Loading chat history did more work than it needed to. Seeding the unread
watermark walked every conversation and copied each one's full message
list out of the store just to read the last timestamp, and the database
reload copied every message into the store one at a time with no
reservation.
- The watermark now comes from one pass over the stored messages that
returns the latest timestamp per conversation, with no per-
conversation copy or sort.
- The store gained a move-append and a reserve, so the reload pre-sizes
its vector and dedup set once and moves each row in instead of copying
it. The dedup key is computed before the move.
Behaviour is unchanged: the watermark values and the blocked-conversation
filter on reload are the same as before.
Tests cover the per-conversation latest-timestamp pass and move-append.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two secure-delete paths overwrote a sensitive file and then unlinked it,
but neither reliably forced the overwrite to stable storage. The
plaintext key export used a buffered stream with only a flush, and the
PIN vault removal opened a second descriptor to fsync only on non-
Windows. On a crash, or on Windows, the zeroing write could stay in the
OS cache and the original bytes could survive on disk.
Both now go through one shared best-effort secure-delete helper:
- It overwrites the file in place in chunks, never truncating first, so
the original blocks are the ones rewritten.
- It flushes the data to the device before unlinking (full fsync on
macOS, write-through on Windows), then removes the file.
- It is safe on a missing file and reports whether the file is gone.
This is still best-effort: SSD wear-levelling and copy-on-write or
journaling filesystems may retain copies.
Tests exercise the overwrite-and-remove helper.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A failed wallet unlock was always treated as a wrong guess: the lockout
counter was bumped and the back-off curve armed no matter why the RPC
failed. A busy or warming-up node, a transport timeout, or a wallet that
is not actually encrypted would all eat an attempt and could push a user
into a lockout without a single mistyped passphrase.
The failed call is now classified before it is acted on:
- Only the daemon's "passphrase incorrect" error counts as a wrong
guess and advances the lockout.
- A warming-up or unreachable node, a reply timeout, or a full queue is
reported as a transient busy-node condition with no attempt charged.
- A "wallet is not encrypted" reply refreshes the local encryption state
instead of penalising the user.
- Any unknown error surfaces its message without touching the counter.
The PIN path got the same treatment: when the vault decrypts correctly
but the unlock RPC then fails for a non-credential reason, the attempt
is no longer counted.
Tests cover the classification of each failure kind.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The hashrate sparkline guessed the age of its oldest sample from the
sample count, labelling the left edge "5m ago", "1m ago" or "start"
regardless of how fast samples actually arrived. Solo and pool samples
come in at different intervals, and a slow or stalled poll made those
labels wrong.
- Each hashrate sample now carries a wall-clock timestamp, kept in
lockstep with the value as the history fills and rolls over, for both
the solo and pool histories.
- The chart's left-edge label is derived from the oldest sample's actual
timestamp, falling back to "start" only when no stamp is available.
Tests: a mining refresh records a timestamp per sample, and the
timestamp history stays the same length as the value history once the
history is capped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When following the debug.log of a node this session did not launch, every
poll re-read the last 2 MB of the file and re-scanned it for the process
banner. If that node logs to its console instead, the banner is never
there, so the full re-scan repeated on every poll for the life of the
process.
- A miss is now remembered by pid and file size: if nothing has changed
since the last miss, or the file is growing but the backoff has not
elapsed, the scan is skipped.
- The retry schedule re-scans quickly during a fresh-node grace window
(the banner flushes a beat after the pid appears) and then backs off
from 4 s, doubling to a 60 s cap. The memo is cleared on a successful
tie and when the followed process goes away.
Tests: the retry delay is fast within the grace window and then steps
4, 8, 16 s up to the 60 s cap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
While no lite wallet is open the startup auto-open check called
walletExists() every frame. That call crosses into the backend and
touches the filesystem (and prints), so it ran a disk stat on every
frame the app idled at the first-run prompt.
- walletExists() now caches its result for about two seconds on the main
thread, and the cache is invalidated whenever an open or lifecycle
result is consumed, since the wallet file may have changed.
- The auto-open condition is reordered so the cheap timer checks gate the
call, and the click-time overwrite decision uses a new
walletExistsFresh() that bypasses the cache.
Tests: the cache returns the first queried value within the TTL and the
fresh read re-queries the backend and refreshes the cache.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The transaction export streamed rows straight into an ofstream. A write
that failed partway, on a full disk or removable media, left a truncated
CSV on disk behind a success toast. The CSV formatting also lived inline
in the dialog with no test coverage.
- The CSV is now built in memory and written atomically (temp file plus
rename), so a write failure is reported with an error toast and leaves
no partial file.
- Formatting moves into a reusable helper, and the timestamp conversions
use the thread-safe localtime variants and tolerate a conversion
failure rather than dereferencing a null result.
Tests: field escaping neutralises formula-injection prefixes and quotes
special characters, and the full CSV has the expected header and rows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The send tab read the OS clipboard every frame the paste button was
hovered, to preview a pasted address. SDL's clipboard read is a
synchronous round-trip that can stall, and the preview can only ever
latch when the recipient field is empty, so most of those reads were
wasted work.
- The clipboard is now read only while the button is hovered and the
recipient field is empty, polled once on hover entry and then at most
twice a second.
- Trimming the clipboard text moves to a shared helper that also bounds
the copy so a pathological multi-megabyte clipboard is ignored.
Tests: the trim helper handles null, surrounding whitespace, an
all-whitespace string, and the length bound.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The chart fetch and the Market tab both resolved the saved exchange and
pair names into the registry, with their own near-identical scans and
slightly different fallbacks. Keeping two copies risked the chart and
the chips disagreeing about which pair was selected.
- A single resolver maps the saved names to a registry index, matching
the exchange name (any exchange when none is saved) then the pair
display name, and falling back to the registry's first pair, the UI
default. The chart fetch and the Market tab both call it.
- The Market tab now derives its selection indices from the saved names
against the current registry every frame, so the indices stay correct
when the live exchange list replaces the fallback; a steady-state fast
path skips the scan once the indices already name the saved selection.
Tests: the resolver returns the right index for a matched exchange/pair,
an empty-exchange match, and the first-pair fallback on misses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The contacts list carried its own lowercase-and-compare sort, its own
lowercase substring search, and an inline linear middle-truncation loop
for fitting an address to a column width. These duplicated logic that
belongs in the shared text helpers.
- A new allocation-free case-insensitive compare replaces the per-sort
lowercasing; it lowercases ASCII per byte and leaves bytes >= 0x80
alone, so UTF-8 labels sort exactly as before.
