diff --git a/doc/man/Makefile.am b/doc/man/Makefile.am
index 98a1278d8..13be3322e 100644
--- a/doc/man/Makefile.am
+++ b/doc/man/Makefile.am
@@ -1 +1 @@
-dist_man1_MANS=komodod.1 komodo-cli.1 komodo-tx.1
+dist_man1_MANS=hushd.1 hush-cli.1 hush-tx.1
diff --git a/doc/man/komodo-cli.1 b/doc/man/komodo-cli.1
deleted file mode 100644
index b7d195400..000000000
--- a/doc/man/komodo-cli.1
+++ /dev/null
@@ -1,90 +0,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.10.
-.TH KOMODO-CLI "1" "December 2019" "komodo-cli v3.3.0" "User Commands"
-.SH NAME
-komodo-cli \- manual page for komodo-cli v3.3.0
-.SH DESCRIPTION
-Komodo RPC client version v3.3.0\-bde7744d9
-.PP
-In order to ensure you are adequately protecting your privacy when using Hush,
-please see <https://myhush.org/security/>.
-.SS "Usage:"
-.TP
-komodo\-cli [options] <command> [params]
-Send command to Komodo
-.TP
-komodo\-cli [options] help
-List commands
-.TP
-komodo\-cli [options] help <command>
-Get help for a command
-.SH OPTIONS
-.HP
-\-?
-.IP
-This help message
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file (default: komodo.conf)
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-testnet\fR
-.IP
-Use the test network
-.HP
-\fB\-regtest\fR
-.IP
-Enter regression test mode, which uses a special chain in which blocks
-can be solved instantly. This is intended for regression testing tools
-and app development.
-.HP
-\fB\-rpcconnect=\fR<ip>
-.IP
-Send commands to node running on <ip> (default: 127.0.0.1)
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Connect to JSON\-RPC on <port> (default: 8232 or testnet: 18232)
-.HP
-\fB\-rpcwait\fR
-.IP
-Wait for RPC server to start
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcclienttimeout=\fR<n>
-.IP
-Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
-900)
-.HP
-\fB\-stdin\fR
-.IP
-Read extra arguments from standard input, one per line until EOF/Ctrl\-D
-(recommended for sensitive information such as passphrases)
-.SH COPYRIGHT
-
-In order to ensure you are adequately protecting your privacy when using Hush,
-please see <https://myhush.org/security/>.
-
-Copyright (C) 2009-2019 The Bitcoin Core Developers
-Copyright (C) 2015-2019 The Zcash Developers
-Copyright (C) 2015-2019 jl777 and SuperNET developers
-Copyright (C) 2018-2019 The Hush developers
-
-This is experimental software!!!
-
-Distributed under the MIT software license, see the accompanying file COPYING
-or <http://www.opensource.org/licenses/mit-license.php>.
-
-This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
-by Eric Young.
diff --git a/doc/man/komodo-tx.1 b/doc/man/komodo-tx.1
deleted file mode 100644
index 511ce5158..000000000
--- a/doc/man/komodo-tx.1
+++ /dev/null
@@ -1,103 +0,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.10.
-.TH KOMODO-TX "1" "December 2019" "komodo-tx v3.3.0" "User Commands"
-.SH NAME
-komodo-tx \- manual page for komodo-tx v3.3.0
-.SH DESCRIPTION
-Hush komodo\-tx utility version v3.3.0\-bde7744d9
-.SS "Usage:"
-.TP
-komodo\-tx [options] <hex\-tx> [commands]
-Update hex\-encoded zcash transaction
-.TP
-komodo\-tx [options] \fB\-create\fR [commands]
-Create hex\-encoded zcash transaction
-.SH OPTIONS
-.HP
-\-?
-.IP
-This help message
-.HP
-\fB\-create\fR
-.IP
-Create new, empty TX.
-.HP
-\fB\-json\fR
-.IP
-Select JSON output
-.HP
-\fB\-txid\fR
-.IP
-Output only the hex\-encoded transaction id of the resultant transaction.
-.HP
-\fB\-regtest\fR
-.IP
-Enter regression test mode, which uses a special chain in which blocks
-can be solved instantly.
