From 8eef38f94c8ab4cc8ab9fbcd9e3b7b08df2ebe27 Mon Sep 17 00:00:00 2001 From: Duke Leto Date: Sat, 18 Jan 2020 08:42:12 -0500 Subject: [PATCH 1/3] Fix broken sendmany RPC The sendmany RPC was broken in the 3.3.0 release due to a bad merge of upstream KMD code, resulting in this kind of error: ./src/hush-cli sendmany "" "{\"$TADDR1\": 0.0001, \"$TADDR2\": 0.0002, \"$TADDR3\": 0.0004}" error code: -3 error message: Amount is not a number or string No matter how many recipients you give, it will always "fall off the end" of the array, because it increments i twice per loop. That means AmountFromValue(sendTo[i]) is given an invalid amount and the RPC errors out, with no loss of funds. This is not a consensus bug and only nodes who want to use the sendmany RPC need to upgrade. Since GUI wallets do not use this RPC, it's most likely pools and exchanges that would want this. --- src/wallet/rpcwallet.cpp | 1 - 1 file changed, 1 deletion(-) diff --git a/src/wallet/rpcwallet.cpp b/src/wallet/rpcwallet.cpp index 6b145baf6..866e01d58 100644 --- a/src/wallet/rpcwallet.cpp +++ b/src/wallet/rpcwallet.cpp @@ -1529,7 +1529,6 @@ UniValue sendmany(const UniValue& params, bool fHelp, const CPubKey& mypk) CRecipient recipient = {scriptPubKey, nAmount, fSubtractFeeFromAmount}; vecSend.push_back(recipient); - i++; } EnsureWalletIsUnlocked(); From d4ac8162f609d0c0c9051319ff23c7a4f9cd5a84 Mon Sep 17 00:00:00 2001 From: Duke Leto Date: Sat, 18 Jan 2020 08:47:57 -0500 Subject: [PATCH 2/3] Bump version to 3.3.1 --- configure.ac | 2 +- src/clientversion.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/configure.ac b/configure.ac index 7e7fced10..b57e0969f 100644 --- a/configure.ac +++ b/configure.ac @@ -2,7 +2,7 @@ dnl require autoconf 2.60 (AS_ECHO/AS_ECHO_N) AC_PREREQ([2.60]) define(_CLIENT_VERSION_MAJOR, 3) define(_CLIENT_VERSION_MINOR, 3) -define(_CLIENT_VERSION_REVISION, 0) +define(_CLIENT_VERSION_REVISION, 1) define(_CLIENT_VERSION_BUILD, 50) define(_ZC_BUILD_VAL, m4_if(m4_eval(_CLIENT_VERSION_BUILD < 25), 1, m4_incr(_CLIENT_VERSION_BUILD), m4_eval(_CLIENT_VERSION_BUILD < 50), 1, m4_eval(_CLIENT_VERSION_BUILD - 24), m4_eval(_CLIENT_VERSION_BUILD == 50), 1, , m4_eval(_CLIENT_VERSION_BUILD - 50))) define(_CLIENT_VERSION_SUFFIX, m4_if(m4_eval(_CLIENT_VERSION_BUILD < 25), 1, _CLIENT_VERSION_REVISION-beta$1, m4_eval(_CLIENT_VERSION_BUILD < 50), 1, _CLIENT_VERSION_REVISION-rc$1, m4_eval(_CLIENT_VERSION_BUILD == 50), 1, _CLIENT_VERSION_REVISION, _CLIENT_VERSION_REVISION-$1))) diff --git a/src/clientversion.h b/src/clientversion.h index af0de70be..eaa792d62 100644 --- a/src/clientversion.h +++ b/src/clientversion.h @@ -34,7 +34,7 @@ // Must be kept in sync with configure.ac ! #define CLIENT_VERSION_MAJOR 3 #define CLIENT_VERSION_MINOR 3 -#define CLIENT_VERSION_REVISION 0 +#define CLIENT_VERSION_REVISION 1 #define CLIENT_VERSION_BUILD 50 //! Set to true for release, false for prerelease or test build From 4c39efccce744b6001773ed3c53e8ee987293a3b Mon Sep 17 00:00:00 2001 From: Duke Leto Date: Sat, 18 Jan 2020 09:07:22 -0500 Subject: [PATCH 3/3] Add/update unix manpages --- contrib/devtools/gen-manpages.sh | 1 + doc/man/hush-cli.1 | 91 +++++ doc/man/hush-tx.1 | 104 ++++++ doc/man/hushd.1 | 619 +++++++++++++++++++++++++++++++ 4 files changed, 815 insertions(+) create mode 100644 doc/man/hush-cli.1 create mode 100644 