- Search now uses the shared case-insensitive contains helper.
- Middle-truncation to a pixel width moves to a shared template that
binary-searches the fit (about log2(n) width measurements instead of
up to n) while producing the same result as the old linear shrink.
Tests: the compare matches lowercase-then-compare across ASCII, UTF-8
bytes and length ties, and the fit helper matches the old linear loop
across lengths and widths.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The status-bar notifications only expired the front of the queue, so an
expired newer toast could sit in front of a still-live older one and
hide it from view. The liveness check that drives continuous repaints
also disagreed with what render() actually showed.
- Expired toasts are now pruned wherever they sit in the queue, not just
at the front, so the newest remaining toast is always a live one.
- The visible toast is the newest live entry, skipping an expired newer
one. The liveness check reports active while a toast is visible plus
one trailing frame, so the final faded-out state is painted once and
then repaints stop; it self-expires if render() is skipped.
Tests: pruning removes expired entries from anywhere in the queue, the
visible toast skips an expired newest entry, and liveness tracks it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The filled sparklines and the market price chart built their area fill
with PathFillConcave, which runs a per-scanline pass over the whole
filled region. For a simple area under an x-monotone curve that work is
unnecessary.
- A new helper fills the area between an x-monotone polyline and a
horizontal baseline directly as a triangle strip, in one pass over the
points. The market sparklines, the market price chart and the mining
hashrate sparkline all use it. The fill is flat and non-anti-aliased;
the anti-aliased curve drawn on top hides the stepped top edge, and
the faint side and bottom edges are imperceptible at these alphas.
Tests: the strip's vertex and index counts, index bounds, and that its
triangle area matches the trapezoid area under the polyline.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The acrylic effect blits its backdrop from the default framebuffer using
the logical viewport size as the source rectangle. On a HiDPI display
the framebuffer is larger than the logical size, so the blur sampled
only the lower-left corner of the screen and the glass showed the wrong
region stretched across each panel.
- The capture blit source now uses the real framebuffer pixel size
(logical size times ImGui's DisplayFramebufferScale, truncated the
same way the GL backend does), while the capture and blur targets stay
at logical size. The framebuffer size is tracked separately from the
viewport size so quality or buffer-lifetime resets cannot lose it, and
moving the window between a Retina and a non-Retina display redoes the
capture. DX11 is unaffected; its scale is one.
- The debug screenshot sweep captures at framebuffer size too, so HiDPI
captures are no longer cropped.
Tests: the framebuffer-extent helper matches the GL backend's
truncation and falls back to the logical size when the scale is unknown.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Glass cards scrolled out of view still ran their full effect path, and
the rainbow border always used a segment count derived from a fixed
per-pixel budget, so wide cards drew far more line segments than their
slowly changing gradient needed.
- A glass panel whose rectangle lies wholly outside the draw list's clip
rect now returns early, so a scrolled-out card draws nothing (its
border and ember passes are skipped along with the fill).
- The rainbow border is split into segments by perimeter arc length:
straight edges get one segment per ~32 dp, corner arcs get a few
chords each to stay round, and a fully transparent border is skipped
outright. A wide card now draws tens of segments instead of a couple
hundred, with no visible change.
Tests: the segment fractions are ascending and bounded, each corner arc
keeps at least three chords, and the rect-cull margin test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The theme effects stored their animation time in a 32-bit float taken
from the ImGui clock. After a few days of uptime a float can no longer
resolve a single frame step, so every oscillation, drift and sweep began
to stutter, snapping forward a frame at a time instead of moving
smoothly.
- The clock is now held as a double, and the phase/oscillator maths runs
through a small set of shared helpers that reduce the argument in
double before returning a float. A float clock at 30 days steps by a
quarter second per ULP; the double clock stays frame-accurate.
- Hue cycling, the rainbow and gradient borders, shimmer, specular
glare, glow pulse, edge trace, embers, the sandstorm and the viewport
wash all use the shared helpers, so their timing no longer drifts with
uptime.
Tests: the helpers advance smoothly after seven days, pin the legacy
float breakdown at 30 days, and stay in range for negative offsets.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The explorer block cache searched with a LIKE query that had to escape
wildcards, grew without any limit, and retried a failed open on every
frame, including a two-second busy wait on the UI thread.
- Search now uses an instr() substring test on a lowercased needle, and
only checks the height text when the query is all digits, since a
non-numeric needle can never appear inside a decimal height.
- The table is pruned to the highest 20000 blocks, once per open and
periodically as blocks are stored, so the file stops growing at its
high-water mark.
- A failed open is negative-cached (30 s by default) instead of retried
every frame, and the busy timeout drops to 250 ms.
- When the cache database is unavailable or refuses a write, the block
spills to a small bounded in-memory map that both the list and search
read, so a spilled block never appears in one but not the other; the
spill is cleared when the chain tip regresses.
- A batch of blocks is written under one savepoint instead of one commit
per block.
Tests: case-insensitive hash and height search, the negative-cache and
spill paths with tip-regression eviction, and batch store plus prune.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The inline detail panel was tracked by the filtered list index. The
display list is rebuilt and re-sorted on every data change, sort switch
or filter edit, so a stored index pointed at a different transaction
after the rebuild, and a page reset was triggered by any change in the
row count, bouncing the view back to page 1.
- The open row is now tracked by a stable content key (txid, display
type, address and the amount's exact bits) so the right row stays open
across rebuilds.
- The page resets and the open row collapses only when a filter input
changes (type, sort or the full search text). A new or removed row is
data and now just clamps the current page.
- The open row is also cleared on page navigation and when the list
empties, so a wallet switch does not resurrect an old expansion.
Adds pure helpers rowKey/filterInputsChanged to
transactions_tab_helpers.h.
Tests: rowKey distinguishes each field and separates +0.0 from -0.0, and
filterInputsChanged latches each input change but not the first frame.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The History tab built a txid-to-indices map twice when its inputs
changed, once for the summary-card totals and once for the display list,
each a full pass over every transaction with string-keyed hashing.
- The rows are now grouped by txid a single time whenever the
transaction list changes, into an index-only structure (first/next
chains with no string copies), and both the summary pass and the
display pass reuse it. A sort-combo change re-sorts without regrouping.
Adds a pure, unit-testable groupByTxid helper in
transactions_tab_helpers.h.
Tests: the chains match a reference map over a random id stream, and the
empty and single-row cases.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A large RPC result was fully split into lines and copied before being
handed to the console, even though only the last few lines could survive
the model's line cap.
- The formatter now takes a line cap and keeps only the last N lines,
located by a backward newline scan, so a huge result is never fully
split or copied. JSON classification still keys off the first
character of the whole result.