-.HP
-\fB\-testnet\fR
-.IP
-Use the test network
-.PP
-Commands:
-.IP
-delin=N
-.IP
-Delete input N from TX
-.IP
-delout=N
-.IP
-Delete output N from TX
-.IP
-in=TXID:VOUT(:SEQUENCE_NUMBER)
-.IP
-Add input to TX
-.IP
-locktime=N
-.IP
-Set TX lock time to N
-.IP
-nversion=N
-.IP
-Set TX version to N
-.IP
-outaddr=VALUE:ADDRESS
-.IP
-Add address\-based output to TX
-.IP
-outscript=VALUE:SCRIPT
-.IP
-Add raw script output to TX
-.IP
-sign=HEIGHT:SIGHASH\-FLAGS
-.IP
-Add zero or more signatures to transaction. This command requires JSON
-registers:prevtxs=JSON object, privatekeys=JSON object. See
-signrawtransaction docs for format of sighash flags, JSON objects.
-.PP
-Register Commands:
-.IP
-load=NAME:FILENAME
-.IP
-Load JSON file FILENAME into register NAME
-.IP
-set=NAME:JSON\-STRING
-.IP
-Set register NAME to given JSON\-STRING
-.SH COPYRIGHT
-
-In order to ensure you are adequately protecting your privacy when using Hush,
-please see <https://myhush.org/security/>.
-
-Copyright (C) 2009-2019 The Bitcoin Core Developers
-Copyright (C) 2015-2019 The Zcash Developers
-Copyright (C) 2015-2019 jl777 and SuperNET developers
-Copyright (C) 2018-2019 The Hush developers
-
-This is experimental software!!!
-
-Distributed under the MIT software license, see the accompanying file COPYING
-or <http://www.opensource.org/licenses/mit-license.php>.
-
-This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
-by Eric Young.
diff --git a/doc/man/komodod.1 b/doc/man/komodod.1
deleted file mode 100644
index 9f7c9b6f1..000000000
--- a/doc/man/komodod.1
+++ /dev/null
@@ -1,637 +0,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.10.
-.TH KOMODOD "1" "December 2019" "komodod v3.3.0" "User Commands"
-.SH NAME
-komodod \- manual page for komodod v3.3.0
-.SH DESCRIPTION
-Hush Daemon version v3.3.0\-bde7744d9
-.PP
-In order to ensure you are adequately protecting your privacy when using Hush,
-please see <https://myhush.org/security/>.
-.SS "Usage:"
-.TP
-komodod [options]
-Start Hush\-flavored Komodo Daemon
-.SH OPTIONS
-.HP
-\-?
-.IP
-This help message
-.HP
-\fB\-alerts\fR
-.IP
-Receive and display P2P network alerts (default: 1)
-.HP
-\fB\-alertnotify=\fR<cmd>
-.IP
-Execute command when a relevant alert is received or we see a really
-long fork (%s in cmd is replaced by message)
-.HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
-\fB\-checkblocks=\fR<n>
-.IP
-How many blocks to check at startup (default: 288, 0 = all)
-.HP
-\fB\-checklevel=\fR<n>
-.IP
-How thorough the block verification of \fB\-checkblocks\fR is (0\-4, default: 3)
-.HP
-\fB\-clientname=\fR<SomeName>
-.IP
-Full node client name, default 'MagicBean'
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file (default: komodo.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-exportdir=\fR<dir>
-.IP
-Specify directory to be used when exporting data
-.HP
-\fB\-dbcache=\fR<n>
-.IP
-Set database cache size in megabytes (4 to 16384, default: 450)
-.HP
-\fB\-loadblock=\fR<file>
-.IP
-Imports blocks from external blk000??.dat file on startup
-.HP
-\fB\-maxorphantx=\fR<n>
-.IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
-.HP
-\fB\-mempooltxinputlimit=\fR<n>
-.IP
-[DEPRECATED FROM OVERWINTER] Set the maximum number of transparent
-inputs in a transaction that the mempool will accept (default: 0 = no
-limit applied)
-.HP
-\fB\-par=\fR<n>
-.IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
-leave that many cores free, default: 0)
-.HP
-\fB\-pid=\fR<file>
-.IP
-Specify pid file (default: komodod.pid)
-.HP
-\fB\-prune=\fR<n>
-.IP
-Reduce storage requirements by pruning (deleting) old blocks. This mode
-disables wallet support and is incompatible with \fB\-txindex\fR. Warning:
-Reverting this setting requires re\-downloading the entire blockchain.