doc/man/hush-tx.1 create mode 100644 doc/man/hushd.1 diff --git a/contrib/devtools/gen-manpages.sh b/contrib/devtools/gen-manpages.sh index aaed44643..804caca7c 100755 --- a/contrib/devtools/gen-manpages.sh +++ b/contrib/devtools/gen-manpages.sh @@ -21,6 +21,7 @@ HUSHVER=$(./src/hushd --version|head -n2|tail -n1|cut -d' ' -f4|cut -d- -f1) echo "[COPYRIGHT]" > footer.h2m $HUSHD --version | sed -n '1!p' >> footer.h2m +echo "Generating man pages for Hush $HUSHVER" for cmd in $HUSHD $HUSHCLI $HUSHTX; do cmdname="${cmd##*/}" help2man -N --version-string=${HUSHVER} --include=footer.h2m -o ${MANDIR}/${cmdname}.1 ${cmd} diff --git a/doc/man/hush-cli.1 b/doc/man/hush-cli.1 new file mode 100644 index 000000000..a1be67812 --- /dev/null +++ b/doc/man/hush-cli.1 @@ -0,0 +1,91 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.10. +.TH HUSH-CLI "1" "January 2020" "hush-cli v3.3.1" "User Commands" +.SH NAME +hush-cli \- manual page for hush-cli v3.3.1 +.SH DESCRIPTION +Komodo RPC client version v3.3.1\-d4ac8162f +.PP +In order to ensure you are adequately protecting your privacy when using Hush, +please see . +.SS "Usage:" +.TP +komodo\-cli [options] [params] +Send command to Komodo +.TP +komodo\-cli [options] help +List commands +.TP +komodo\-cli [options] help +Get help for a command +.SH OPTIONS +.HP +\-? +.IP +This help message +.HP +\fB\-conf=\fR +.IP +Specify configuration file (default: komodo.conf) +.HP +\fB\-datadir=\fR +.IP +Specify data directory +.HP +\fB\-testnet\fR +.IP +Use the test network +.HP +\fB\-regtest\fR +.IP +Enter regression test mode, which uses a special chain in which blocks +can be solved instantly. This is intended for regression testing tools +and app development. +.HP +\fB\-rpcconnect=\fR +.IP +Send commands to node running on (default: 127.0.0.1) +.HP +\fB\-rpcport=\fR +.IP +Connect to JSON\-RPC on (default: 8232 or testnet: 18232) +.HP +\fB\-rpcwait\fR +.IP +Wait for RPC server to start +.HP +\fB\-rpcuser=\fR +.IP +Username for JSON\-RPC connections +.HP +\fB\-rpcpassword=\fR +.IP +Password for JSON\-RPC connections +.HP +\fB\-rpcclienttimeout=\fR +.IP +Timeout in seconds during HTTP requests, or 0 for no timeout. (default: +900) +.HP +\fB\-stdin\fR +.IP +Read extra arguments from standard input, one per line until EOF/Ctrl\-D +(recommended for sensitive information such as passphrases) +.SH COPYRIGHT +Hush Daemon version v3.3.1-d4ac8162f + +In order to ensure you are adequately protecting your privacy when using Hush, +please see . + +Copyright (C) 2009-2020 The Bitcoin Core Developers +Copyright (C) 2015-2020 The Zcash Developers +Copyright (C) 2015-2020 jl777 and SuperNET developers +Copyright (C) 2018-2020 The Hush developers + +This is experimental software!!! + +Distributed under the MIT software license, see the accompanying file COPYING +or . + +This product includes software developed by the OpenSSL Project for use in the +OpenSSL Toolkit and cryptographic software written +by Eric Young. diff --git a/doc/man/hush-tx.1 b/doc/man/hush-tx.1 new file mode 100644 index 000000000..b707fd059 --- /dev/null +++ b/doc/man/hush-tx.1 @@ -0,0 +1,104 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.10. +.TH HUSH-TX "1" "January 2020" "hush-tx v3.3.1" "User Commands" +.SH NAME +hush-tx \- manual page for hush-tx v3.3.1 +.SH DESCRIPTION +Hush komodo\-tx utility version v3.3.1\-d4ac8162f +.SS "Usage:" +.TP +komodo\-tx [options] [commands] +Update hex\-encoded zcash transaction +.TP +komodo\-tx [options] \fB\-create\fR [commands] +Create hex\-encoded zcash transaction +.SH OPTIONS +.HP +\-? +.IP +This help message +.HP +\fB\-create\fR +.IP +Create new, empty TX. +.HP +\fB\-json\fR +.IP +Select JSON output +.HP +\fB\-txid\fR +.IP +Output only the hex\-encoded transaction id of the resultant transaction. +.HP +\fB\-regtest\fR +.IP +Enter regression test mode, which uses a special chain in which blocks +can be solved instantly. +.HP +\fB\-testnet\fR +.IP +Use the test network +.PP +Commands: +.IP +delin=N +.IP +Delete input N from TX +.IP +delout=N +.IP +Delete output N from TX +.IP +in=TXID:VOUT(:SEQUENCE_NUMBER) +.IP +Add input to TX +.IP +locktime=N +.IP +Set TX lock time to N +.IP +nversion=N +.IP +Set TX version to N +.IP +outaddr=VALUE:ADDRESS +.IP +Add address\-based output to TX +.IP +outscript=VALUE:SCRIPT +.IP +Add raw script output to TX +.IP +sign=HEIGHT:SIGHASH\-FLAGS +.IP +Add zero or more signatures to transaction. This command requires JSON +registers:prevtxs=JSON object, privatekeys=JSON object. See +signrawtransaction docs for format of sighash flags, JSON objects. +.PP +Register Commands: +.IP +load=NAME:FILENAME +.IP +Load JSON file FILENAME into register NAME +.IP +set=NAME:JSON\-STRING +.IP +Set register NAME to given JSON\-STRING +.SH COPYRIGHT +Hush Daemon version v3.3.1-d4ac8162f + +In order to ensure you are adequately protecting your privacy when using Hush, +please see . + +Copyright (C) 2009-2020 The Bitcoin Core Developers +Copyright (C) 2015-2020 The Zcash Developers +Copyright (C) 2015-2020 jl777 and SuperNET developers +Copyright (C) 2018-2020 The Hush developers + +This is experimental software!!! + +Distributed under the MIT software license, see the accompanying file COPYING +or . + +This product includes software developed by the OpenSSL Project for use in the +OpenSSL Toolkit and cryptographic software written +by Eric Young. diff --git a/doc/man/hushd.1 b/doc/man/hushd.1 new file mode 100644 index 000000000..0c47538ea --- /dev/null +++ b/doc/man/hushd.1 @@ -0,0 +1,619 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.10. +.TH HUSHD "1" "January 2020" "hushd v3.3.1" "User Commands" +.SH NAME +hushd \- manual page for hushd v3.3.1 +.SH DESCRIPTION +Found binary: ./komodod +Hush Daemon version v3.3.1\-d4ac8162f +.PP +In order to ensure you are adequately protecting your privacy when using Hush, +please see . +.SS "Usage:" +.TP +komodod [options] +Start Hush\-flavored Komodo Daemon +.SH OPTIONS +.HP +\-? +.IP +This help message +.HP +\fB\-alerts\fR +.IP +Receive and display P2P network alerts (default: 1) +.HP +\fB\-alertnotify=\fR +.IP +Execute command when a relevant alert is received or we see a really +long fork (%s in cmd is replaced by message) +.HP +\fB\-blocknotify=\fR +.IP +Execute command when the best block changes (%s in cmd is replaced by +block hash) +.HP +\fB\-checkblocks=\fR +.IP +How many blocks to check at startup (default: 288, 0 = all) +.HP +\fB\-checklevel=\fR +.IP +How thorough the block verification of \fB\-checkblocks\fR is (0\-4, default: 3) +.HP +\fB\-clientname=\fR +.IP +Full node client name, default 'MagicBean' +.HP +\fB\-conf=\fR +.IP +Specify configuration file (default: komodo.conf) +.HP +\fB\-daemon\fR +.IP +Run in the background as a daemon and accept commands +.HP +\fB\-datadir=\fR +.IP +Specify data directory +.HP +\fB\-exportdir=\fR +.IP +Specify directory to be used when exporting data +.HP +\fB\-dbcache=\fR +.IP +Set database cache size in megabytes (4 to 16384, default: 450) +.HP +\fB\-loadblock=\fR +.IP +Imports blocks from external blk000??.dat file on startup +.HP +\fB\-maxorphantx=\fR +.IP +Keep at most unconnectable transactions in memory (default: 100) +.HP +\fB\-mempooltxinputlimit=\fR +.IP +[DEPRECATED FROM OVERWINTER] Set the maximum number of transparent +inputs in a transaction that the mempool will accept (default: 0 = no +limit applied) +.HP +\fB\-par=\fR +.IP +Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 = +leave that many cores free, default: 0) +.HP +\fB\-pid=\fR +.IP +Specify pid file (default: komodod.pid) +.HP +\fB\-prune=\fR +.IP +Reduce storage requirements by pruning (deleting) old blocks. This mode +disables wallet support and is incompatible with \fB\-txindex\fR. Warning: +Reverting this setting requires re\-downloading the entire blockchain. +(default: 0 = disable pruning blocks, >550 = target size in MiB to use +for block files) +.HP +\fB\-reindex\fR +.IP +Rebuild block chain index from current blk000??.dat files on startup +.HP +\fB\-sysperms\fR +.IP +Create new files with system default permissions, instead of umask 077 +(only effective with disabled wallet functionality) +.HP +\fB\-txindex\fR +.IP +Maintain a full transaction index, used by the getrawtransaction rpc +call (default: 0) +.HP +\fB\-addressindex\fR +.IP +Maintain a full address index, used to query for the balance, txids and +unspent outputs for addresses (default: 1) +.HP +\fB\-timestampindex\fR +.IP +Maintain a timestamp index for block hashes, used to query blocks hashes +by a range of timestamps (default: 0) +.HP +\fB\-spentindex\fR +.IP +Maintain a full spent index, used to query the spending txid and input +index for an outpoint (default: 1) +.HP +\fB\-zindex\fR +.IP +Maintain extra statistics about shielded transactions and payments +(default: 0) +.PP +Connection options: +.HP +\fB\-addnode=\fR +.IP +Add a node to connect to and attempt to keep the connection open +.HP +\fB\-banscore=\fR +.IP +Threshold for disconnecting misbehaving peers (default: 100) +.HP +\fB\-bantime=\fR +.IP +Number of seconds to keep misbehaving peers from reconnecting (default: +86400) +.HP +\fB\-bind=\fR +.IP +Bind to given address and always listen on it. Use [host]:port notation +for IPv6 +.HP +\fB\-connect=\fR +.IP +Connect only to the specified node(s) +.HP +\fB\-discover\fR +.IP +Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR +or \fB\-proxy\fR) +.HP +\fB\-dns\fR +.IP +Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1) +.HP +\fB\-dnsseed\fR +.IP +Query for peer addresses via DNS lookup, if low on addresses (default: 1 +unless \fB\-connect\fR) +.HP +\fB\-externalip=\fR +.IP +Specify your own public address +.HP +\fB\-forcednsseed\fR +.IP +Always query for peer addresses via DNS lookup (default: 0) +.HP +\fB\-listen\fR +.IP +Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR) +.HP +\fB\-listenonion\fR +.IP +Automatically create Tor hidden service (default: 1) +.HP +\fB\-maxconnections=\fR +.IP +Maintain at most connections to peers (default: 384) +.HP +\fB\-maxreceivebuffer=\fR +.IP +Maximum per\-connection receive buffer, *1000 bytes (default: 5000) +.HP +\fB\-maxsendbuffer=\fR +.IP +Maximum per\-connection send buffer, *1000 bytes (default: 1000) +.HP +\fB\-onion=\fR +.IP +Use separate SOCKS5 proxy to reach peers via Tor hidden services +(default: \fB\-proxy\fR) +.HP +\fB\-onlynet=\fR +.IP +Only connect to nodes in network (ipv4, ipv6 or onion) +.HP +\fB\-permitbaremultisig\fR +.IP +Relay non\-P2SH multisig (default: 1) +.HP +\fB\-peerbloomfilters\fR +.IP +Support filtering of blocks and transaction with Bloom filters (default: +1) +.HP +\fB\-port=\fR +.IP +Listen for connections on (default: 7770 or testnet: 17770) +.HP +\fB\-proxy=\fR +.IP +Connect through SOCKS5 proxy +.HP +\fB\-proxyrandomize\fR +.IP +Randomize credentials for every proxy connection. This enables Tor +stream isolation (default: 1) +.HP +\fB\-seednode=\fR +.IP +Connect to a node to retrieve peer addresses, and disconnect +.HP +\fB\-timeout=\fR +.IP +Specify connection timeout in milliseconds (minimum: 1, default: 5000) +.HP +\fB\-torcontrol=\fR: +.IP +Tor control port to use if onion listening enabled (default: +127.0.0.1:9051) +.HP +\fB\-torpassword=\fR +.IP +Tor control port password (default: empty) +.HP +\fB\-whitebind=\fR +.IP +Bind to given address and whitelist peers connecting to it. Use +[host]:port notation for IPv6 +.HP +\fB\-whitelist=\fR +.IP +Whitelist peers connecting from the given netmask or IP address. Can be +specified multiple times. Whitelisted peers cannot be DoS banned and +their transactions are always relayed, even if they are already in the +mempool, useful e.g. for a gateway +.PP +Wallet options: +.HP +\fB\-disablewallet\fR +.IP +Do not load the wallet and disable wallet RPC calls +.HP +\fB\-keypool=\fR +.IP +Set key pool size to (default: 100) +.HP +\fB\-paytxfee=\fR +.IP +Fee (in KMD/kB) to add to transactions you send (default: 0.00) +.HP +\fB\-rescan\fR +.IP +Rescan the block chain for missing wallet transactions on startup +.HP +\fB\-salvagewallet\fR +.IP +Attempt to recover private keys from a corrupt wallet.dat on startup +.HP +\fB\-sendfreetransactions\fR +.IP +Send transactions as zero\-fee transactions if possible (default: 0) +.HP +\fB\-spendzeroconfchange\fR +.IP +Spend unconfirmed change when sending transactions (default: 1) +.HP +\fB\-txconfirmtarget=\fR +.IP +If paytxfee is not set, include enough fee so transactions begin +confirmation on average within n blocks (default: 2) +.HP +\fB\-txexpirydelta\fR +.IP +Set the number of blocks after which a transaction that has not been +mined will become invalid (default: 200) +.HP +\fB\-maxtxfee=\fR +.IP +Maximum total fees (in KMD) to use in a single wallet transaction; +setting this too low may abort large transactions (default: 0.10) +.HP +\fB\-upgradewallet\fR +.IP +Upgrade wallet to latest format on startup +.HP +\fB\-wallet=\fR +.IP +Specify wallet file (within data directory) (default: wallet.dat) +.HP +\fB\-walletbroadcast\fR +.IP +Make the wallet broadcast transactions (default: 1) +.HP +\fB\-walletnotify=\fR +.IP +Execute command when a wallet transaction changes (%s in cmd is replaced +by TxID) +.HP +\fB\-whitelistaddress=\fR +.IP +Enable the wallet filter for notary nodes and add one Raddress to the +whitelist of the wallet filter. If \fB\-whitelistaddress=\fR is used, then the +wallet filter is automatically