- It works over a string view and moves line text through, and fold
spans are computed over the formatted lines directly instead of a
separate vector of copies.
- getline semantics are preserved: a trailing newline adds no empty
line and an empty result yields no lines.
Tests: getline parity for empty, trailing-newline and blank-line inputs,
the backward tail cap, and JSON classification and fold spans over a
capped result.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console's pending, not-yet-drained queue was unbounded, so a hidden
Console page that kept receiving verbose daemon-log chunks could grow
without limit.
- Pending lines are now bounded by both a line count and a byte budget.
The oldest pending lines are dropped once either is exceeded, while
the newest line is always kept so one huge line is never lost.
- A formatted RPC result is ingested as one block under a single lock,
so lines from other producers can never interleave inside it.
The front-sequence accounting is also corrected: a pending line dropped
by the cap never entered the visible buffer, so it no longer advances
the front sequence. Only a front eviction or a clear does.
Tests: the line and byte caps keep the newest lines, a single oversized
line survives, a batch appends contiguously, and the front sequence
advances only on a front eviction or clear.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Market-tab portfolio groups were tied to a wallet by a hash of its
address set. That hash changed whenever an address was added, so a
group built for a wallet could silently drop out of view once the
wallet gained a new address.
- Groups are now scoped by the wallet's stable id, which is persisted
and never derived from the address set, so adding an address can no
longer orphan a group.
- An older build's address-hash scope fails open (the group stays
visible) and is migrated once per wallet per session to the stable id.
A legacy group is claimed when its old hash matches, when one of its
own addresses belongs to this wallet, or when only one wallet is
known; anything ambiguous is left legacy and stays visible.
- Scope filtering waits until the wallet's addresses are loaded, so a
group never flashes an empty 0.0000 balance and Add stays disabled
until the wallet is resolved. This works on Lite, which never stamps
an address-update time.
Behaviour: an older build opened after this change hides groups tagged
with a stable "w:" scope (they are not deleted and return on the next
upgrade) - worth a release note.
Tests: group visibility across global, stable and legacy scopes with the
wallet resolved and not; the migration rules (hash match, address
overlap, single-wallet claim, ambiguous left alone, idempotent); and a
save/load round trip where an address-set change cannot orphan the scope.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A Settings bootstrap was only wrapped up inside the dialog's own draw
path. If the dialog finished downloading, verifying or extracting while
the user had clicked away or minimized the window, completion was never
processed: the connect and reconcile gate stayed held and the
post-bootstrap rescan was never armed.
- Completion is now a pure decision driven from a pump() that both the
per-frame update and the dialog's render call, so a finished bootstrap
is handled every tick whether or not the dialog is drawn.
- With the dialog open the behaviour is unchanged: it advances to the
Done or Failed screen and those screens still own the gate. With the
dialog closed, pump() releases the gate itself and shows a success or
failure toast; a user-cancelled run is released silently.
User-visible: a bootstrap started from Settings now completes, arms its
rescan and reports its result even if the dialog is closed or the window
is minimized when it finishes.
Tests: the completion decision for an unfinished worker, a completed run
with the dialog open and closed, a failed run, and a user-cancelled run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Send tab auto-selected the highest-balance address on first load.
When another tab had already pre-filled the source with "Send from this
address", that first-load pick overwrote the user's choice, and the
dropdown's selected index could drift out of step with the address that
would actually be debited when the address list changed.
- The send-from string is now the single source of truth. The one-shot
auto-pick only fills an empty source and never replaces one the user
or another tab set, and the list index is re-derived from the string
each frame so it cannot desync.
- An explicit "Send from this address" choice latches the auto-pick off,
so the first visit cannot undo it.
- A chosen source the dropdown does not list (zero balance, view-only,
or the list still loading) now previews the address that will be
debited instead of the "Select a source" placeholder.
User-visible: a send-from address chosen from another tab survives the
first load and later refresh ticks.
Tests: the source resolver keeps a pre-fill on first visit, fills an
empty source with the best spendable address, keeps a source missing
from a short list with index -1, latches nothing while disconnected or
with an empty list, and re-derives a stale index from the string.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Validate address dialog chose its RPC from the first character of
the input, then asked the transparent-only validateaddress for every
case. That RPC is Base58-only, so a valid Sapling (z) address came back
isvalid=false and was reported invalid.
- The input is now classified with the checksum-verified recognizers,
and a shielded address is sent to z_validateaddress while a
transparent (mining) address keeps validateaddress.
- Anything that is not an address - a typo, garbage, or a pasted
viewing/spending key - is judged invalid on the spot and never sent to
the node, so a key pasted into the field is not leaked to an RPC.
- On Lite there is no node to ask, so the dialog shows the checksum
verdict alone and hides the "owned by this wallet" row.
Tests: validateRpcMethod maps shielded to z_validateaddress, transparent
to validateaddress, and a key or empty string to no RPC.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The installed-daemon lookup built the binary path from the Windows
resource key "dragonxd.exe", which never exists on Linux or macOS, so
the installed full node was never found there. The version scan also
read the whole binary, now around 200 MB, into memory on the UI thread.
- A new DAEMON_BINARY_NAME gives the daemon's file name on this platform
("dragonxd" on POSIX, "dragonxd.exe" on Windows); the old resource
constant stays only as the embedded-table key. The installed daemon is
now found on POSIX.
- The version-stamp scan streams the file in 4 MiB chunks with bounded
memory, carrying bytes across each boundary so a stamp straddling it is
neither cut short nor missed, and stops at the first match. The result
is cached by path, size and mtime, so only a changed binary is
rescanned.
- Settings stats the binary on the UI thread but runs the streamed scan
on a worker, guarded so a new scan is not started while one is still
running (the future blocks in its destructor), and the version fills
in when it lands.
Tests: the POSIX path and binary name, a version stamp in a small file,
a stamp straddling the 4 MiB chunk boundary, and a file with no stamp.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Mining tab shows earnings derived from transaction history, but it
was not treated as a wallet-data page, so newly mined or paid-out
earnings did not appear until the user left the tab and came back. A
coinbase row also changes category in place (immature becomes generate
at maturity, or orphan on a reorg), and the Recent merge kept both the
old and the new row, double-counting the earnings.
- The Mining tab now gets the cheap between-blocks Recent poll: one
listtransactions per new block, bounded by the 15 s transaction-age
timer, once history has loaded. It never runs a full routine scan and
never pre-empts an owed dirty cycle; tracked sends still take their
normal cycle on any page.