-(default: 0 = disable pruning blocks, >550 = target size in MiB to use
-for block files)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild block chain index from current blk000??.dat files on startup
-.HP
-\fB\-sysperms\fR
-.IP
-Create new files with system default permissions, instead of umask 077
-(only effective with disabled wallet functionality)
-.HP
-\fB\-txindex\fR
-.IP
-Maintain a full transaction index, used by the getrawtransaction rpc
-call (default: 0)
-.HP
-\fB\-addressindex\fR
-.IP
-Maintain a full address index, used to query for the balance, txids and
-unspent outputs for addresses (default: 0)
-.HP
-\fB\-timestampindex\fR
-.IP
-Maintain a timestamp index for block hashes, used to query blocks hashes
-by a range of timestamps (default: 0)
-.HP
-\fB\-spentindex\fR
-.IP
-Maintain a full spent index, used to query the spending txid and input
-index for an outpoint (default: 0)
-.HP
-\fB\-zindex\fR
-.IP
-Maintain extra statistics about shielded transactions and payments
-(default: 0)
-.PP
-Connection options:
-.HP
-\fB\-addnode=\fR<ip>
-.IP
-Add a node to connect to and attempt to keep the connection open
-.HP
-\fB\-banscore=\fR<n>
-.IP
-Threshold for disconnecting misbehaving peers (default: 100)
-.HP
-\fB\-bantime=\fR<n>
-.IP
-Number of seconds to keep misbehaving peers from reconnecting (default:
-86400)
-.HP
-\fB\-bind=\fR<addr>
-.IP
-Bind to given address and always listen on it. Use [host]:port notation
-for IPv6
-.HP
-\fB\-connect=\fR<ip>
-.IP
-Connect only to the specified node(s)
-.HP
-\fB\-discover\fR
-.IP
-Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
-or \fB\-proxy\fR)
-.HP
-\fB\-dns\fR
-.IP
-Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
-.HP
-\fB\-dnsseed\fR
-.IP
-Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR)
-.HP
-\fB\-externalip=\fR<ip>
-.IP
-Specify your own public address
-.HP
-\fB\-forcednsseed\fR
-.IP
-Always query for peer addresses via DNS lookup (default: 0)
-.HP
-\fB\-listen\fR
-.IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
-.HP
-\fB\-listenonion\fR
-.IP
-Automatically create Tor hidden service (default: 1)
-.HP
-\fB\-maxconnections=\fR<n>
-.IP
-Maintain at most <n> connections to peers (default: 384)
-.HP
-\fB\-maxreceivebuffer=\fR<n>
-.IP
-Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
-.HP
-\fB\-maxsendbuffer=\fR<n>
-.IP
-Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
-.HP
-\fB\-onion=\fR<ip:port>
-.IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services
-(default: \fB\-proxy\fR)
-.HP
-\fB\-onlynet=\fR<net>
-.IP
-Only connect to nodes in network <net> (ipv4, ipv6 or onion)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
-\fB\-peerbloomfilters\fR
-.IP
-Support filtering of blocks and transaction with Bloom filters (default:
-1)
-.HP
-\fB\-port=\fR<port>
-.IP
-Listen for connections on <port> (default: 7770 or testnet: 17770)
-.HP
-\fB\-proxy=\fR<ip:port>
-.IP
-Connect through SOCKS5 proxy
-.HP
-\fB\-proxyrandomize\fR
-.IP
-Randomize credentials for every proxy connection. This enables Tor
-stream isolation (default: 1)
-.HP
-\fB\-seednode=\fR<ip>
-.IP
-Connect to a node to retrieve peer addresses, and disconnect
-.HP
-\fB\-timeout=\fR<n>
-.IP
-Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-.HP
-\fB\-torcontrol=\fR<ip>:<port>
-.IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
-.HP
-\fB\-torpassword=\fR<pass>
-.IP
-Tor control port password (default: empty)
-.HP
-\fB\-whitebind=\fR<addr>
-.IP
-Bind to given address and whitelist peers connecting to it. Use
-[host]:port notation for IPv6
-.HP
-\fB\-whitelist=\fR<netmask>
-.IP
-Whitelist peers connecting from the given netmask or IP address. Can be
-specified multiple times. Whitelisted peers cannot be DoS banned and
-their transactions are always relayed, even if they are already in the
-mempool, useful e.g. for a gateway
-.PP
-Wallet options:
-.HP
-\fB\-disablewallet\fR
-.IP
-Do not load the wallet and disable wallet RPC calls
-.HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 100)