activated. Several Raddresses can be +defined using several \fB\-whitelistaddress=\fR (similar to \fB\-addnode\fR). The +wallet filter will filter the utxo to only ones coming from my own +Raddress (derived from pubkey) and each Raddress defined using +\fB\-whitelistaddress=\fR this option is mostly for Notary Nodes). +.HP +\fB\-zapwallettxes=\fR +.IP +Delete all wallet transactions and only recover those parts of the +blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g. +account owner and payment request information, 2 = drop tx meta data) +.PP +ZeroMQ notification options: +.HP +\fB\-zmqpubhashblock=\fR
+.IP +Enable publish hash block in
+.HP +\fB\-zmqpubhashtx=\fR
+.IP +Enable publish hash transaction in
+.HP +\fB\-zmqpubrawblock=\fR
+.IP +Enable publish raw block in
+.HP +\fB\-zmqpubrawtx=\fR
+.IP +Enable publish raw transaction in
+.PP +Debugging/Testing options: +.HP +\fB\-debug=\fR +.IP +Output debugging information (default: 0, supplying is +optional). If is not supplied or if = 1, output +all debugging information. can be: addrman, alert, bench, +coindb, db, estimatefee, http, libevent, lock, mempool, net, +partitioncheck, pow, proxy, prune, rand, reindex, rpc, selectcoins, tor, +zmq, zrpc, zrpcunsafe (implies zrpc). +.HP +\fB\-experimentalfeatures\fR +.IP +Enable use of experimental features +.HP +\fB\-help\-debug\fR +.IP +Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR) +.HP +\fB\-logips\fR +.IP +Include IP addresses in debug output (default: 0) +.HP +\fB\-logtimestamps\fR +.IP +Prepend debug output with timestamp (default: 1) +.HP +\fB\-minrelaytxfee=\fR +.IP +Fees (in KMD/kB) smaller than this are considered zero fee for relaying +(default: 0.000001) +.HP +\fB\-printtoconsole\fR +.IP +Send trace/debug info to console instead of debug.log file +.HP +\fB\-shrinkdebugfile\fR +.IP +Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR) +.HP +\fB\-testnet\fR +.IP +Use the test network +.PP +Node relay options: +.HP +\fB\-datacarrier\fR +.IP +Relay and mine data carrier transactions (default: 1) +.HP +\fB\-datacarriersize\fR +.IP +Maximum size of data in data carrier transactions we relay and mine +(default: 8192) +.PP +Block creation options: +.HP +\fB\-blockminsize=\fR +.IP +Set minimum block size in bytes (default: 0) +.HP +\fB\-blockmaxsize=\fR +.IP +Set maximum block size in bytes (default: 2000000) +.HP +\fB\-blockprioritysize=\fR +.IP +Set maximum size of high\-priority/low\-fee transactions in bytes +(default: 1000000) +.PP +Mining options: +.HP +\fB\-gen\fR +.IP +Mine/generate coins (default: 0) +.HP +\fB\-genproclimit=\fR +.IP +Set the number of threads for coin mining if enabled (\fB\-1\fR = all cores, +default: 0) +.HP +\fB\-equihashsolver=\fR +.IP +Specify the Equihash solver to be used if enabled (default: "default") +.HP +\fB\-mineraddress=\fR +.IP +Send mined coins to a specific single address +.HP +\fB\-minetolocalwallet\fR +.IP +Require that mined blocks use a coinbase address in the local wallet +(default: 1) +.PP +RPC server options: +.HP +\fB\-server\fR +.IP +Accept command line and JSON\-RPC commands +.HP +\fB\-rest\fR +.IP +Accept public REST requests (default: 0) +.HP +\fB\-rpcbind=\fR +.IP +Bind to given address to listen for JSON\-RPC connections. Use +[host]:port notation for IPv6. This option can be specified multiple +times (default: bind to