- The shielded-payout probe runs only while the pool miner is running,
since pool payouts are shielded receives while a solo miner's earnings
are transparent coinbase rows.
- The Recent merge drops the previous row of the other coinbase category
when a coinbase transitions, so maturing or reorged rewards are no
longer counted twice. A non-coinbase row sharing the txid is left
alone.
Behaviour change: mining earnings update on the Mining tab per block
instead of only on tab re-entry, and maturing or reorged coinbase rows
no longer double-count.
Tests: the per-block poll gate (one poll per block, due only after
history loads, held while dirty or addresses are dirty), the Mining-page
cycle shaping, and the coinbase transition merge for immature to
generate, generate to orphan, and a shared-txid non-coinbase row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Setting a PIN always unlocked the wallet with a 5 s probe and then
re-locked it, even when the wallet was already unlocked, so a PIN check
silently re-locked an unlocked wallet. And once the daemon's absolute
unlock window ran out the GUI still showed "unlocked", so the next send
failed with nothing on screen explaining it.
- The Set-PIN check now decides on the main thread: an unlocked wallet
is verified with the time it has left (capped at seven days) and is
not re-locked, so the GUI and the daemon keep agreeing; a locked
wallet still uses the 5 s probe and re-locks. Either way the daemon's
lock state is re-read afterwards, which self-heals any drift.
- When the daemon's unlock window has expired but the GUI still says
"unlocked", a bounded reconcile (once per expiry, 30 s back-off)
re-reads getwalletinfo so the lock screen and the transaction-cache
lock follow the daemon. Lite wallets, which have no daemon timer, are
left alone.
Behaviour change: with auto-lock disabled the daemon still re-locks at
its window, and the GUI now lands on the lock screen instead of
appearing unlocked until a send fails.
Tests: the Set-PIN verify plan (unlocked keeps its remaining time and
skips the re-lock, locked or near-expiry falls back to the 5 s probe and
re-lock, long windows are capped) and the unlock-expiry predicate across
encrypted, locked, no-deadline and not-yet-expired cases.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The wizard persists an "encryption requested" flag so a quit or crash
before the wallet is actually encrypted is not silent. That flag was
only reconciled on the slow-path getwalletinfo refresh, so it could be
left stale, and the clear-and-warn logic lived inline in two places.
- A single reconcileEncryptionPending now runs on every connect and on
every encryption-state refresh, keyed on the parsed getwalletinfo
reply. It clears the flag whenever the wallet is encrypted, however it
got there (deferred request, Settings, another client), and warns once
per session when encryption was requested but the wallet is not
encrypted and nothing is pending or in flight.
- A failed or warm-up (-28) RPC decides nothing, so a 15 s timeout that
forces encrypted=false can no longer mis-clear or mis-warn.
- The flag is also cleared at encryptwallet success and when the user
removes encryption, so neither path leaves a stale flag that would
warn on the next connect. No settings format change.
Tests: the pure decision helper over the flag, RPC-ok, encrypted,
deferred-pending, in-flight and already-warned combinations (clear when
encrypted, warn once when lost, nothing on a failed RPC or no flag).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The auto-lock idle clock was reset whenever any ImGui item was active,
so a text field left focused (a half-filled send form, say) counted as
continuous activity and kept the wallet unlocked indefinitely, well past
the configured idle timeout.
- The idle clock is now fed by real input events (key, text, mouse,
touch, pen, gamepad button) as they are ingested on the main thread,
plus a still-held mouse button so a drag or scrollbar grab that emits
no new event still counts. A focused but untouched widget no longer
does.
- A new header-only IdleTracker owns the clock and never moves backwards,
so an event stamped before the previous one cannot shorten the idle
time.
Behaviour change: a form left focused and idle past the timeout now
auto-locks. The form's buffers are app state and survive the lock and
unlock, so nothing typed is lost.
Tests: a new IdleTracker case covers idle time growing with no events
(enough to trip a 900s lock), activity resetting it, the clock never
moving backwards, and a query before the last activity reading zero
rather than a negative value.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A failed backend sync was silently swallowed: the reply was never
inspected, so a sync that errored out left the wallet showing a
"syncing" state that never completed and never reported a problem.
- The sync and rescan replies are now parsed. On failure the partial
progress is saved and the sync is retried with exponential back-off
(5s doubling up to 60s, six attempts in all), then an explicit failed
state is published: done, sync not complete, and the backend's error
text carried through.
- A failed rescan is retried as a plain sync, because a rescan has
already cleared the wallet and re-running it would throw away the
partial progress just saved.
- A terminal error, such as a reorg deeper than the wallet can unwind,
stops the retries immediately instead of waiting out the attempts.
- Recovery is observed, not guessed: once a later refresh's server-bound
reads all succeed, the failed state clears itself.
Behaviour change: a sync failure now surfaces to the user as a failed
state with a message, instead of a frozen "syncing", and the client
retries on its own with back-off.
Tests: a parser case for the success, failure, and terminal replies, and
fake-backend controller cases for retrying after a failure, giving up
after the attempt cap, a terminal reorg stopping at once, a failed
rescan retrying as sync, cancel stopping the back-off, and the failed
state self-healing on a good refresh.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The lite backend lists transactions oldest-first, but every consumer of
the transaction list assumes newest-first and takes a prefix of it, so
the Recent Transactions / Recent Sends / Recent Received panels and the
CSV export showed the oldest records instead of the latest.
- The UI copy is now sorted pending (0-conf) first, then newest-first by
timestamp, the same order as the History tab's default.
- The sort is stable, so several records that share a txid (a send entry
plus its per-note entries, or same-block transactions) keep a
deterministic order across refreshes. That keeps the order-sensitive
change check reporting "unchanged" and avoids bumping the transaction
revision every couple of seconds.
Tests: a new case covers the pending-first, newest-first ordering, a
stable order within one txid, and the revision staying unchanged when
the identical model is re-applied.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The bootstrap preflight's protected names could be bypassed by names
that resolve onto them, and its cancel and quit paths had two timing
gaps.
- Entry names are judged as the file system resolves them: '\' is a
separator, "." components are dropped and each component loses its
trailing dots and spaces, as Win32 does ("./wallet.dat" and
"DRAGONX.conf." name protected files). The whole archive is refused
for an absolute or drive-rooted name, a ".." component, any ':'
(drive letter or NTFS alternate data stream, "DRAGONX.conf::$DATA"),
an 8.3 short name ("DRAGON~1.CON"), a component of only dots or
spaces (other than "."), and any byte >= 0x80 or ASCII control
character: macOS folds or ignores some Unicode (U+017F, U+212A,
U+200C) onto a protected name, and the published bootstrap archive
uses plain ASCII names. A refused name is echoed
with \xNN escapes. A member is written at the path it was checked
under, and the protected-name check runs on the resolved name.
