change zcashd reference, update example conf

contrib/debian/examples/komodo.conf

@@ -0,0 +1,140 @@
+##
+## komodo.conf configuration file. Lines beginning with # are comments.
+##
+
+# Network-related settings:
+
+# Run a regression test network
+#regtest=0
+
+# Connect via a SOCKS5 proxy
+#proxy=127.0.0.1:9050
+
+# Bind to given address and always listen on it. Use [host]:port notation for IPv6
+#bind=<addr>
+
+# Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
+#whitebind=<addr>
+
+##############################################################
+##            Quick Primer on addnode vs connect            ##
+##  Let's say for instance you use addnode=4.2.2.4          ##
+##  addnode will connect you to and tell you about the      ##
+##    nodes connected to 4.2.2.4.  In addition it will tell ##
+##    the other nodes connected to it that you exist so     ##
+##    they can connect to you.                              ##
+##  connect will not do the above when you 'connect' to it. ##
+##    It will *only* connect you to 4.2.2.4 and no one else.##
+##                                                          ##
+##  So if you're behind a firewall, or have other problems  ##
+##  finding nodes, add some using 'addnode'.                ##
+##                                                          ##
+##  If you want to stay private, use 'connect' to only      ##
+##  connect to "trusted" nodes.                             ##
+##                                                          ##
+##  If you run multiple nodes on a LAN, there's no need for ##
+##  all of them to open lots of connections.  Instead       ##
+##  'connect' them all to one node that is port forwarded   ##
+##  and has lots of connections.                            ##
+##       Thanks goes to [Noodle] on Freenode.               ##
+##############################################################
+
+# Use as many addnode= settings as you like to connect to specific peers
+#addnode=69.164.218.197
+#addnode=10.0.0.2:8233
+
+# Alternatively use as many connect= settings as you like to connect ONLY to specific peers
+#connect=69.164.218.197
+#connect=10.0.0.1:8233
+
+# Listening mode, enabled by default except when 'connect' is being used
+#listen=1
+
+# Maximum number of inbound+outbound connections.
+#maxconnections=
+
+#
+# JSON-RPC options (for controlling a running Komodo/komodod process)
+#
+
+# server=1 tells komodod to accept JSON-RPC commands (set as default if not specified)
+#server=1
+
+# Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
+# This option can be specified multiple times (default: bind to all interfaces)
+#rpcbind=<addr>
+
+# You must set rpcuser and rpcpassword to secure the JSON-RPC api
+#rpcuser=Ulysses
+#rpcpassword=YourSuperGreatPasswordNumber_DO_NOT_USE_THIS_OR_YOU_WILL_GET_ROBBED_385593
+
+# How many seconds komodo will wait for a complete RPC HTTP request.
+# after the HTTP connection is established. 
+#rpcclienttimeout=30
+
+# By default, only RPC connections from localhost are allowed.
+# Specify as many rpcallowip= settings as you like to allow connections from other hosts,
+# either as a single IPv4/IPv6 or with a subnet specification.
+
+# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
+# because the rpcpassword is transmitted over the network unencrypted and also because anyone 
+# that can authenticate on the RPC port can steal your keys + take over the account running komodod
+# For more information see https://github.com/zcash/zcash/issues/1497
+
+#rpcallowip=10.1.1.34/255.255.255.0
+#rpcallowip=1.2.3.4/24
+#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
+
+# Listen for RPC connections on this TCP port:
+#rpcport=8232
+
+# You can use Komodo or komodod to send commands to Komodo/komodod
+# running on another host using this option:
+#rpcconnect=127.0.0.1
+
+# Transaction Fee
+
+# Send transactions as zero-fee transactions if possible (default: 0)
+#sendfreetransactions=0
+
+# Create transactions that have enough fees (or priority) so they are likely to # begin confirmation within n blocks (default: 1).
+# This setting is overridden by the -paytxfee option.
+#txconfirmtarget=n
+
+# Miscellaneous options
+
+# Enable attempt to mine komodo.
+#gen=0
+
+# Set the number of threads to be used for mining komodo (-1 = all cores).
+#genproclimit=1
+
+# Specify a different Equihash solver (e.g. "tromp") to try to mine komodo
+# faster when gen=1.
+#equihashsolver=default
+
+# Pre-generate this many public/private key pairs, so wallet backups will be valid for
+# both prior transactions and several dozen future transactions.
+#keypool=100
+
+# Pay an optional transaction fee every time you send komodo.  Transactions with fees
+# are more likely than free transactions to be included in generated blocks, so may
+# be validated sooner. This setting does not affect private transactions created with 
+# 'z_sendmany'.
+#paytxfee=0.00
+
+#Rewind the chain to specific block height. This is useful for creating snapshots at a given block height.
+#rewind=777777
+
+#Stop the chain a specific block height. This is useful for creating snapshots at a given block height.
+#stopat=1000000
+
+#Set an address to use as change address for all transactions. This value must be set to a 33 byte pubkey. All mined coins will also be sent to this address.
+#pubkey=027dc7b5cfb5efca96674b45e9fda18df069d040b9fd9ff32c35df56005e330392
+
+#Forfeit all user rewards to miners. Set this to explicitly not claim user rewards.
+#exchange=1
+
+#Donate all user rewards to a a specific address. This value must be set to a 33 byte pubkey.
+#donation=027dc7b5cfb5efca96674b45e9fda18df069d040b9fd9ff32c35df56005e330392
+

src/bitcoind.cpp

@@ -144,21 +144,21 @@ bool AppInit(int argc, char* argv[])
             ReadConfigFile(mapArgs, mapMultiArgs);
         } catch (const missing_zcash_conf& e) {
             fprintf(stderr,
-                (_("Before starting zcashd, you need to create a configuration file:\n"
+                (_("Before starting komodod, you need to create a configuration file:\n"
                    "%s\n"
                    "It can be completely empty! That indicates you are happy with the default\n"
-                   "configuration of zcashd. But requiring a configuration file to start ensures\n"
+                   "configuration of komodod. But requiring a configuration file to start ensures\n"
-                   "that zcashd won't accidentally compromise your privacy if there was a default\n"
+                   "that komodod won't accidentally compromise your privacy if there was a default\n"
                    "option you needed to change.\n"
                    "\n"
                    "You can look at the example configuration file for suggestions of default\n"
                    "options that you may want to change. It should be in one of these locations,\n"
-                   "depending on how you installed Zcash:\n") +
+                   "depending on how you installed Komodo:\n") +
                  _("- Source code:  %s\n"
                    "- .deb package: %s\n")).c_str(),
                 GetConfigFile().string().c_str(),
-                "contrib/debian/examples/zcash.conf",
+                "contrib/debian/examples/komodo.conf",
-                "/usr/share/doc/zcash/examples/zcash.conf");
+                "/usr/share/doc/komodo/examples/komodo.conf");
             return false;
         } catch (const std::exception& e) {
             fprintf(stderr,"Error reading configuration file: %s\n", e.what());