all interfaces) +.HP +\fB\-rpcuser=\fR +.IP +Username for JSON\-RPC connections +.HP +\fB\-rpcpassword=\fR +.IP +Password for JSON\-RPC connections +.HP +\fB\-rpcport=\fR +.IP +Listen for JSON\-RPC connections on (default: 7771 or testnet: +17771) +.HP +\fB\-rpcallowip=\fR +.IP +Allow JSON\-RPC connections from specified source. Valid for are a +single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) +or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified +multiple times +.HP +\fB\-rpcthreads=\fR +.IP +Set the number of threads to service RPC calls (default: 4) +.PP +Metrics Options (only if \fB\-daemon\fR and \fB\-printtoconsole\fR are not set): +.HP +\fB\-showmetrics\fR +.IP +Show metrics on stdout (default: 1 if running in a console, 0 otherwise) +.HP +\fB\-metricsui\fR +.IP +Set to 1 for a persistent metrics screen, 0 for sequential metrics +output (default: 1 if running in a console, 0 otherwise) +.HP +\fB\-metricsrefreshtime\fR +.IP +Number of seconds between metrics refreshes (default: 1 if running in a +console, 600 otherwise) +.PP +Komodo Asset Chain options: +.HP +\fB\-ac_algo\fR +.IP +Choose PoW mining algorithm, default is Equihash +.HP +\fB\-ac_blocktime\fR +.IP +Block time in seconds, default is 60 +.HP +\fB\-ac_cc\fR +.IP +Cryptoconditions, default 0 +.HP +\fB\-ac_beam\fR +.IP +BEAM integration +.HP +\fB\-ac_coda\fR +.IP +CODA integration +.HP +\fB\-ac_cclib\fR +.IP +Cryptoconditions dynamicly loadable library +.HP +\fB\-ac_ccenable\fR +.IP +Cryptoconditions to enable +.HP +\fB\-ac_ccactivate\fR +.IP +Block height to enable Cryptoconditions +.HP +\fB\-ac_decay\fR +.IP +Percentage of block reward decrease at each halving +.HP +\fB\-ac_end\fR +.IP +Block height at which block rewards will end +.HP +\fB\-ac_eras\fR +.IP +Block reward eras +.HP +\fB\-ac_founders\fR +.IP +Number of blocks between founders reward payouts +.HP +\fB\-ac_halving\fR +.IP +Number of blocks between each block reward halving +.HP +\fB\-ac_name\fR +.IP +Name of asset chain +.HP +\fB\-ac_notarypay\fR +.IP +Pay notaries, default 0 +.HP +\fB\-ac_perc\fR +.IP +Percentage of block rewards paid to the founder +.HP +\fB\-ac_private\fR +.IP +Shielded transactions only (except coinbase + notaries), default is 0 +.HP +\fB\-ac_pubkey\fR +.IP +Public key for receiving payments on the network +.HP +\fB\-ac_public\fR +.IP +Transparent transactions only, default 0 +.HP +\fB\-ac_reward\fR +.IP +Block reward in satoshis, default is 0 +.HP +\fB\-ac_sapling\fR +.IP +Sapling activation block height +.HP +\fB\-ac_script\fR +.IP +P2SH/multisig address to receive founders rewards +.HP +\fB\-ac_supply\fR +.IP +Starting supply, default is 0 +.HP +\fB\-ac_txpow\fR +.IP +Enforce transaction\-rate limit, default 0 +.SH COPYRIGHT +Hush Daemon version v3.3.1-d4ac8162f + +In order to ensure you are adequately protecting your privacy when using Hush, +please see . + +Copyright (C) 2009-2020 The Bitcoin Core Developers +Copyright (C) 2015-2020 The Zcash Developers +Copyright (C) 2015-2020 jl777 and SuperNET developers +Copyright (C) 2018-2020 The Hush developers + +This is experimental software!!! + +Distributed under the MIT software license, see the accompanying file COPYING +or . + +This product includes software developed by the OpenSSL Project for use in the +OpenSSL Toolkit and cryptographic software written +by Eric Young.