-.HP
-\fB\-paytxfee=\fR<amt>
-.IP
-Fee (in KMD/kB) to add to transactions you send (default: 0.00)
-.HP
-\fB\-rescan\fR
-.IP
-Rescan the block chain for missing wallet transactions on startup
-.HP
-\fB\-salvagewallet\fR
-.IP
-Attempt to recover private keys from a corrupt wallet.dat on startup
-.HP
-\fB\-sendfreetransactions\fR
-.IP
-Send transactions as zero\-fee transactions if possible (default: 0)
-.HP
-\fB\-spendzeroconfchange\fR
-.IP
-Spend unconfirmed change when sending transactions (default: 1)
-.HP
-\fB\-txconfirmtarget=\fR<n>
-.IP
-If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 2)
-.HP
-\fB\-txexpirydelta\fR
-.IP
-Set the number of blocks after which a transaction that has not been
-mined will become invalid (default: 200)
-.HP
-\fB\-maxtxfee=\fR<amt>
-.IP
-Maximum total fees (in KMD) to use in a single wallet transaction;
-setting this too low may abort large transactions (default: 0.10)
-.HP
-\fB\-upgradewallet\fR
-.IP
-Upgrade wallet to latest format on startup
-.HP
-\fB\-wallet=\fR<file>
-.IP
-Specify wallet file (within data directory) (default: wallet.dat)
-.HP
-\fB\-walletbroadcast\fR
-.IP
-Make the wallet broadcast transactions (default: 1)
-.HP
-\fB\-walletnotify=\fR<cmd>
-.IP
-Execute command when a wallet transaction changes (%s in cmd is replaced
-by TxID)
-.HP
-\fB\-whitelistaddress=\fR<Raddress>
-.IP
-Enable the wallet filter for notary nodes and add one Raddress to the
-whitelist of the wallet filter. If \fB\-whitelistaddress=\fR is used, then the
-wallet filter is automatically activated. Several Raddresses can be
-defined using several \fB\-whitelistaddress=\fR (similar to \fB\-addnode\fR). The
-wallet filter will filter the utxo to only ones coming from my own
-Raddress (derived from pubkey) and each Raddress defined using
-\fB\-whitelistaddress=\fR this option is mostly for Notary Nodes).
-.HP
-\fB\-zapwallettxes=\fR<mode>
-.IP
-Delete all wallet transactions and only recover those parts of the
-blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
-account owner and payment request information, 2 = drop tx meta data)
-.PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: 0, supplying <category> is
-optional). If <category> is not supplied or if <category> = 1, output
-all debugging information. <category> can be: addrman, alert, bench,
-coindb, db, estimatefee, http, libevent, lock, mempool, net,
-partitioncheck, pow, proxy, prune, rand, reindex, rpc, selectcoins, tor,
-zmq, zrpc, zrpcunsafe (implies zrpc).
-.HP
-\fB\-experimentalfeatures\fR
-.IP
-Enable use of experimental features
-.HP
-\fB\-help\-debug\fR
-.IP
-Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR)
-.HP
-\fB\-logips\fR
-.IP
-Include IP addresses in debug output (default: 0)
-.HP
-\fB\-logtimestamps\fR
-.IP
-Prepend debug output with timestamp (default: 1)
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in KMD/kB) smaller than this are considered zero fee for relaying
-(default: 0.000001)
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console instead of debug.log file
-.HP
-\fB\-shrinkdebugfile\fR
-.IP
-Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-testnet\fR
-.IP
-Use the test network
-.PP
-Node relay options:
-.HP
-\fB\-datacarrier\fR
-.IP
-Relay and mine data carrier transactions (default: 1)
-.HP
-\fB\-datacarriersize\fR
-.IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 8192)
-.PP
-Block creation options:
-.HP
-\fB\-blockminsize=\fR<n>
-.IP
-Set minimum block size in bytes (default: 0)
-.HP
-\fB\-blockmaxsize=\fR<n>
-.IP
-Set maximum block size in bytes (default: 2000000)
-.HP
-\fB\-blockprioritysize=\fR<n>
-.IP
-Set maximum size of high\-priority/low\-fee transactions in bytes
-(default: 1000000)
-.PP
-Mining options:
-.HP
-\fB\-mint\fR
-.IP
-Mint/stake coins automatically (default: 0)
-.HP
-\fB\-gen\fR
-.IP
-Mine/generate coins (default: 0)
-.HP
-\fB\-genproclimit=\fR<n>
-.IP
-Set the number of threads for coin mining if enabled (\fB\-1\fR = all cores,
-default: 0)
-.HP