- The user's Cancel (Settings dialog and first-run wizard) goes through
requestCancel(). It is refused once the old chain data starts being
replaced, and the start of that window re-checks a cancel under the
same lock, so a click lands before the old chain is touched or not at
all.
- Quit cancels the wizard's and the Settings bootstrap when the
shutdown starts; the HEAD and checksum requests now end at once on
cancel, and a cancelled HEAD keeps the partial download. A run
cancelled before the window leaves the old chain as it was. A run
inside it stops extracting and removes its partial chain while the
shutdown screen shows "Cleaning up...", so it ends with no chain data
(wallet.dat untouched; Retry reuses the zip, or the node resyncs).
That wait is bounded: at most 2 minutes from the start of the
shutdown, then 3 s in shutdown(), after which a worker still running
is left to the process exit. Only a cleanup that overruns that cap
can leave a partial chain, which dragonxd then answers with its
reindex offer.
Tests: refusal of the Windows-resolved, non-ASCII and control-character
names with the escaped echo; the protected-name list incl. the resolved
forms and a planted -wallet file, conf and database/ that stay
byte-identical; the user-cancel window; the bounded quit wait and
safeToAbandon(); a cancel ends a HEAD request that never answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The "Use Tor" checkbox was saved but never read: no build routed any
traffic (node, RPC, price/update/bootstrap/pool HTTP or Lite gRPC)
through Tor, so users who ticked it believed they were anonymous.
- The checkbox is disabled and always shown unticked, on the Settings
page and in the legacy Settings window. Its tooltip says it is not
available and gives the alternatives: for the node, proxy=127.0.0.1:9050
in DRAGONX.conf with Tor running; otherwise a system-wide VPN/Tor (Lite
builds get the short version). The "Use Tor" label is kept.
- Behaviour change: a stored use_tor=true is cleared once at startup
(Settings::consumeLegacyUseTor + a synchronous save before the async
writer and any Settings page state), with a 20 s warning in the user's
language. The cleared key is the "already told" flag, so the notice
never repeats. No settings format change.
- 3 new strings (tt_tor_unavailable, tt_tor_unavailable_lite,
tor_never_applied_notice) in all 8 languages; the tooltip wraps at
tor-tooltip-wrap-width from ui.toml.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds that embed xmrig (Windows release) re-extracted the bundled miner
whenever its size differed from the file on disk. An "Update miner..."
install always differs, so the next start silently put the bundled build
back while settings still showed the updated version.
- The bundled miner is now placed only when it is missing, like the node
binaries (kXmrigRefreshOnSizeMismatch = false in the provision table).
Params and asmap still follow the bundled size.
- Behaviour change: a wallet upgrade no longer refreshes a miner the user
never updated; "Update miner..." is the way to get a newer build.
- The uncalled needsXmrigExtraction() is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A rescan or key import holds the node's cs_main for the whole wallet
scan. On the shared clients it hit the 30 s curl timeout, reported a
failure that wasn't one, abandoned a daemon RPC slot and flipped the app
into "node busy".
- One long wallet RPC at a time (rescan, importprivkey, importaddress,
importwallet, z_importkey, z_importviewingkey, z_importwallet) runs on
its own ungated client with no client timeout (rpc/long_call_lane.h).
It can be aborted from any thread, and an abort is never lost, even
one that lands before the client opens.
- The GUI rescan, key import and sweep use it. The sweep's fund-moving
body is unchanged; only the client it calls differs. runtimeRescan()
returns bool, and a refused post-bootstrap reconcile stays armed.
- The console routes rescan and the import commands through the lane;
its input stays usable meanwhile, and a refusal is printed like any
other result. RPCClient gains callRaw(.., timeoutSec).
- Restart, wallet switch, delete-chain, bootstrap (now also from
Settings) and the other node-stopping flows are refused while it runs,
with a message saying a key import or rescan is still running; quit
asks for confirmation. The lane is aborted at quit.
- A second import or rescan is refused before the key is copied anywhere.
An import cut off after the request reached the node (a lost reply,
or a proxy's 502/504 while the node still imports) says the key may
already be in the wallet and to run Settings -> Rescan. Only the
node's own HTTP-layer refusals (401, 503, work queue full, unhandled
request) say that the key was not imported. A pure
classifyLongCallCutOff() makes that choice.
- New strings in all 8 languages; console results stay English.
Tests: the long-method list and the console's routing; one lane at a
time; an abort lands whether it comes before the client opens or during
the call; a call with no client timeout outlasts a 3 s scan, where a 1 s
gated client times out and marks the node busy; classifyLongCallCutOff()
for every failure kind with and without a sent request, and from raw
HTTP replies (502, 504, a plain 500 -> cut off; 401, 503, queue full,
unhandled -> refused).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bootstrap removed blocks/, chainstate/ and notarizations/ first and
only then opened the archive. An unsafe entry, a full disk or a corrupt
member therefore left no chain, or a half-written one for dragonxd to
start on.
- Preflight before anything is deleted: every archive entry must be
safe (no absolute path, no "..") and readable, and the disk must hold
the extracted size plus max(256 MiB, 5%), counting what removing the
old chain frees (a symlinked chain dir counts 0). Free space counts as
unknown only when the probe errors, the capacity is 0 or the
available size is -1; a known disk with 0 bytes free is a refusal.
The old chain is kept on every preflight failure.
- Protected members are skipped, compared case-insensitively: any path
component starting with "wallet", any "database" component, a .cookie
or *.conf file, and top-level *.dat files other than fee_estimates,
peers and banlist. The number of non-critical member failures is
logged.
- The removal of the old chain is verified (a locked file fails the run
instead of mixing old and new chain files). If the extraction fails or
is aborted, the partial chain is removed again before the failure is
published; isDone() turns true only after the worker's last
filesystem change.
- Cancel is disabled while the old chain data is being replaced, and
quit aborts a running bootstrap.
- A complete zip from an earlier attempt is reused on Retry; its
checksum is re-verified. A download that cannot fit fails early, and a
disk-full write error says so.
Tests: the space rule (boundaries, unknown vs. full disk, saturation);
planArchive sizes, zip-slip, garbage and truncated zips; the
protected-name list; reclaimableBytes with symlinks; each preflight
refusal keeps the old chain and wallet.dat byte-identical; a corrupt
critical member removes the partial chain before the failure is
published.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After an unexpected exit the monitor thread returned on its own but
stayed joinable, and start() only spawned a monitor when none was
joinable. A node restarted after a crash (no stop() in between) then ran
unwatched: a second crash was never detected, its output was never
drained, and the dead run's stdout pipe leaked into the next fork.
