = crate::lightwallet::tests::within_watchdog("t-address scan", || {
|
|
let tmp = TempDir::new("lctest").unwrap();
|
|
let lc = LightClient::new(&main_config(&tmp), 0).unwrap();
|
|
lc.do_new_address("R").unwrap();
|
|
lc.do_new_address("R").unwrap();
|
|
let addrs = lc.wallet.read().unwrap().get_all_taddresses();
|
|
let pool = threadpool::ThreadPool::new(2);
|
|
let all_ok = lc.scan_taddress_txids_with(&pool, |_a: String| -> Result<(), String> { Ok(()) });
|
|
let a1 = addrs[1].clone();
|
|
let one_err = lc.scan_taddress_txids_with(&pool, move |a: String| -> Result<(), String> {
|
|
if a == a1 { Err("injected error".to_string()) } else { Ok(()) }
|
|
});
|
|
let a1 = addrs[1].clone();
|
|
let one_panic = lc.scan_taddress_txids_with(&pool, move |a: String| -> Result<(), String> {
|
|
if a == a1 {
|
|
panic!("injected t-address job panic");
|
|
}
|
|
Ok(())
|
|
});
|
|
(addrs.len(), all_ok, one_err, one_panic)
|
|
});
|
|
assert_eq!(n, 3);
|
|
assert_eq!(all_ok, Ok(vec![(); 3]));
|
|
assert_eq!(one_err, Err("injected error".to_string()));
|
|
assert_eq!(one_panic, Err("t-address scan job panicked".to_string()));
|
|
}
|
|
|
|
}
|