-\fB\-equihashsolver=\fR<name>
-.IP
-Specify the Equihash solver to be used if enabled (default: "default")
-.HP
-\fB\-mineraddress=\fR<addr>
-.IP
-Send mined coins to a specific single address
-.HP
-\fB\-minetolocalwallet\fR
-.IP
-Require that mined blocks use a coinbase address in the local wallet
-(default: 1)
-.PP
-RPC server options:
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.HP
-\fB\-rest\fR
-.IP
-Accept public REST requests (default: 0)
-.HP
-\fB\-rpcbind=\fR<addr>
-.IP
-Bind to given address to listen for JSON\-RPC connections. Use
-[host]:port notation for IPv6. This option can be specified multiple
-times (default: bind to all interfaces)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 7771 or testnet:
-17771)
-.HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0)
-or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified
-multiple times
-.HP
-\fB\-rpcthreads=\fR<n>
-.IP
-Set the number of threads to service RPC calls (default: 4)
-.PP
-Metrics Options (only if \fB\-daemon\fR and \fB\-printtoconsole\fR are not set):
-.HP
-\fB\-showmetrics\fR
-.IP
-Show metrics on stdout (default: 1 if running in a console, 0 otherwise)
-.HP
-\fB\-metricsui\fR
-.IP
-Set to 1 for a persistent metrics screen, 0 for sequential metrics
-output (default: 1 if running in a console, 0 otherwise)
-.HP
-\fB\-metricsrefreshtime\fR
-.IP
-Number of seconds between metrics refreshes (default: 1 if running in a
-console, 600 otherwise)
-.PP
-Komodo Asset Chain options:
-.HP
-\fB\-ac_algo\fR
-.IP
-Choose PoW mining algorithm, default is Equihash
-.HP
-\fB\-ac_blocktime\fR
-.IP
-Block time in seconds, default is 60
-.HP
-\fB\-ac_cc\fR
-.IP
-Cryptoconditions, default 0
-.HP
-\fB\-ac_beam\fR
-.IP
-BEAM integration
-.HP
-\fB\-ac_coda\fR
-.IP
-CODA integration
-.HP
-\fB\-ac_cclib\fR
-.IP
-Cryptoconditions dynamicly loadable library
-.HP
-\fB\-ac_ccenable\fR
-.IP
-Cryptoconditions to enable
-.HP
-\fB\-ac_ccactivate\fR
-.IP
-Block height to enable Cryptoconditions
-.HP
-\fB\-ac_decay\fR
-.IP
-Percentage of block reward decrease at each halving
-.HP
-\fB\-ac_end\fR
-.IP
-Block height at which block rewards will end
-.HP
-\fB\-ac_eras\fR
-.IP
-Block reward eras
-.HP
-\fB\-ac_founders\fR
-.IP
-Number of blocks between founders reward payouts
-.HP
-\fB\-ac_halving\fR
-.IP
-Number of blocks between each block reward halving
-.HP
-\fB\-ac_name\fR
-.IP
-Name of asset chain
-.HP
-\fB\-ac_notarypay\fR
-.IP
-Pay notaries, default 0
-.HP
-\fB\-ac_perc\fR
-.IP
-Percentage of block rewards paid to the founder
-.HP
-\fB\-ac_private\fR
-.IP
-Shielded transactions only (except coinbase + notaries), default is 0
-.HP
-\fB\-ac_pubkey\fR
-.IP
-Public key for receiving payments on the network
-.HP
-\fB\-ac_public\fR
-.IP
-Transparent transactions only, default 0
-.HP
-\fB\-ac_reward\fR
-.IP
-Block reward in satoshis, default is 0
-.HP
-\fB\-ac_sapling\fR
-.IP
-Sapling activation block height
-.HP
-\fB\-ac_script\fR
-.IP
-P2SH/multisig address to receive founders rewards
-.HP
-\fB\-ac_staked\fR
-.IP
-Percentage of blocks that are Proof\-Of\-Stake, default 0
-.HP
-\fB\-ac_supply\fR
-.IP
-Starting supply, default is 0
-.HP
-\fB\-ac_timelockfrom\fR
-.IP
-Timelocked coinbase start height
-.HP
-\fB\-ac_timelockgte\fR
-.IP
-Timelocked coinbase minimum amount to be locked
-.HP
-\fB\-ac_timelockto\fR
-.IP
-Timelocked coinbase stop height
-.HP
-\fB\-ac_txpow\fR
-.IP
-Enforce transaction\-rate limit, default 0
-.SH COPYRIGHT
-
-In order to ensure you are adequately protecting your privacy when using Hush,
-please see <https://myhush.org/security/>.
-
-Copyright (C) 2009-2019 The Bitcoin Core Developers
-Copyright (C) 2015-2019 The Zcash Developers
-Copyright (C) 2015-2019 jl777 and SuperNET developers
-Copyright (C) 2018-2019 The Hush developers
-
-This is experimental software!!!
-
-Distributed under the MIT software license, see the accompanying file COPYING
-or <http://www.opensource.org/licenses/mit-license.php>.
-
-This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
-by Eric Young.