- start() joins a monitor that returned on its own (only when joinable,
at the top, after the "already running" early returns), closes the
dead run's stdout pipe (Windows: process and pipe handles), and always
starts a new monitor for the process it launched. crash_count_ is kept.
- New lifecycle_mutex_ serializes start(), beginStop(), stop()'s flag
writes and joins, and endStop(), so two threads can never join the same
monitor. The monitor thread and the state callback never take it; a
beginStop() racing a start() waits for it to return (its longest wait
is the ~300 ms datadir-lock poll).
- start() is refused (returns false, state unchanged) while a stop is in
progress, i.e. between beginStop() and endStop().
- The daemon tests now start the stand-in only in isolation (temp
-datadir override, port check skipped): they no longer write the real
~/.hush/DRAGONX/obsidiandragon-dragonxd.pid or tail the real debug.log.
New tests: restart after a crash is supervised, a restarted run stops
cleanly, no fd leak over crash+restart cycles (Linux), and start() is
refused while stopping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A passphrase change left the PIN vault sealing the old passphrase. The
next PIN unlock opened the vault, walletpassphrase answered RPC -14, and
the generic catch ran the lockout curve on a correct PIN, while Settings
kept showing the PIN as active.
- Passphrase change: when the active wallet's vault exists at completion
(same vault path as at dispatch, passphrase actually changed), the
vault is marked out of date for the session and kept on disk: PIN entry
is no longer offered, a warning toast says so, and Settings shows
"PIN out of date" with a tooltip on how to fix it. The Change
Passphrase dialog notes beforehand that a PIN will go out of date.
- PIN unlock: RPC -14 after the vault opened is treated as "PIN out of
date": passphrase entry, a message, no attempt counted, no lockout, and
the vault is not deleted (-14 is only the daemon's answer; the vault may
hold the only copy of a passphrase that opens an older backup). After a
restart Settings shows the PIN as active until the first PIN attempt.
- A malformed vault (zero-filled by a removeVault() whose unlink failed,
truncated, unknown version) is treated as missing: passphrase entry,
"PIN file unreadable", no penalty. New SecureVault::isWellFormed().
- Race guards: Set/Change/Remove PIN are disabled while a passphrase
change runs, and Change Passphrase while a PIN operation runs.
- Setting or removing the PIN, or switching wallets, clears the mark;
setting a PIN offers PIN entry again. Change PIN keeps the mark (the
vault still seals the same passphrase).
- Pure decisions in data/pin_vault_policy.h, unit-tested. New strings in
all 8 languages.
No vault, wallet or settings format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The full UI sweep (dev builds only) ran its demo surfaces against the
real profile. Its teardown deleted wallet-{cold,trading,mining,donations,
2023,payroll}.dat from the real datadir, it created zero-filled wallet
files and picker-demo/extra-wallets folders, its demo wallet-index upsert
re-minted the active wallet's scopeId (hiding "w:"-scoped contacts), the
Contacts tab could re-attach legacy-scoped contacts to such a throwaway
id in addressbook.json, and it persisted the demo active wallet file and
Mining pool worker.
- Preflight: a full sweep is refused (toast + log line) while a real
workflow is in flight: a pending seed_migration_* setting or open
migrate dialog, a wallet switch, an encryption/import workflow, an
encrypt/PIN/lock operation, the seed-backup dialog, or a bootstrap.
The DRAGONX_FULL_SWEEP hook then exits as for an empty catalog.
- Persistence latches: AddressBook (snapshot on the first sweepBegin,
save/load latched while a demo-contacts surface is shown), WalletIndex
and Settings (active wallet file, contacts view mode, pool URL/worker)
for the whole sweep. Settings::sweepEnd() is the last statement of
clearDemoWalletData and flushes once only if a save was suppressed; a
quit mid-sweep writes nothing to the profile (the 0700 sandbox, with
zero-filled demo files only, may stay in the temp dir).
- Scope ids: during a full sweep activeWalletScopeId() returns the
persisted id or "" and never mints one, so the Contacts tab cannot
move legacy-scoped contacts to a throwaway id. The only address-book
write a sweep can still cause is the one-time legacy re-attach to the
wallet's persisted id, which opening Contacts does anyway.
- Sandbox: demo wallet files and folders go to a fresh random 0700 dir
under the temp dir (exclusive create, a pre-existing path or symlink
is refused), removed at sweep end. The teardown that deleted those six
wallet files is gone.
- Cleanup: the migrate-to-seed state, wizard phase, demo chat
conversations and a fabricated demo chat identity are reset at sweep
end; the seed-backup surface always shows the demo phrase and a real
z_exportmnemonic result is dropped while the sweep runs.
- i18n: one new key (screenshot_sweep_refused) in i18n.cpp and the 8
language files.
Tests: the address book snapshots only on the first sweepBegin, keeps
addressbook.json byte-identical while latched and restores the real
book; the wallet index keeps wallets.json and the real scope id, also
with the background writer attached; Settings restores the latched
values and flushes once only when a save was suppressed; the sandbox
helper refuses a pre-existing path or symlink and removes only a
prefixed dir, never a symlink's target.
Release note: v2.0.x UI sweeps could delete wallet-{cold,trading,mining,
donations,2023,payroll}.dat from the data directory and re-scope
contacts; this cannot be undone automatically.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Lite "Encrypt wallet" field and the Create/Restore passphrase had no
confirmation and no minimum length; only an empty passphrase was
refused. Encrypting locks the wallet at once, and a locked wallet cannot
reveal its seed, so a typo there could cost a user without a seed backup
their funds. The full-node encrypt dialog already requires 8 characters
and a confirmation.
This applies to new passphrases only. Opening and unlocking are
unchanged: an existing wallet with a shorter passphrase still opens and
unlocks.
- A pure liteEncryptPassphraseValid(pass, confirm): at least 8 bytes and
equal to the confirmation. It takes string_views, so the page's secret
buffers are never copied.
- liteLifecyclePassphraseAcceptable(op, pass, confirm) gates the Settings
create/open/restore request. Open is never checked, because its
passphrase field also unlocks an existing wallet. Create and Restore
are checked only when a passphrase was entered; an empty one still
creates an unencrypted wallet.
- Encrypt gets a Confirm field. The button stays disabled until the
passphrase is valid, and a hint says why (too short, with the count,
or not matching).
- Create/Restore show a Confirm row once a passphrase is typed, with the
same hint. Validate stays disabled while the passphrase is invalid, so
a click never wipes a typed seed over a passphrase typo. The request
builder re-checks the rule.
- The confirmation buffers are wiped with their passphrase: after a run
or an encrypt, and when the Confirm row is hidden.
- Once the wallet is closed, the Settings page wipes the Encrypt,
Confirm and Decrypt passphrase buffers whole every time, also when no
secret was revealed; before, closing the wallet wiped them only while
clearing a revealed backup or secret. They are zeroed in full because
an emptied field can still hold the old tail past its first NUL.
- New copy under Encrypt: "Anyone with the wallet file can try
passphrases offline. Back up your seed phrase first and use a long
passphrase."
- i18n: three new keys (lite_confirm_label, tt_lite_confirm_pass,
lite_encrypt_offline_warning) in i18n.cpp and the 8 language files,
added additively. The hints reuse the wizard's wiz_pass_too_short and
wiz_pass_mismatch. No new CJK glyphs, so the subset font is unchanged.
Tests: the validator rejects empty, short (7) and mismatched or
unconfirmed passphrases, and accepts 8 or more with a match. The request
gate always accepts Open, even "abc" with no confirmation, accepts
Create/Restore without a passphrase, and applies the rule to them
otherwise. An encrypted, locked wallet still opens and unlocks through
the controller with the 3-character passphrase "abc".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
importKeyCore guessed the key type from its first character, then
retried a failed import with the other command. That retry is what sent
shielded keys to the backend's transparent-key decoder, which panicked
on them and poisoned the wallet lock. A WIF typo that was still
valid base58 also reached the backend unchecked.
- The key is classified first, and exactly one backend command runs, or
none:
- secret-extended-key-... and zxview... go to "import";
- a Base58Check WIF with version 0xBC or 0x80 and the compressed flag
goes to "timport";
- everything else is refused before any backend call.
There is never a retry with the other command. A testnet (0xEF) WIF
is not accepted, because the Lite app is mainnet-only.
- New fixed, untranslated reasons: "uncompressed transparent keys are
not supported by the Lite wallet", a full-node incoming viewing key
(zivks) is explained as such, and anything else is "unrecognized key
format". The key is never echoed.
- The backend's refusal while the wallet is encrypted now maps to "wallet
is encrypted - remove encryption to import a private key". It is
checked before "locked", because unlocking would not help.
- base58Decode reserves its buffers up front, and it and
decodeBase58Check wipe their copies of the decoded bytes with
sodium_memzero on every return path, since the input can be a private
key.
- exportSeed rejects the all-zero-entropy phrase (23 x "abandon" + "art").
A backend built before the seed-export fix returns it for a wallet
whose lock failed halfway (seed wiped, wallet still unlocked); it is
never a real backup and must not seed a chat identity.
- An open that the backend recovered from the .bak ("OK: recovered from
backup; damaged file kept as <name>") is written to the lite log.
Tests: the retry control now expects one "import" and no "timport", and
"typo-key" makes no backend call; the controller's transparent-import
test uses a real compressed WIF. A new classifier test covers both WIF
versions, the shielded and viewing keys, a single call on failure, the
uncompressed, zivks, testnet, bad-flag and bad-checksum refusals, the
encrypted reason and its lite-log line, the zero-entropy seed and the
recovery log line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Skin handling did more work than it needed:
- the bundled-skin scan fully parsed each of the 9 bundled skin files to
read name, author, dark and images from their first 327-345 bytes. The
build copies the rest of ui.toml into every skin, so each file is
51-54 KB;
- setActiveSkin() reloaded ui.toml right after main() had loaded it, a
second full parse with nothing merged in between;
- in the Windows single-file exe, every getBundledSkinsDirectory() call
(skin refresh, the dragonx entry, each image-dir lookup) re-extracted
all embedded themes with a blind overwrite: more than once per launch,
and again on skin changes.
Now:
- bundled skins are parsed only up to the first table header after
[theme] other than [theme.images]. Anything unusual (no [theme],
images defined later, a parse error in the slice) falls back to the
full parse, and user skins are still parsed in full;
- UISchema tracks whether its state is exactly the base (the last change
was a base load and no hot-reload is pending), and setActiveSkin()
skips reloadBase() in that case;
- the bundled-skins directory is resolved once per process (re-checked
with exists()), and theme extraction rewrites a file only when its
bytes differ, through the new resources::writeFileIfDifferent(). It
compares bytes, not sizes, so a same-length palette edit still
updates.
Measured on the Lite build (median of 5 runs):
- bundled-skin scan: 15 -> 1 ms;
- from "Initializing ObsidianDragon" to the activated skin: 29 -> 12 ms;
- ui.toml is loaded once per launch instead of twice, and the light skin
merges its overlay exactly once.
A Python mirror of the header-slice parse agrees with a full parse on
name, author, dark and images for all 18 source and build-expanded skin
files, and full screenshot sweeps over all 10 skins match the previous
build within noise. New unit tests cover writeFileIfDifferent(): missing
file, identical bytes (mtime untouched), same-length change, and a
longer file truncated.
Behaviour changes:
- a bundled skin with a TOML error after its header is now listed
instead of skipped; the error surfaces only when it is selected;
- deleting a single file inside the extracted bundled-themes dir
mid-session is repaired only at the next launch;
- the "Extracted N embedded bundled themes" count includes files that
were already current.
Not verifiable here: Linux has no embedded themes, so the new
writeFileIfDifferent() ran only in the unit tests and the extraction
path was only compiled, in the Windows cross-build. That a second
Windows launch leaves the theme files' mtimes untouched is still to be
checked on Windows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CMake turned every res/lang/*.json into an xxd header that i18n.cpp
compiled in as a fallback, on every platform. Only the Windows
single-file exe needs it: the Linux zip and AppImage and the macOS .app
always ship res/lang, and loadLanguage() reads the loose file first. On
Linux the embedded copy added about 1.5 MB to the binary, and every
translation edit recompiled i18n.cpp.
A new option, DRAGONX_EMBED_LANG, defaults to ON for WIN32 and OFF
elsewhere:
- ON without xxd is now a configure error (it used to warn, then fail to
compile i18n.cpp on the missing headers);
- i18n.cpp compiles the embedded includes and the fallback only when ON;
- outside Windows, loadLanguage() also tries
<exe>/../share/<app>/res/lang (the cmake --install layout and the
full-node AppImage) and <exe>/../Resources/res/lang (the macOS .app
binary run directly), so those layouts find the loose files whatever
the working directory; before, only the embedded copy covered that.
Measured:
- full-node Linux binary: .data 1,699,696 -> 168,592 bytes; stripped
19,983,136 -> 18,456,128 bytes (-1.53 MB);
- with the ImGui demo stubs, the Linux zips and AppImages are
0.50-0.55 MB smaller, with identical file lists including all 8
language files;
- a Lite build started from an unrelated working directory loads the
ja.json next to the binary (2422 strings), and the packaged Lite zip
and AppImage load ja.json with no new not-found or failed lines;
- Windows keeps the embedded copy: the 8 language headers are generated
and the ja.json bytes are in the exe.
A new test loads "de" from the loose files and checks a translated
string; with bin/res/lang moved away exactly its two assertions fail.
Behaviour changes on Linux and macOS: a missing or corrupt res/lang now
falls back to English instead of the embedded copy, and a translation
edit needs only the copy_langs step instead of a recompile.
Not verifiable here: the macOS .app in a non-English language, and the
Windows single-file exe at runtime.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While the node-status banner shows, its detail line was fitted every
frame by popping one character at a time and re-measuring the whole
"· " + detail + "…" string: O(L^2) per frame in the detail length L,
which adds up on the ~1.5 KB Windows crash report. The pop also left a
dangling UTF-8 lead byte before the "…", so a cut in non-ASCII text drew
replacement characters in place of the ellipsis.
- util::textfit::ellipsizeTail builds the same string in O(L + m log m),
m being the length of the line the cut lands in: ImGui measures
multi-line text as its widest line, so the old loop could only stop
inside the first line that overflows on its own. Byte-identical for
ASCII; the cut now lands on a code-point boundary.
- EllipsisFitCache keeps the result until the detail, budget, font size,
font (by FontId) or rasterizer density changes, so an unchanged frame
costs one string compare.
- When ImGui would draw a line wider than the per-line split predicts
(a malformed byte joined with the following newline, as in CP-1252
output from the Windows daemon), the old whole-string loop is used for
that text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TruncateToWidth, the middle "front...back" ellipsis for addresses, pool
URLs, paths, labels and the status bar, cut at byte offsets: a
multi-byte character at either cut was split into invalid UTF-8 and
drawn as replacement characters (e.g. a translated Cyrillic or CJK
status). It also tried front lengths from n/2 down until one fit,
building and measuring a new string for each: up to O(n^2) per
truncated label per frame.
util::textfit::middleEllipsis keeps the same contract and is
byte-identical for ASCII, but snaps the front cut down and the back cut
up to code-point boundaries, and finds the largest fitting front length
by bisection into one reused buffer: O(log n) measures for single-line
text. Text containing a newline keeps the linear scan, because its
measured width (the widest line) does not grow steadily with the cut.
text_fit.h also gains largestFittingPrefix, a bisection over code-point
boundaries; its first caller is the node-status banner in a following
change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With any console filter on, each batch of new output rescanned all N
lines to rebuild the visible set. A text filter lowercase-copied the
needle and every line to test it: O(total characters) and 2N
allocations per batch.
When the filter is unchanged and the model only appended or evicted
lines since the last pass, the visible indices drop the evicted lines
and shift down, and only the new lines are tested. The result equals
a full rescan, since line text and channel never change and the
filtered view has no folds. A filter change, Clear, or a model window
that doesn't follow on from the last one still rescans.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each batch of new output re-wrapped all N visible lines glyph by glyph,
allocating a fresh segment vector per line; a line evicted at the
10,000-line cap shifted every index, so nothing could be kept. And on
every frame, idle or not, seeding the scanline shading summed the wrap
rows of every line above the view.
- The model numbers its lines and the view keeps one wrap per line,
aligned by that number, so an eviction drops a prefix instead of
forcing a rebuild. New output wraps only the new lines; the layout is
then a prefix sum over the N visible lines, with no measuring and no
per-line allocation.
- The wraps are kept while the wrap width, line height, font size, font
(by ImFont::FontId) and rasterizer density are exactly unchanged. A
line-spacing change only re-sums heights; filters and fold toggles
reuse the cached wraps. A resize drag still re-wraps every visible
line per frame, as before, but reuses their storage.
- The scanline seed is read from the prefix sum: O(1) per frame.
Heights, offsets and segments are bit-identical to the old rebuild. A
font reload at an unchanged size (the colour-emoji toggle) now re-wraps
the console at once; before, it waited for the next line of output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Overview address list built all N rows on every frame (icons,
labels, balances, buttons, an InvisibleButton and a context-menu
check per address) and allocated a vector of N row positions, however
few rows fit on screen; the edge mask then walked all their vertices.
An ImGuiListClipper now submits only the rows that intersect the
list's clip rect, plus:
- one guard row on each side, so dividers and anti-aliased edges at
the clip boundary are drawn as before;
- the row being dragged and the row whose context menu is open, so
drag-to-reorder and the menu keep working when they scroll away;
- the rows keyboard navigation targets (kept by the clipper itself).
Before each row the cursor is put back exactly where the unclipped
loop left it, so the density-scaled spacing, which depends on the
cursor position, and every row's geometry are unchanged. Row tops are
computed from the index, so the per-frame vector is gone, and the
scroll extent is the same. The row model (sort, filter) is still
rebuilt over all addresses each frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ApplyScrollEdgeMask, which fades a scroll area's content at its top
and bottom edges, walked every vertex the area emitted on every frame
and tested both edges per vertex, even when the content fit without
scrolling and no vertex could ever be written. It now returns before
the walk when neither edge fades.
The fade maths moved unchanged into scroll_edge_fade.h and is tested
against the old inline expression, so rendering is identical. All six
callers benefit without an edit: the Overview address list, Mining's
recent blocks, Console, History, Explorer and Peers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Mining tab's earnings card walked all N wallet transactions on
every frame to total Today / Yesterday / All time and pick the 4 most
recent rows: four string compares per transaction plus a memo search
on receives. It also ran localtime and mktime every frame to find
local midnight.
The pass is now a pure function behind a one-slot cache keyed on
WalletState::tx_revision, the transaction count, the filter pill, the
Solo/Pool mode, solo support and local midnight, with a 2 s maximum
age as a safety net. It reruns only when one of those changes or the
2 s age runs out, instead of every frame. The totals are bit-identical
(same loop, same summation order), and crossing local midnight still
moves Today into Yesterday at once.
Local midnight is recomputed only when the clock second changes,
through the shared util::localTime; a failed localtime now yields a
zeroed struct instead of an uninitialised one. The "x ago" labels and
Est. Daily are still computed per frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DanSandClaude Opus 4.8